Page 1
PATERSON BENCH
HARDWARE
Thank you for purchasing the Paterson Bench. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
dowels
8 - barrel
nuts
8 - cam
screws
Missing hardware?
Please call 800.606.6387 for replacements.
8 - cams22 - wood
8 - large
bolts
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
2 - side panels
(1 left, 1 right)
1 - back panel 1 - cushion
Made in China - r04 Page 1 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 - partition 1 - top panel
1 - base
(sold separately)
Page 2
PATERSON BENCH
NOTE: Make sure arrow on
each cam points toward nearest
edge with holes
partition
A
B
top panel
NOTE: Do not over
tighten the cam screws
1 A) Insert 2 cams and 4 wood dowels into partition as shown. Make sure arrow on each cam
points toward nearest edge with holes.
B) Insert 8 cam screws into top panel as shown. Secure, but do not over tighten, with a phillips
head screwdriver.
NOTE: Make sure cams in
partition are secured to
cam screws in top panel
top panel
partition
2 Fit dowels of partition into corresponding holes of top
panel as shown. Using a screwdriver, turn each cam
clockwise until it securely engages each cam screw.
left side panel
right side panel
3 Insert 2 cams and 4 wood dowels in left and right
side panels as shown.
Made in China - r04 Page 2 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 3
PATERSON BENCH
right side panel
NOTE: Make sure pilot holes
in back panel face outwards
during assembly
back panel
4 Insert 2 cams and 10 wood dowels into back
panel as shown.
NOTE: Make sure cams in back/side
panels are secured to cam screws in
top assembly
back panel
NOTE: Make sure the cams in
back/side panels are positioned
at the bottom during assembly
left side panel
5 Fit dowels of back panel into corresponding holes of
left and right side panels as shown.
NOTE: Make sure hole
in barrel nut aligns with
hole in nearest edge
back/side
assembly
top
assembly
6 With assistance of another adult, carefully fit dowels
of back/side assembly into corresponding holes of top
assembly. Secure cams.
Made in China - r04 Page 3 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
7 Insert 8 barrels nuts into assembly as shown. Using
a screwdriver, align hole in barrel nut with holes in
nearest edge.
Page 4
PATERSON BENCH
NOTE: Do not over tighten
the bolts
base
cushion
(sold separately)
8 With assistance of another adult, fit dowels of assembly into corresponding holes of base. Using a screwdriver, attach base with 8 large bolts and through each
barrel nut as shown. Do not over tighten the bolts.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use
furniture wax or polish as the wood is finished
with a protective clear lacquer.
9 With assistance of another adult, position unit
upright. Place cushion (sold separately) onto top
assembly as shown.
Assembly is now complete.
Made in China - r04 Page 4 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 5
PATERSON BACK PANEL
ASSEMBLY HARDWARE
9 - bolts
WALL MOUNTING HARDWARE
1 - wall
strap
Missing hardware? Please call 800.606.6387 for replacements.
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
Thank you for purchasing the Paterson Back Panel.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
ASSEMBLY
With the assistance of another adult, position back panel
assembly as shown. Attach back panel assembly to bench
assembly (sold separately) with 9 bolts as shown. Secure,
but do not over tighten, bolts with a phillips head screwdriver.
1 - wall
bracket
1 - anti-tip
bracket
1 - bench assembly
(sold separately)
1 - plastic
anchor
back panel
assembly
1 - large
screw
1 - back panel
assembly
2 - small
screws
Assembly is now complete.
NOTE: Do not over
tighten the bolts
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use
furniture wax or polish as the wood is finished
with a protective clear lacquer.
Made in China - r03 Page 1 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
bench assembly
(sold separately)
Page 6
PATERSON BACK PANEL
wall
plastic
anchor
C
wall
bracket
strap
WALL
back panel
assembly
D
large
screw
small
A
screw
F
anti-tip
bracket
OPTIONAL WALL MOUNTING
INSTRUCTIONS
For added safety and stability, it is recommended that the wall mounting
hardware be installed. For safe mounting, it is essential to use wall
anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.).
Mount to wood studs whenever possible.
A) Attach anti-tip bracket to top of back panel assembly using 2 small
screws as shown.
B) Determine the final location of unit. Mark position on the wall,
approximately 2" below the anti-tip bracket mounted to the back of the
unit.
C) Drill a pilot hole in the wall stud. If the wall stud is not available, drill a
hole in the wall that is slightly smaller in diameter than the anchor. Gently
tap the plastic anchor until the flange of the anchor is flush with the wall.
D) Attach wall bracket to the wall by inserting 1 large screw, and into
the plastic anchor in the wall.
E) Place the unit so the anti-tip bracket on the back edge is aligned with
the wall bracket on the wall.
F) Lace one end of the wall strap through both brackets, and into the
other end of the strap.
G) Pull the strap tightly until secure.
NOTE: If you are unsure about
your wall type or what mounting
method you should use, consult
a qualified professional or your
local hardware store.
Wall mounting assembly is now complete.
Made in China - r3 Page 2 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...