Crate & Barrel Parallel Desk Assembly Instruction
Customer Service 800-967-6696 | http://www.crateandbarrel.com
PARALLEL DESK
Thank you for purchasing the Parallel Desk. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or padded
area to protect them from damage.
Note: 2 people are required to safely assemble this
product.
COMPONENTS
1 - table top
2 - crossbars
2 - leg frames
Made in China - r05
HARDWARE
8 - allen head screws
8 - tube caps
Missing hardware? Please call 800.606.6387 for
replacements.
6 - wood screws
6 - washers
TOOLS REQUIRED
Allen wrench (included)
Phillips head screwdriver
Hammer
x 2
B
Tabs flush
to floor
A
1 A. Insert 1 tube cap into the top of each leg.
B. Position 1 leg frame as shown and fit brackets into open
tube ends of the 2 crossbars. Make sure tabs of crossbars
are positioned as shown, flush with the floor.
C. Align holes in brackets with holes in cross bars and loosely
attach with 2 allen head screws. Do not fully tighten screws.
Page 1 of 2
Customer Service 800-967-6696 | http://www.crateandbarrel.com
PARALLEL DESK
B
x 2
2 A. Insert 1 tube cap into the top of each leg in the
remaining leg frame.
B. Attach leg frame using same method as in Step 1.
Secure each crossbar with 2 allen head screws. Do not
fully tighten screws.
4 Insert 1 tube cap into the open end of each leg. If
necessary, gently tap each tube cap into position with a
hammer.
Made in China - r05
A
3 Position frame assembly onto table top, aligning holes in
tabs with pre-drilled holes in table top. Using a phillips
head screwdriver, secure each tab with 1 wood screw and
1 washer.
x 8
5 At this point, fully tighten all 8 allen head screws with
the allen wrench.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
Page 2 of 2
Loading...