Craftsman 706.137510 Instruction Manual

Operator’s Manual

Please indicate the following information from the service part drawing provided.

SAFETY

SAFETY WARNINGS AND CAUTIONS:

C DO NOT stand on this product. You may fall which may cause personal injury.
C WEAR SAFETY GLASSES when removing or repositioning the slides. The tool

could slip which may cause personal injury.

C When moving this product, do not pull it. Push the product to prevent personal

injury.

C Stacked products should be bolted together. The products could become unstable

and tip, which may cause personal injury or product damage.

C Handle and swivel casters must be attached on the same side of the product.
C USE THE BRAKES when not moving this product. This will prevent the product

from rolling, which may cause personal injury or product damage.

C BE CAREFUL when opening more than one drawer. The product may become

unstable and tip, which may cause personal injury or product damage.

C DO NOT mount this product on a truck bed or any other moving object. This may

cause personal injury or product damage.

C DO NOT step in the drawers. You may fall which may cause personal injury.
C Appropriately secure this product before moving it with a forklift.
C DO NOT tow with power equipment. The product could tip, which may cause

personal injury or product damage.

C DO NOT alter this product in any manner. For example, do not weld external

lockbars or attach electrical equipment. This may cause product damage or
personal injury.

C Keep the product on level surfaces. The product may become unstable and tip if

stored or moved on an un-level surface, which may cause personal injury or
product damage.

C When rearranging the drawers, be careful not to put too many heavy items in the

top drawers. The product could become top heavy and tip, which may cause
personal injury or product damage.

C BE CAREFUL when closing the cover. Remove hands before the cover closes

completely to prevent personal injury.

C Close the cover and lock the drawers and doors before moving this product. The

drawers or doors could come open and make the product unstable and tip, which
may cause personal injury or product damage.

C When locking this product, close the drawers before closing the cover for lock bars

to work properly.

C The maximum weight for each drawer should be no more than 25 pounds.
C The maximum product weight, including contents, should be no more than 300

pounds for tool centers.

Model Number: ____________________________
Model Description: _________________________
*Your model may vary from the one shown.
CAUTION: Read and follow all Safety Rules and Operating Instructions before

first use of this product. Retain this document for future reference.
Sears, Roebuck and Co., Hoffman Estates, IL 60179, USA

F890A11

Call 1-800-4MY-HOME (1-800-469-4663) for Service Parts.

Refer to Service Parts Drawing for full listing of Service Parts.

2

HARDWARE:

NOTE: Not all instructions apply to
your specific unit.

ASSEMBLY

REMOVE CHEST FROM ROLL­AWAY:

C The unit comes with the chest

secured to the inside of the roll-away
by either two or four 1/4-20 bolts.

C Lay the roll-away down on its back.

Use packaging material to protect the
paint finish.

C Remove the securing bolts from the

underside of the roll-away. Save the
screws for mounting the chest to the
roll-away.

C Remove the chest.

CASTER INSTALLATION:

NOTE: Use adequate manpower for this
operation.
C Lay the roll-away down on its back.

Use packaging material to protect the
paint finish.

C Mount both swivel casters on the

same side of the roll-away. The swivel
caster with the brake goes to the front
of the unit.

C Attach casters using 1/4-20 x 7/16 hex

screws and 1/4-20 hex nuts. Wrench
tighten.

C Return the roll-away to its upright

position.

MOUNTING INTERMEDIATE
CHEST:

C Remove all drawers necessary in

order to attach units. Follow the
drawer removal and installation
instructions in the operation section.

C Position the intermediate chest on the

cabinet. Using the intermediate chest
bottom as a template, mark the
mounting hole locations onto the roll­away top. At each mark drill a 5/16"
diameter hole.

C Attach the cabinet to the intermediate

chest using the bolts supplied with the
units.

C Attach the top chest to the

intermediate chest using the bolts
supplied with the units.

C Reinstall all drawers. Follow the

drawer removal and installation
instructions in the operation section.

MOUNTING CHEST:

C Remove the drawer from the roll-away

(refer to the drawer removal
instructions).

C Lift the chest onto the roll-away. Line

up the holes in the bottom of the chest
with the holes in the top of the roll­away.

C Attach the chest using two 1/4-20

screws that were used to secure the
chest to the bottom of the roll-away.

C Wrench tighten all screws.
C Replace the drawer (refer to the

drawer installation instructions).

C To remove the chest, reverse the

procedure.

RISER ASSEMBLY:

NOTE: When assembled, the riser
should be the same size, left to right, as
the chest. Use adequate manpower for
this operation.
C Assemble the sides and the back

(flange side up) together using four 8­32 x 1/4 pan head screws and four 8­32 hex nuts. Finger tighten.

C Position the riser assembly on the roll-

away. Secure using four 10-16 x 1/2
sheet metal screws. Wrench tighten.

C Position the chest on the riser. Secure

using four 10-16 x 1/2 sheet metal
screws. Wrench tighten.

C Wrench tighten the risers four 8-32 x

1/4 pan head screws and 8-32 hex
nuts.

Chest

Back

Side

Cart

SHELF INSTALLATION:

C Place the shelf in the roll-away and

line up the holes.

• Insert four plastic rivets through the
sides of the roll-away.

C Press the rivet pin firmly into the rivet

body to secure the shelf.

C The shelf may be removed by prying

the rivet pins out using a screwdriver.

3

4