Crate & Barrel Parallel Desk Chair Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

PARALLEL DESK CHAIR

Thank you for purchasing the Parallel Office Chair.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as
the individual components of this product. As you
unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect
them from damage.

B

A

1 A. Fit small end of lift
cylinder into corresponding

hole on the bottom of the
seat assembly as shown.
B. Press fit base onto
bottom of lift cylinder.

IMPORTANT NOTE:
Finalize assembly by
sitting heavily on the chair
a few times. This will
secure all the component
connections.

Made in China - r03

HARDWARE & COMPONENTS

1 - seat assembly

1 - base

Missing hardware? Please call 800.606.6387
for replacements.

1 - lift cylinder

SEAT HEIGHT ADJUSTMENT:

While sitting in the chair,
pull the lever up to lower the seat.
To raise the seat, take your weight
off the chair and pull the lever up.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.

Page 1 of 1