Crate & Barrel Passages Console and Bookcases Assembly Instruction

PASSAGES MEDIA STORAGE CONSOLE

HARDWARE

Thank you for purchasing the Passages Media Storage
Console. This page lists all the contents included in the

box. Please take time to identify the hardware as well as
the individual components of this product. As you
unpack and prepare for assembly, place the contents on
a carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

COMPONENTS

4 - large
screws

32 - flat
washers

Missing hardware? Please call 800.606.6387 for replacements.

28 - small
bolts

32 - spring
washers

4 - large
bolts

4 - pull
screws

2 - pulls

20 - small
screws

8 - shelf
pins

TOOLS REQUIRED

phillips head screwdriver

1 - top
panel

1 - bottom
panel

Made in China - r08 Page 1 of 3

Customer Service 800.967.6696 | www.crateandbarrel.com

1 - fixed
shelf

2 - side panels

(1 left, 1 right)

2 - adjustable
shelves

1 - back
panel

1 - small
parition

1 - front
frame

1 - large
partition

4 - legs

PASSAGES MEDIA STORAGE CONSOLE

small
partition

fixed
shelf

1 Fit dowels of small partition into corresponding
holes of fixed shelf as shown. Attach fixed shelf with 2

large screws. Secure screws with a phillips head
screwdriver.

A

A

large
partition

B

B

bottom
panel

2 A) Fit dowels of large partition into corresponding holes of
assembled unit as shown. Secure with 2 small bolts, 2 spring
washers, and 2 flat washers, using a screwdriver.
B) Fit dowels of assembled unit into corresponding holes of
bottom panel as shown. Secure with 2 large screws.

left side
panel

right side
panel

3 Fit dowels of assembled unit into corresponding
holes of left and right side panels as shown. Secure
with 8 small bolts, 8 spring washers, and 8 flat
washer as shown.

top
panel

4 Fit dowels of assembled unit into corresponding
holes of top panel as shown. Secure with 6 small
bolts, 6 spring washers, and 6 flat washers as
shown.

Made in China - r08 Page 2 of 3

Customer Service 800.967.6696 | www.crateandbarrel.com

PASSAGES MEDIA STORAGE CONSOLE

5 With the assistance of another adult, carefully fit dowels
of assembled unit into corresponding holes of front frame
as shown. Secure with 12 small bolts, 12 spring washers,
and 12 flat washers as shown, using a screwdriver.

back
panel

leg

6 Fit dowels of each leg into corresponding holes of
assembled unit as shown. Secure with 1 large bolt, 1 spring

washer, and 1 flat washer as shown, using a screwdriver.

C

A

pull

A

C

9 A) Insert 8 shelf pins at desired shelf heights as shown.
B) Place 2 adjustable shelves into assembled unit. Make sure

8 Attach back panel onto assembled unit with 20
small screws as shown. Secure screws with a
screwdriver.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use
furniture wax or polish as the wood is finished with a protective clear lacquer.

Made in China - r08 Page 3 of 3

Customer Service 800.967.6696 | www.crateandbarrel.com

each shelf is securely supported by shelf pins.
C) Attach 2 pulls to doors of assembled unit with 2 pull screws
per pull as shown. Secure screws with a screwdriver.
Assembly is now complete.

B

adjustable
shelves

shelf
pin