![](/html/ce/ce38/ce389dc6a10c15aff4fa88abf79289f42d339702cb7f2b17a8b24f7c16140cc6/bg1.png)
Owner's Manual
CR FrSMgH°
25 GALLO
Model No. 486.245333
AY
DO NOT RETURN TO STORE
For Missing Parts or Assembly
Questions Call 1-866-576-8388
o
o
CAUTION:
Before using this product, read
this manual and follow all Safety
Rules and Operating Instructions.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
www.sears.com/craftsman
PRINTED IN U.S.A. FORM NO. 41287 (01/28/10)
o
o
o
Safety
Assembly
Operation
Maintenance
Parts
![](/html/ce/ce38/ce389dc6a10c15aff4fa88abf79289f42d339702cb7f2b17a8b24f7c16140cc6/bg2.png)
WARRANTY .................................................................... 2
SAFETY ........................................................................... 2
HARDWARE PACKAGE CONTENTS ............................. 3
ASSEMBLY ...................................................................... 4
OPERATION .................................................................... 8
APPLICATION RATE TABLE ......................................... 10
MAINTENANCE ............................................................ 11
STORAGE ..................................................................... 11
TROUBLESHOOTING ................................................... 12
REPAI R PARTS ILLUSTRATION ................................... 14
REPAIR PARTS LIST ..................................................... 15
PARTS ORDERING/SERVICE ...................... BACK PAGE
ONE YEAR FULL WARRANTY
When operated and maintained according to the instructions supplied with it, if this Sprayer fails due to a defect in
material or workmanship within one year from the date of purchase, call 1-800-4-MY-HOME® to arrange for free repair (or
replacement if repair proves impossible).
If this product is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
The model number and serial numbers will be found on a
decal attached to the tank.
You should record both the serial number and the date of
purchase and keep in a safe place for future reference.
Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the
equipment. Exercise caution at all times when using power equipment.
• Read this owners manual carefully before attempting
to assemble or operate this sprayer.
Read your vehicle owners manual for operating and
safety rules before using this equipment.
Never allow children to operate this sprayer, and
do not allow adults to operate without proper
instructions.
Do not allow anyone to ride on or sit on this sprayer
Do not allow passengers on the towing vehicle.
Keep the area of operation clear of all persons,
particularly small children. Also keep area clear of
pets.
Read the chemical label carefully for instructions and
caution notes on handling and mixing of chemicals.
MODEL NUMBER:
SERIAL NUMBER:
DATE OF PURCHASE:
Wear eye and hand protection and wear protective
clothing when handling and applying lawn chemicals.
Do not spray on windy days.
Attachment of this sprayer may affect your tractor's
braking and stability. Be aware of your tractor's
capabilities. Refer to the safety rules in the vehicle
owner's manual concerning safe operation on slopes
Be aware of changing conditions on slopes. STAY
OFF OF STEEP SLOPES.
Operate at reduced speed on rough terrain, along
ditches and on hillsides to prevent loss of control.
Follow maintenance and lubrication instructions as
outlined in this manual.
486.245333
Look for this symbol to point out important safety precautions. It means -- Attention!!
Become alert!! Your safety is involved.
![](/html/ce/ce38/ce389dc6a10c15aff4fa88abf79289f42d339702cb7f2b17a8b24f7c16140cc6/bg3.png)
SHOWN FULL SiZE
S
jA
B C
.K
J
©
NOT SHOWN FULL SIZE
f
_H
fM
REF
A
B
C
D
E
F
G
H
I
J
K
QTY
8
2
2
2
4
10
2
4
2
2
1
N jO _i_ _P
S T U
DESCRIPTION REF QTY
Hex Bolt, 5/16" x 2" L 1
He× Bolt, 5/16" x 1-1/4" M 2
Carriage Bolt, 5/16" x 1-1/4" N 2
Screw, #10 x 3/8" O 1
Nut, 5/16" (SEMS) P 1
Nut, Nylock 5/16" Q 2
Flat Washer, 5/16" R 2
Flat Washer, 3/4" S 1
Lock Washer, #10 T 2
Washer, 5/16" Tooth Lock U 2
Hitch Pin
Hair Cotter Pin
Cotter Pin
Knob
Spray Gun Clip, Small
Spray Gun Clip, Large
Spacer, .8 x 1 x .25"
Spacer, .8 x 1 x 3.13"
Coiled Hose Clamp
Gasket, 3/4" Garden Hose
Axle Clamp, 3/4"
DESCRIPTION
![](/html/ce/ce38/ce389dc6a10c15aff4fa88abf79289f42d339702cb7f2b17a8b24f7c16140cc6/bg4.png)
CARTON CONTENTS
1. Lid 6.
2. Tank 7.
3. Return/Bypass Hose (may be assembled to tank) 8.
4. Boom Assembly 9.
5. Boom Mount Bracket 10.
fl
Spray Gun Assembly
Axle
Hitch Arms (2)
Hitch Brackets (2)
Wheels (2)
6
/
/
7
J
/
2 _--
TOOLS REQUIRED FOR ASSEMBLY
(2) 1/2" Wrenches
(1) Screwdriver
(1) Pliers
(1) Hammer
STEP 1: (SEE FIGURE 1)
* Remove all items from carton and lay out as shown
on pages 3 and 4.
* Assemble the axle clamps (U) and four 5/16" hex nuts
(SEMS) (E) to the factory installed bolts in the frame
tubes. Do not tighten yet.
10
FACTORY
INSTALLED
FIGURE 1
5/16" SEMS NUT (E)
![](/html/ce/ce38/ce389dc6a10c15aff4fa88abf79289f42d339702cb7f2b17a8b24f7c16140cc6/bg5.png)
STEP 2: (SEE FIGURE 2 AND 1)
• Slide the axle through the two axle brackets.
• Assemble a spacer (R), a spacer (Q), a 3/4" washer
(H), a wheel (valve stem facing out) and another 3/4"
washer (H) onto the axle. Assemble a cotter pin (M)
through the end of the axle. Repeat on other end.
• Tighten the four nuts which fasten the axle clamps to
the frame tubes. Refer back to figure 1.
1/8" x 1-1/2"
COTTER PIN (M)
SPACER(R)
STEP 4: (SEE FIGURE 4)
• Fasten the ends of the hitch arms together using two
5/16" x 1-1/4" hex bolts (B) and 5/16" nylock nuts (F).
Do not tighten yet.
• Assemble the hitch brackets to the hitch arms using
two 5/16" x 2" hex bolts (A) and 5/16" nylock nuts
(F). Position each bolt behind a cross bolt in the hitch
arms. Do not tighten yet.
• Tighten all nuts assembled in steps 3 and 4 at this
time.
5116" x 2"
REX BOLT (A)
5116"NYLOCK
NUT (F)
!
SPACER (Q)
3/4" WASHER (H)
FIGURE 2
STEP 3: (SEE FIGURE 3)
• Assemble a hitch arm to the inside of a frame tube
underneath the tank. Use two 5/16" x 2" hex bolts
(A) and 5/16" nylock nuts (F). Do not tighten yet.
Repeat for other side.
FIGURE 4
STEP 5: (SEE FIGURE 5)
• Assemble the boom mount bracket to the rear of the
frame tubes using two 5/16" x 2" hex bolts (A) and
5/16" nylock nuts (F).
FIGURE 3
5116" x 2"
REX BOLT(A)
NYLOCK
NUT (F)
\
HITCHARM
FIGURE 5
f
J 5/16" NYLOCK NUT (F)
5116" x 2"
HEX BOLT (A)
REAR ViEW