Craftsman 486247072, 486247071, 486247070 Owner’s Manual

Operator's IVlanuai

CRnFTSMRH°

ROFESSIONAL VAC

IVlodei No. 486.24707

DO NOT RETURN TO STORE For Missing Parts or Assembly

Questions Call 1-866-576-8388

CAUTION:

Before using this product, read this manual and follow all Safety

Rules and Operating Instructions.

,, Safety ,, Assembly

,, Operation ,, Maintenance

,, Parts

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

www.sears.com/craftsman

PRINTED IN U.S.A. FORM NO. 40784 (08/13/08)

SAFETY RULES .............................................................. 3

ACCESSORIES ............................................................... 5

FULL SIZE HARDWARE CHART .................................... 6

CARTON CONTENTS ..................................................... 8

ASSEMBLY ...................................................................... 9

OPERATION .................................................................. 18

STORAGE AND OPTIONAL USE ................................. 21

TROUBLESHOOTING ................................................... 21

SLOPE GUIDE .............................................................. 27

REPAIR PARTS ILLUSTRATION ........................ 22,24,26

REPAIR PARTS LIST ................................................ 23,25

PARTS ORDERING/SERVICE ................... BACK COVER

MAINTENANCE ............................................................ 20

CRAFTSMAN PROFESSIONAL LiMiTED WARRANTY Two Years on Powered Tractor Attachment

When operated and maintained according to all supplied instructions, if this Powered Attachment fails due to a defect in material or workmanship within two years from the date or purchase, call 1-800-4-MY-HOME® to arrange for free repair.

This warranty applies for only one year from the date of purchase if this Powered Attachment is ever used for commercial or rental purposes.

During the first year of purchase, there will be no charge for warranty service in your home. For your convenience, in- home warranty service will still be available after the first year of purchase, but a trip charge will apply. This charge will be waived if you transport the tractor to an authorized Craftsman drop-off location. For the nearest authorized location, call

1-800-4-MY-HOME®. This warranty covers ONLY defects in material and workmanship. Sears wi[[ NOT pay for:

• Expendable items that become worn during normal use, including but not limited to blades, spark plugs, air cleaners,

belts, and oil filters. Standard maintenance servicing, oil changes, or tune-ups.

Tire replacement or repair caused by punctures from outside objects, such as nails, thorns, stumps, or glass. Tire or wheel replacement or repair resulting from normal wear, accident, or improper operation or maintenance.

Repairs necessary because of operator abuse, including but not limited to damage caused by improper transportation, impacting objects that bend the frame or crankshaft, or over-speeding the engine.

Repairs necessary because of operator negligence, including but not limited to, electrical and mechanical damage caused by improper storage, failure to use the proper grade and amount of engine oil, failure to keep the deck clear of flammable debris, or failure to maintain the equipment according to the instructions contained in the operator's manual.

Engine (fuel system) cleaning or repairs caused by fuel determined to be contaminated or oxidized (stale). In general, fuel should be used within 30 days of its purchase date.

Normal deterioration and wear of the exterior finishes, or product label replacement.

This warranty applies only while this product is within the United States. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears, Roebuck and Co., Hoffman Estates, IL 60179

The model number and serial numbers will be found on

MODEL NUMBER:

486.24707

a decal attached to the Yard Vac.

SERIAL NUMBER:

You should record both the serial number and the date of purchase and keep in a safe place for future reference.

2 Cal11-866-576-8388formissingpartsorassemblyhelp

DATE OF PURCHASE:

DO NOT RETURN TO STORE

Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times when using power equipment.

• Read and follow all instructions in this manual before attempting to assemble or operate this equipment. Failure

to comply with these instructions may result in personal injury. Keep this manual in a safe place for future reference

and for ordering replacement parts. Read this operating and service instruction manual carefully. Be thoroughly familiar with the controls and proper use of this power vacuum.

Read the vehicle owners manual and vehicle safe operation rules before using this equipment. Never allow children under 16 to operate this Vac System. Children 16 years and older should only operate under close parental supervision. DO NOT allow anyone to operate this equipment without

proper instructions. DO NOT allow passengers to ride on this equipment or the towing vehicle. Keep the area of operation clear of others, particularly

small children and pets. Check fuel before starting engine. Do not fill fuel tank indoors, while engine is running or while engine is hot. Wipe off any spilled fuel before starting engine. Engine and muffler get hot. Do not touch! To avoid fire

hazard, keep clean of debris and other accumulations. Never store Vac System with fuel in tank. Allow engine to coot before storing in any enclosure. Do not change engine governor settings. Do not operate engine if air cleaner or cover is removed

except for adjustment. Removal of these parts could create a fire hazard.

Keep hands, feet, face, long hair and clothing out of inlet and discharge area. There are ROTATING BLADES inside these openings. Before cleaning, repairing or inspecting, make certain

all moving parts come to a complete stop. Disconnect spark plug wire and keep wire away from plug to prevent accidental starting. Keep throttle control lever in stop position. If the Vac System should become blocked with debris

at any point, shut engine off and wait until the impeller comes to a complete stop before attempting to remove the obstruction. Disconnect spark plug wire to prevent accidental starting.

If the cutting mechanism strikes a foreign object, or if your

Yard Vac should start to vibrate abnormally, stop the engine

immediately, disconnect spark plug wire and move the wire

away from the spark plug. Allow the machine to stop and take the following steps.

a. Inspect for damage. b. Repair or replace any damaged parts. c. Check for loose parts and tighten to assure

continued safe operation.

Check all bolts for tightness at frequent intervals to help

insure safe operation. Check top cover frequently for wear. Replace if worn or damaged.

Never operate Yard Vac unless deck adapter, hose, hose adapter (nozzle), discharge chute (elbow), and top cover are properly attached in their place.

Do not remove top cover or attempt to empty contents of cart while engine is running.

Never attempt to change hose adapter (nozzle) or to install

remote hose attachment when engine is running.

Keep all shields and guards (e.g. discharge chute (elbow) and hose adapter (nozzle) in place and securely attached. Always wear safety glasses or other suitable eye protection when operating or maintaining this equipment.

Do not stand behind cart in exhaust discharge area while engine is running.

Do not operate this equipment while intoxicated or while taking drugs or medication that impairs the senses or

reactions. When using this equipment, start the vehicle transmission

in first (low) gear and then gradually increase speed only as conditions permit. Operate this equipment at reduced speed on rough terrain, along creeks and ditches and on slopes to prevent tipping

or loss of control. Do not drive too close to a creek or ditch. Vehicle braking and stability are affected by the addition of

this equipment. Do not fill the Yard Vac to its full capacity without checking the capability of the towing vehicle to safely pull and stop with Yard Vac attached.

Before operating on any grade (hill) refer to the safety rules

in the vehicle owner's manual concerning safe operation on slopes. Also refer to the SLOPE GUIDE on page 27 of this owner's manual. Do not operate on slopes in excess of 10 degrees. STAY OFF STEEP SLOPES!

Follow the maintenance instructions outlined in this manual.

Look for this symbol to point out important safety precautions. It means -- Attention!! Become alert!! Your

safety is involved.

DANGER: This Vac System was built to be operated according to the rules for safe operation in this manual. As with any type of power equipment, carelessness or error on the part of the operator can

result in serious injury'. This unit is capable of amputating fingers and hands and throwing objects. Failure to observe the safety instructions could result in serious injury or death.

Call 1-866-576-8388 for missing parts or assembly help 3 DO NOT RETURN TO STORE

TO AVOID SERIOUS iNJURY

= Read Owner's Manual and all safety labels on machine before starting and using machine. o Do Not remove top cover or attempt to empty contents of cart while engine is running.

Do Not stand behind cart in exhaust discharge area while engine is running. Keep hands, feet, face, long hair and clothing out of chipper inlet, vac inlet, and discharge

area. There are ROTATING BLADES inside these openings. Wear approved safety glasses and gloves. Avoid loose fitting clothes.

Keep the area of operation clear of all persons, particularly small children and pets. Keep all shields and guards (e.g. upper chipper chute extension, discharge chute, nozzle

assembly) in place and securely attached. Check discharge boot frequently for wear. Replace if worn or damaged.

If unit becomes clogged or jammed, shut off engine right away. Do Not attempt to clear

clog or jam with engine running.

Muffler and engine get hot and can cause burns. Do Not Touch. To avoid a fire hazard, keep leaves, grass and other combustible debris off hot muffler and engine.

Do Not attempt to remove or attach vac nozzle or optional Hose Kit with engine running. Do Not operate unit unless nozzle or optional Hose Kit is secured in place.

Do Not fill gas tank while engine is running. Allow engine to coot at least 2 minutes before refueling.

WARNING

I_ | HAZARDOUS ROTATING BLADES INSIDE. KEEP HANDS AWAY FROM ALL

OPENINGS. DO NOT REMOVE OR ATTACH HOSE, HOSE ADAPTER, ELBOW OR OPTIONAL HOSE KITWHEN ENGINE IS RUNNING!

WA I

This unit is equipped with an internal combustion engine and should not be used on or near unimproved forest-covered, or grass-covered land unless the engine's exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark attester is used, it should be maintained in effective working order by the operator.

In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark attester muffler is available at your nearest engine authorized service center.

4 Call 1-866-576-8388 for missing parts or assembly help

DO NOT RETURN TO STORE

These accessories were available when the unit was purchased. They are also available at most Sears retail outlets and service centers. Most Sears stores can order repair parts for you when you provide the model numbers of your tractor and Yard Vac System.

\ /t

The Hand Wand Attachment, Model 486.24509 provides a 12' x 5" diameter hose to clean around shrubs, patios, window wells and other

areas not accessible to the tractor.

Call 1-866-576-8388 for missing parts or assembly help 5 DO NOT RETURN TO STORE

jE jH

............_ Q

REF.

D E F

I J K L

QTY.

1 5

1 4 4

\\\\

DESCRiPTiON

Hex Bolt, 5/16-18 x 4" Hex Bolt, 3/8-16 x 3"

Hex Bolt, 1/2-13 x 1-1/2" Hex Bolt, 1/4-20 x 1-1/4" Hex Bolt, 3/8-16 x 1" Hex Bolt, 1/4-20 x 3/4"

Bolt, 5/16-18 x 3/4" Self-Tapping Truss Head Bolt, 5/16-18 x 3/4" Lock Nut, 1/4-20

Flanged Nut, 1/4-20 Nylock Nut, 1/4-20 Nylock Nut, 5/16-18

(©

RER

R S

T U

X Y

NOT SHOWN FULL SIZE

QTY. DESCRiPTiON

9 Nylock Nut, 3/8-16 1 Nylock Nut, 1/2-13

4 Nylon Washer

6 Washer, 1/4"

4 Washer, 5/8"

1 Washer, 7/16"

2 Cotter Pin

1 Hair Cotter Pin 3 Wing Nut, 5/16-18

1 Spring 1 Hitch Pin

2 Axle Clip 2 Plug

6 Call 1-866-576-8388 for missing parts or assembly help

DO NOT RETURN TO STORE

NOT SHOWN FULL SIZE

REF. QTY. DESCRiPTiON REF. QTY. DESCRiPTiON

A 2 Hex Bolt, 1/4-20 x 1-1/4" H 12 Washer, 5/16" Standard

B 2 Hex Bolt, 5/16-18 x 1-1/4" I 5 Nylon Washer

C 4 Hex Bolt, 1/4-20 x 3/4" J 2 Tarp Strap

D 2 Carriage Bolt, 5/16-18 x 3/4" K 1 Angle Bracket E 6 Washer, 1/4" Standard L 2 "S" Hook F 3 Nylock Nut, 5/16-18 M 1 Mounting Strap

G 5 Nylock Nut, 1/4-20 N 1 Mounting Bracket

Call 1-866-576-8388 for missing parts or assembly help 7 DO NOT RETURN TO STORE

REF.

1 2 3 4 5 6

7 8 9

10 11 12 13 14

QTY. DESCRIPTION

1 Cart Tray 1 Cover

1 Engine 1 Hose Adapter 1 Rope 1 Front Tongue

1 Rear Tongue 1 Elbow w/Deflector

2 Hose Clamp 2 Wheel

1 Wheel Support 1 Hose

1 Hitch Plate

2 Brace

,15

REF.

15 16 17 18 19

2O 21

22 23 24 25

26 27 28

QTY.

]

] ] ] ]

]

] ] ]

DESCRIPTION

Latch Stand Bracket Lower Support Rod

Tarp Strap (25")

Hose Hanger Rod Latch Stand Plate

Top Support Angle

Deck Adapter Cart Bed Brace

Axle

Front Support Tube Latch Lock Lever

Hitch Bracket Front Support Rod

Adapter Bracket

8 Call 1-866-576-8388 for missing parts or assembly help

DO NOT RETURN TO STORE

This unit is shipped WITHOUT GASOLINE or OiL. After assembly, see separate engine manual for proper fuel

and engine oil recommendations.

TOOLS REQUIRED FOR ASSEMBLY (1) Screwdriver (!) Pliers

(2) 7/1 6" Wrenches (2) 1/2" Wrench (2) 9/1 6" Wrenches (2) 3/4" Wrenches (only if figure 12 on page 12 is used)

REMOVAL OF PARTS FROM CARTONS

• Remove the hardware packs and all loose parts from the cartons.

Lay out and identify parts shown in carton contents. Lay out and identify parts in the hardware packs. Keep contents of each hardware package separate.

CART ASSEMBLY

Attach the hitch bracket to the front tongue using two 3/8" x 1" bolts and 3/8" nylock nuts. See figure 2.

Assemble the front tongue on top of the rear tongue

using three 3/8" x 3" hex bolts and 3/8" nylock nuts.

See figure 2.

Install the hitch pin and the hair cotter pin in the hitch

bracket and front tongue. See figure 2.

3/8" × 3"

HEX BOLT

HITCH PiN

318"× 1" X HEX BOLT

Assemble latch lock lever to rear tongue using 5/16" x 4" hex bolt and 5/16" nylock nut. Tighten nut until

snug against side of rear tongue. See figure 1A.

Attach the spring to the hole in the latch lock lever and the hole in the tongue. See figure 1B.

LATCH LOCK

LEVER

5/16" NYLOCK NUT

/" WELDED PLATE

5/16" x 4"

HEX BOLT

3/8" NYLOCK NUT _ @ @

HAiR .,......._%

COTTER PiN

FIGURE 2

Assemble the rear tongue to the wheel support by sliding the axle through the holes in the tongue and wheel support as shown in figure 3.

_ HOLE FOR AXLE

FIGURE 1

Call 1-866-576-8388 for missing parts or assembly help DO NOT RETURN TO STORE

FIGURE 3

+ 19 hidden pages