Customer Service 800-967-6696 | http://www.crateandbarrel.com
PACIFIC 4-DRAWER CHEST
Thank you for purchasing the Pacific Dresser. This
page lists all the contents included in the boxes.
Please take time to identify the hardware as well as
the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage. Note: 2 people are required to safely
assemble this product.
TOOLS REQUIRED
Phillips head screwdriver
Flat head screwdriver
COMPONENTS
1 - left side panel
4 - drawer
bottoms
Made in Lithuania - r05
1 - right side panel
4 - drawer backs
1 - top panel
HARDWARE
31 - cams
16- small
wood screws
L
4 - left case glides
(marked with an "L")
4 - left drawer glides
Missing hardware? Please call 800.606.6387 for replacements.
1 - back panel
4 - left
drawer sides
8 - large
bolts
16 - large
wood screws
1 - bottom panel
4 - right
drawer sides
31 - cam
screws
31 - cam
covers
4 - right case glides
(marked with an "R")
4 - right drawer glides
4 - drawer fronts
24 - machine
screws
8 - drawer
knobs
R
Page 1 of 3
Customer Service 800-967-6696 | http://www.crateandbarrel.com
PACIFIC 4-DRAWER CHEST
Make sure
this arrow
points
towards the
shelf edge
Bottom Panel
(underside)
1 Insert 4 cams into the underside of the bottom
panel, making sure arrows on each cam point towards
the shelf edge as shown.
Cam in
unlocked
position
Cam in
locked
position
B
Make sure
roller wheel
is towards
the front
A
3 A. Using a flat head screwdriver, fasten 2 cam
screws into the lower holes of the left side panel.
B. Using a phillips head screwdriver, turn 2 cams
clockwise to secure bottom panel to the left side panel.
Repeat Steps A and B for the right side panel.
Made in Lithuania - r05
NOTE:
Do not over
tighten the
screws.
Back
Left Panel
2 Atttach 4 left case glides (marked "L") to the left side
panel and the 4 right case glides (marked "R") to the
right side panel as shown. Be sure the wheel on each
glide faces toward the front of each panel. Secure each
glide with 2 machine screws and a phillips head
screwdriver. Do not overtighten the screws.
back panel
The first screw goes in this hole
Right Panel
A
C
B
4 A. Insert 7 cam screws into the underside of the back
panel and secure with a flat head screwdriver.
B. Insert 3 cams into the remaining holes of the bottom
shelf. Make sure arrows point towards the edge.
C. Insert 2 cams into the holes closest to the back edge
of each side panel as shown.
Fit back panel into position and secure all cams by turning
each clockwise with a phillips head screwdriver.
Page 2 of 3
Customer Service 800-967-6696 | http://www.crateandbarrel.com
PACIFIC 4-DRAWER CHEST
D
A
C
Only these
2 holes are used
View from
underside of
drawer assembly
x 4
B
5 A. Insert 4 cam screws into the top panel and secure
with a flat head screwdriver.
B. Insert 4 cams into the tops of side panels. Fit top
panel into position and secure all cams with a phillips head
screwdriver.
C. Conceal all cams by inserting cam covers into all cams.
C
A
B
7 A. Insert 4 cams into holes in the front of the drawer
side panels.
B. Insert 4 cam screws into the drawer front. Fit drawer
front into position and secure all cams with a screwdriver.
C. Hold drawer knob in place while using a phillips head
screwdriver to tighten the large bolt.
D. Turn drawer assembly upside down and attach right
and left drawer glides with 4 small wood screws. Make
sure the wheels extend beyond the drawer back as shown.
Repeat Steps A-D for the remaining 3 drawers.
Made in Lithuania - r05
A
B
drawer
bottom panel
x 4
6 A. Attach left & right drawer sides to drawer
back with 4 large wood screws. Do not over tighten
the screws.
B. Slide drawer bottom panel into grooves in drawer
side and back panels. Make sure the cut-off corners
of the bottom panel face out as illustrated.
Repeat steps A & B for the remaining 3 drawers.
8 Insert 4 drawer assemblies into the case, aligning
wheels of drawer glides with rail of case glides.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
Page 3 of 3
Loading...