Crate & Barrel Parallel Connecting Corner Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

PARALLEL CONNECTING CORNER

Thank you for purchasing the Parallel Corner Unit. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or padded
area to protect them from damage.
Note: 2 people are required to safely assemble this
product.

COMPONENTS

1 - table top

4 - brackets

1 - leg

Made in China - r03

HARDWARE

20 - wood screws

1 - tube cap

Missing hardware? Please call 800.606.6387 for
replacements.

TOOLS REQUIRED

Phillips head screwdriver

Hammer

B

A

1 A. Place table top upside down on a padded surface.
Attach leg with 4 wood screws. Secure each screw with a
phillips head screwdriver, but do not over tighten.
B. Insert tube cap in bottom of leg. If necessary, gently tap
into place with a hammer.

Page 1 of 2

Customer Service 800-967-6696 | http://www.crateandbarrel.com

PARALLEL CONNECTING CORNER

2 Place 4 brackets into position, aligning holes with
predrilled holes in tabletop. Secure with 2 wood screws
per bracket.

4 Repeat Steps 2 and 3 for the remaining desk. Fully
tighten all wood screws with a phillips head screwdriver.
Assembly is now complete.

Made in China - r03

x 2

B

A

3 A. With the assistance of another adult, position corner
assembly as shown. Slide exposed brackets into space
between the frame and tabletop of the desk.
B. Attach the corner unit by fastening the brackets to the
underside of the desktop with 2 wood screws per bracket.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.

Page 2 of 2