Crate & Barrel Paterson Corner Media Stand, Paterson Corner Media Stand C1 Assembly Instruction
PATERSON CORNER MEDIA STAND
ASSEMBLY HARDWARE
Thank you for purchasing the Paterson Corner Media
Stand. This page lists all the contents included in the
box. Please take time to identify the hardware as well as
the individual components of this product. As you
unpack and prepare for assembly, place the contents on
a carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
6 - cam
dowels
12 - large
screws
Missing hardware? Please call 800.606.6387 for replacements.
screws
2 - barrel
nuts
10 - small
bolts
6 - cams
2 - large
bolts
4 - shelf
pins
4 - pull bolts26 - wood
4 - hinges
WALL MOUNTING HARDWARE
2 - wall
straps
2 - wall
brackets
2 - anti-tip
brackets
2 - plastic
anchors
2 - large
screws
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead power tools)
24 - small
screws
4 - small
screws
1 - top panel
2 - small side panels
(1 left, 1 right)
Made in China - r13 Page 1 of 6
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
2 - large side panels
1 - base
1 - shelf
2 - doors
(1 left, 1 right)
1 - back panel
2 - pulls
PATERSON CORNER MEDIA STAND
NOTE: Do not over
tighten the bolts
top panel
A
B
base
NOTE: Do not over
tighten the cam screws
1 A) Fit 13 wood dowels into top panel as shown.
B) Insert 6 cam screws into base as shown. Secure, but
do not over tighten, cam screws using a phillips head
screwdriver.
back panel
large
side panel
top panel
NOTE: Make sure
ledge on panel is
positioned as shown
2 Fit pre-installed dowels of top panel into corresponding holes of large side panel. Secure large side panel
with 2 small bolts as shown, using a phillips head
screwdriver. Do not over tighten the bolts.
NOTE: Make sure
ventilation holes of panel
are positioned as shown
3 Fit pre-installed dowels of top panel into corresponding
holes of back panel. Secure back panel with 2 small
bolts as shown.
large
side panel
4 Fit pre-installed dowels of top panel into corresponding
holes of remaining large side panel. Secure large side
panel with 2 small bolts as shown.
Made in China - r12 Page 2 of 6
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...