Craftsman 486245312 Owner’s Manual
Owner's Manuat
15 PSI
Model No, 48&245312
®
CAUTION:
Before using this product, read
this manuaU and follow aHSafety
RuUes and Operating Instructions.
,, Safety
• Assembly
• Operation
,, Maintenance
• Parts
mMPORTANT: For Missing Parts or
AssembUy Questions Call 1-866-576-8388
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
www=sears=com/craftsman
PRINTED IN U.S.A. FORM NO. 49729 (12/05)
STORAGE ....................................................................... 8
SPRAYING CHARTS ....................................................... 9
REPAIR PARTS ILLUSTRATION .................................. 10
REPAIR PARTS LIST .................................................... 11
PARTS ORDERING/SERVICE ......................... Back Page
ONE YEAR FULL WARRANTY
When operated and maintained according to the instructions supplied with it, if this Sprayer fails due to a defect in
material or workmanship within one year from the date of purchase, call 1-800-4=MY=HOME® to arrange for free repair (or
replacement if repair proves impossible).
if this product is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., D817WA, Hoffman Estates, IL 60179
The model number and serial numbers will be found on
a decal attached to the sprayer.
You should record both the serial number and the date of
purchase and keep in a safe place for future reference.
Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment.
Exercise caution at all times when using power equipment.
Read this owners manual carefully before attempting
to assemble or operate this sprayer.
Read your vehicle owners manual for operating and
safety rules before using this equipment.
Never allow children to operate this sprayer, and do
not al!ow adults to operate without proper instructions.
Do not allow anyone to ride on or sit on this sprayer.
Do not allow passengers on the towing vehicle.
Keep the area of operation clear of all persons,
particularly small children. Also keep area clear of
pets.
Read the chemical labet carefully for instructions and
caution notes on handling and mixing of chemicals.
MODEL NUMBER:
SERIAL NUMBER:
DATE OF PURCHASE:
Wear eye and hand protection and wear protective
clothing when handling and applying lawn chemicals.
Do not spray on windy days.
Attachment of this sprayer may affect your tractor's
braking and stability. Be aware of your tractor's
capabilities. Refer to the safety rules in the vehicle
owner's manual concerning safe operation on slopes.
Be aware of changing conditions on slopes. STAY
OFF OF STEEP SLOPES.
Operate at reduced speed on rough terrain, along
ditches and on hillsides to prevent loss of control
Follow maintenance and lubrication instructions as
outlined in this manual.
486.245312
Look for this symbol to point out important safety precautions. It means-- Attention !! Become
alert!! You_ safety is involved.
2
SHOWN FULL SIZE
F......
jA
....... _\ _ F
/ \
\,, /
/
,jJ
jh i
\J
zH
NOT SHOWN FULL SIZE
M
/
fN
KEY
A
B
C
D
E
F
G
H
I
J
K
L
QTY.
8
2
2
2
10
2
4
2
2
1
1
2
DESCRIPTION
Hex Bolt, 5/16" x 2"
Hex Bolt, 5/16" x 1-1/4"
Carriage Bolt, 5/16" x 1:1/4"
Screw, #10 x 1/2"
Nylock Nut, 5/16"
Flat Washer, 5/16"
Flat Washer, 1/2"
Lock Washer, #10
Washer, 5/16" Tooth Lock
Hitch Pin
Hair Cotter Pin
Palnut
i KEY
M
N
O
P
Q
R
S
T
U
V
W
X
V .W
QTY.
2
1
1
2
1
2
1
1
1
1
1
1
Knob
Spray Gun Clip, Small
Spray Gun Clip, Large
Spacer
Coiled Hose Clamp
Hose Clamp, 3/8"
Gasket, 3/4" Garden Hose
Drain Body
Nylon Cap
O-Ring
Nylon Washer, 11/16"
Nylon Nut
DESCRIPTION
CARTON CONTENTS
1. Boom Mount Bracket
2. Lid
3. Tank with Frame Tubes
4. Spray Gun Assembly
5. Boom Assembly
6. Hitch Arms (2)
REMOVAL OF PARTS FROM CARTON
, Remove all parts and hardware packages from the
carton, Lay out a!Jparts and hardware and identify
using the illustrations on pages 3 and 4.
TOOLS REQURED FOR ASSEMBLY
(2) 1/2" Wrenches
(1) Screwdriver
(1) Pliers
(1) Hammer
7, Hitch Brackets (2)
8. Axle
9. Wheels (2)
8
Assemble the axle through the large holes in the
frame tubes. Jfthe axle will not fit, slightly loosen the
bolts in the frame tubes to align the holes. Retighten
the bolts after assembling axle. See figure 1.
Assemble a spacer, a 1/2" flat washer, a wheel and
another 1/2" fiat washer onto the axle. Lightly tap a
palnut onto the end of the axle. Repeat on other end
of axle. See figure 1.
1/2" FLAT _
WASHER I
I 1
I
\
SPACER
AXLE
PALNUT
Assemble a hitch arm to the inside of a frame tube
underneath the tank. Use two 5/16" x 2" hex bolts and
5/16" nylock nuts as shown in figure 2. Do not tighten
yet. Repeat for other side.
HEX BOLT HITCH ARM
FIGURE 1
FIGURE 2
4
Loading...