Crate & Barrel Pacific Dark Stain Full Bed, Pacific Dark Stain King Bed, Pacific Dark Stain Queen Bed, Pacific Maple Full Bed, Pacific Maple King Bed Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

PACIFIC FULL, QUEEN, KING BED

Thank you for purchasing the Pacific Bed. This page lists
all the contents included in the box. Please take time to
identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or padded
area to protect
them from damage.
Note: 2 people are required to safely assemble this
product.

COMPONENTS

1 - footboard

1 - headboard

2 - side rails
(1 left, 1 right)

1 - center rail

2 - slat rolls 1 - support leg

Made in Lithuania - r01

HARDWARE

6 - bolts

Missing hardware? Please call 800.606.6387 for
replacements.

1 - medium
screw

12 - small
screws

TOOLS REQUIRED

Small Allen wrench (included)

Large Allen wrench (included)

Phillips head screwdriver

1 With the assistance of another adult, stand headboard
upright. Fit the tabs of the left and right side rails down into
the corresponding slots in the headboard hardware. Make
sure to orient the side rails as shown with the ends of the
rails with the 3 holes secured to the headboard.

Page 1 of 3

Customer Service 800-967-6696 | http://www.crateandbarrel.com

PACIFIC FULL, QUEEN, KING BED

2 Fasten the other ends of the side rails to the footboard
using the same method as Step 1.

B

Side View

4 A. Attach support leg to center rail with 1 medium
screw. Secure with the large allen wrench.
B. Attach center rail assembly to head & footboard by fitting
tabs of head & footboard hardware into slots of center rail
hardware. Make sure the center rail locks in place.

Made in Lithuania - r01

A

B

x 2

3 Fasten 1 bolt into each of the 3 holes at the headboard/side
rail connection. Secure with the small allen wrench.

Slats should
bow upward

5 Place slat roll into position on the side rail supports and
unroll towards the headboard. IMPORTANT: Make sure the
slats bow upwards.

Page 2 of 3

Customer Service 800-967-6696 | http://www.crateandbarrel.com

PACIFIC FULL, QUEEN, KING BED

Made in Lithuania - r01

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.

6 Make sure that the canvas webbing
between the slats is taught.
Secure the slats to the side rails with
12 small screws as indicated in the
illustration.
Note: There will not be pre-drilled
holes in either the slats or the side
rails.
Assembly is now complete.

Page 3 of 3