PATERSON BOOKCASE
ASSEMBLY HARDWARE
Thank you for purchasing the Paterson Bookcase. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or
padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
6 - small
bolts
6 - barrel
nuts
6 - large
bolts
12 - shelf
pins
20 - wood
dowels
Missing hardware?
Please call 800.606.6387
for replacements.
10 - cam
screws
WALL MOUNTING HARDWARE
1 - wall
strap
1 - wall
bracket
1 - anti-tip
bracket
1 - plastic
anchor
1 - large
screw
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead power tools)
10 - cams
2 - small
screws
1 - top panel
1 - back panel
Made in China - r01 Page 1 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 - base
2 - side panels
(1 left, 1 right)
1 - fixed shelf
1 - front
frame
3 - adjustable
shelves
PATERSON BOOKCASE
B
NOTE: Make sure arrows
on each cam point toward
left side
panel
right side
panel
NOTE: Do not
over tighten the
cam screws
1 A) Insert 4 wood dowels, and 2 cam screws into left
and right side panels as shown. Secure, but do not over
tighten, cam screws using a phillips head screwdriver.
B) Insert 3 cams into left and right side panels as
shown. Make sure arrows on each cam point toward
nearest edge with holes.
nearest edge with holes
A
A
fixed shelf
B
front frame
2 A) Insert 4 wood dowels and 4 cams into fixed shelf
as shown.
B) Insert 8 wood dowels and 6 cam screws into front
frame as shown.
fixed shelf
left side
panel
3 Fit dowels of fixed shelf into corresponding holes of
left side panel as shown. With a screwdriver, turn each
cam clockwise until it securely engages each cam screw.
right side
panel
4 Fit dowels of fixed shelf into corresponding holes of
right side panel. Secure all cams with a screwdriver.
Made in China - r01 Page 2 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
PATERSON BOOKCASE
NOTE: Make sure hole of
barrel nut aligns with the
hole in nearest edge
front frame
5 Fit dowels of front frame into corresponding holes of
left and right side panels as shown. Secure all cams.
back
panel
A
A
base
B
NOTE: Do not over
tighten the bolts
B
6 A) With the assistance of another adult, place
assembled unit face down onto a clean, padded surface.
Insert 2 barrel nuts into left/right side panels and front
frame as shown. Using a screwdriver, align hole of each
barrel nut with the hole in nearest edge.
B) Fit dowels of assembled unit into corresponding holes
of base. Secure base with 6 large bolts. Make sure bolts
securely engage each barrel nut.
top
panel
7 Slide back panel into corresponding grooves of
assembled unit as shown.
Made in China - r01 Page 3 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
8 With the assistance of another adult, position unit
upright. Fit dowels of assembled unit into corresponding
holes of top panel as shown. Secure top panel with 6
small bolts as shown.
PATERSON
BOOKCASE
shelf
pin
adjustable
shelf
9 Insert 12 shelf pins at desired shelf heights as shown.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the wood is finished with a protective clear lacquer.
10 Place 3 adjustable shelves onto shelf pins. Make sure
shelves are securely supported by each shelf pin.
Assembly is now complete.
Made in China - r01 Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 4 of 5
PATERSON BOOKCASE
wall
F
C
plastic
anchor
wall
bracket
strap
D
large
screw
small
A
screw
anti-tip
bracket
OPTIONAL WALL MOUNTING INSTRUCTIONS:
For added safety and stability, it is recommended that the
wall mounting hardware be installed. For safe mounting, it
is essential to use wall anchors appropriate to your wall type
(i.e. plaster, drywall, concrete, etc.). Mount to wood studs
whenever possible.
A) Attach 1 anti-tip bracket to top of bookcase as shown,
using 2 small screws.
B) Determine the final location of bookcase. Mark position
on the wall, approximately 2" below the bracket mounted to
the back of the bookcase.
C) Drill a pilot hole in the wall stud. If the wall stud is not
available, drill a hole in the wall that is slightly smaller in
diameter than the anchor. Gently tap the plastic anchor
until the flange of the anchor is flush with the wall.
D) Attach the wall bracket to the wall by inserting 1 large
screw through the wall bracket and into the wall anchor in
the wall.
E) Place the unit so the anit-tip bracket on the back edge is
aligned with the wall bracket.
F) Lace one end of the wall strap through both brackets,
and into the other end of the strap.
G) Pull the strap tightly until secure.
NOTE:
If you are unsure about your wall type or what
mounting method you should use, consult a
qualified professional or your local hardware
store.
Wall mounting assembly is now complete.
Made in China - r01 Page 5 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...