Page 1
2400086 (82B900)
EN | DE| ES| IT| FR| PT| NL| RU
PL| CS| SK| SL| HR| HU| RO| BG
LT| LV| ET
|
| FI| | SV|
| EL| | AR|
| NO|
| TR|
| DA|
| HE|
cramer.eu
Page 2
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
EN
English (original instructions)
SPECIFICATIONS
Type 82B900
Voltage 82V DC
AIR volume 14.5 m³/min
Air speed 200 KM/H
Weight (Without
Battery)
Battery Pack
Charger 82C1G/82C2/82C6
Sound pressure
level
Sound power level
Vibration level
Double-insulated
construction.
2.7 kg
82V220G/82V430G
82V220/82V430
88 dB(A), k:3.0 dB(A)
100 dB(A)
2
Ah: 2.5 m/s
, k= 1.5 m/s
2
DESCRIPTION
See Figure 1.
1. BLOWER TUBE
2. TRIGGER
3. BATTERY RELEASE BUTTON
ASSEMBLY
UNPACKING
Carefully remove the product and any accessories
from the box.
Inspect the product carefully to make sure no
breakage or damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
If any parts are damaged or missing, please call your
Cramer service centre for assistance.
PACKING LIST
See Figure 2.
Blower Tube
Blower
Operator’s Manual
WARNING
Do not use this product if any parts on the Packing
List are already assembled to your product when you
unpack it. Parts on this list are not assembled to the
product by the manufacturer and require customer
installation. Use of a product that may have been
improperly assembled could result in serious personal
injury.
ASSEMBLING THE BLOWER TUBE
WARNING
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from
the tool when assembling parts.
Align either of the grooves (4) in the tube with the
tabs (5) on the blower housing. Push the tube into the
blower housing until the tab engages the grooves.
See Figure 3.
Turn the tube in the direction of the arrow until
both of the tabs slide into the lock positions.
See Figure 4.
TO REMOVE/INSTALL BATTERY PACK
See Figure 5.
IMPORTANT! The battery pack is not charged when it
place the battery pack in the battery charger and charge.
Make sure to read all safety precautions, and follow the
instructions in the Battery Charger manual.
TO REMOVE BATTERY PACK
Press and hold the battery release button with firm
grip.
Grasp the trigger handle firmly. Pull the battery pack
out of the handle.
TO INSTALL BATTERY PACK
Align the tongue of the battery pack with the cavity in
the handle housing.
Grasp the trigger handle firmly.
Insert the battery into the battery opening until the
battery release button (3) locks into place.
Push the battery pack into the handle until both sides
lock. The latch button will click when locked into place.
Do not use force when inserting the battery pack. It
should slide into place and click.
WARNING
Follow these instructions in order to avoid injury and to
• Replace the battery pack or the charger immediately
if the battery case or charger cord is damaged.
• Verify that the switch is in the OFF position before
inserting or removing the battery pack.
• Verify that the battery pack is removed and the switch
is in the OFF position before inspecting, adjusting, or
performing maintenance on any part of the blower.
• Read, understand, and follow the instructions
contained in the section entitled Charging Procedure.
1
Page 3
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
EN
English (original instructions)
WARNING
to prevent accidental dislodging. It may require a strong
pull to remove it.
WARNING
Always take care of your feet, children, or pets around
you when pressing the battery release button. Serious
injury could result if the battery pack falls. NEVER
remove the battery pack when in a high location.
OPERATION
WARNING
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a sec-
WARNING
Always wear eye protection with side shields marked to
comply with ANSI Z87.1, along with hearing protection.
Failure to do so could result in objects being thrown
into your eyes and other possible serious injuries.
WARNING
Do not use any attachments or accessories not recommended by the manufacturer of this product. The use
of attachments or accessories not recommended can
result in serious personal injury. Before each use,
inspect the entire product for damaged, missing, or
loose parts, such as screws, nuts, bolts, caps,etc.
Tighten securely all fasteners and caps and do not
operate this product until all missing or damaged parts
are replaced.
CHARGE BEFORE FIRST USE.
WARNING
Always remove battery pack from the product when
you are assembling parts, making adjustments,
cleaning, or when not in use. Removing battery pack
will prevent accidental starting that could cause serious
personal injury.
STARTING /STOPPING THE BLOWER
Before start-up, make sure that the blower is in perfect
condition to guarantee safe operation.
Ensure that the battery is installed in the blower.
Squeeze the trigger to start the blower.
Release the trigger to stop.
WARNING
To avoid serious personal injury, wear goggles or
safety glasses at all times when operating this unit.
Wear a face mask or dust mask in dusty locations.
WARNING
To prevent serious personal injury or damage to the
unit, make sure the blower tube is in place before
operating the unit.
WARNING
To avoid serious personal injury, do not wear looseclothing or articles such as scarves, strings, chains,
ties, etc., that could be drawn into the air vents. Tie
back long hair to make sure it does not get drawn into
the air vents.
OPERATING THE BLOWER
To keep from scattering debris, blow around the outer
edges of a debris pile. Never blow directly into the
center of a pile.
To reduce sound levels, limit the number of pieces of
equipment used at any one time.
Use rakes and brooms to loosen debris before
blowing. In dusty conditions, slightly dampen surfaces
when water is available.
Conserve water by using power blowers instead
of hoses for many lawn and garden applications,
including areas such as gutters, screens, patios, grills,
porches, and gardens.
Watch out for children, pets, open windows, or freshly
washed cars, and blow debris safely away.
After using blowers or other equipment, clean up.
Dispose of debris properly.
2
Page 4
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
EN
English (original instructions)
AIR VENTS
Never cover air vents. Keep them free of obstructions and
debris. They must always remain clear for proper motor
cooling.
MAINTENANCE
WARNING
electric shock, remove the battery pack before adjusting, inspecting, or cleaning the blower.
CLEANING
Remove the battery pack.
Brush or blow dust and debris out of the air vents
using compressed air or a vacuum. Keep the air vents
free of obstructions, sawdust, and wood chips. Do not
spray, wash, or immerse the air vents in water.
Wipe off the housing and the plastic components
using a moist, soft cloth. Do not use strong solvents
or detergents on the plastic housing or plastic
components. Certain household cleaners may cause
damage, and may cause a shock hazard.
BATTERY PACK
Store the battery pack charged.
Once the charging light turns green, remove the
battery from the charger and disconnect the charger
from the outlet.
Recharge the battery pack anytime you have notice
there is less power. Never let the battery pack become
completely discharged.
After charging, the battery pack may be stored in the
charger as long as the charger is not plugged in.
WARNING
When servicing use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING
based products, penetrating oils, etc. come in contact
with plastic parts. They contain chemicals that can
damage, weaken or destroy plastic.
STORING THE BLOWER
Clean the blower thoroughly before storing. Store the
blower in a dry, well-ventilated place that is inaccessible
to children. Keep away from corrosive agents such as
garden chemicals and de-icing salts.
Store and charge your batteries in a cool area.
Temperatures above or below normal room
temperature will shorten battery pack life.
Once the light on the charger turns solid green,
remove the battery from the charger and disconnect
the charger from the outlet.
Do not store the battery pack on the tool.
Never store batteries in a discharged condition. Wait
for battery pack to cool and fully charge immediately.
All batteries gradually lose their charge. The higher
the temperature, the quicker they lose their charge.
If you store your unit for long periods of time without
using it, recharge the batteries every month or two.
This practice will prolong battery pack life.
TROUBLESHOOTING
PROBLEM POSSIBLE
Motor fails to
start when
switch is
depressed.
Unit will not
start.
Unit will not
blow.
CAUSE
Battery is
not secure.
Battery
is not
charged.
Defective
speed
switch.
Defective
motor.
Defective
PCB board.
Blocked
tube.
SOLUTION
Check to ensure the
latches are tightly
secured into place on
the back of the
blower and the battery.
Charge the battery
pack according to the
instructions included
with your battery.
Have the defective
parts replaced by
an authorized service
center.
Clear the blockage.
WARNING
To avoid serious personal injury, always remove the
battery pack from the tool when cleaning or performing
any maintenance.
3
Loading...