Craftsman 48624531 Owner’s Manual

Owner's Manual

CRAFTSMAN+

15 GALLON 35 PSI SPRAYER

Model No. 486.24531

CAUTION:

Before using this product,

read this manual and follow

all Safety Rules and
Operating Instructions.

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

PRINTED IN U.S.A.

• Safety

• Assembly

• Operation

• Maintenance

• Parts

SAFETY RULES ....................................................... 2

FULL SIZE HARDWARE CHART ............................ 3

CARTON CONTENTS .............................................. 4

ASSEMBLY ............................................................... 4

OPERATION ............................................................. 7

MAINTENANCE ........................................................ 8

STORAGE ................................................................. 8

SPRAYING CHARTS ................................................ 9

REPAIR PARTS ILLUSTRATION ......................... 10

REPAIR PARTS LIST ............................................. 11

PARTS ORDERING/SERVICE ................. Back Page

LIMITED ONEYEAR WARRANTY ON

For one year from the date of purchase, when thissprayer is maintained and lubricated according to the operating and
maintenance instructionsin the owner's manual, Sears will repair any defect in material or workmanship free of charge.

Ifthis sprayer is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase.

This warranty does not cover repairs necessary because of operator negligence or abuse, including the failure tomaintain
the equipment according to instructions contained in the owner's manual.

WARRANTY SERVICE IS AVAILABLE BY CONTACTING THE NEAREST SEARS SERVICE CENTER/DEPARTMENT

IN THE UNITED STATES.

This warranty applies only while this product is in the United States.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears, Roebuck and Co. D/817 WA. Hoffman Estates, Chicago, IL 60179

The model number and serial numbers will be found on a
decal attached to the sprayer.

You should record both the serial number and the date of

purchase and keep in a safe place for future reference.

Any power equipment can cause injury if operated improperly or if the user does not understand how to operate
the equipment. Exercise caution at all times, when using power equipment.

• Read this owners manual carefully before attempting
to assemble or operate this sprayer.

• Read your vehicle owners manual for operating and
safety rules before using this equipment.

• Never allow children to operate this sprayer, and do
not allow adults to operate without proper instructions.

• Do not allow anyone to ride on or sit on this sprayer.

• Do not allow passengers on the towing vehicle.

• Keep the area of operation clear of all persons,
particularly small children. Also keep area clear of
pets.

• Read the chemical label carefully for instructions and
caution notes on handling and mixing of chemicals.

MODEL NUMBER:
SERIAL NUMBER:
DATE OF PURCHASE:

• Wear eye and hand protection and wear protective
clothing when handling and applying lawn chemicals.

• Do not spray on windy days.

• Attachment of this sprayer may affect your tractor's
braking and stability. Be aware of your tractor's

capabilities. Refer to the safety rules in the vehicle
owner's manual concerning safe operation onslopes.

Be aware of changing conditions on slopes. STAY

OFF OF STEEP SLOPES.

• Operate at reduced speed on rough terrain, along
ditches and on hillsides to prevent loss of control.

• Follow maintenance and lubrication instructions as
outlined in this manual.

486.24531

I _, Look for this symbol to point out important safety precautions. It mean--AttentlonHBecome alertH Your safety is involved.

SHOWN FULL SIZE

KEY

A

B

C

D
E
F

G

H

J
K

L

M

N

O

NOT SHOWN FULL SIZE

QTY.

2

2
4

2
2
4
2
6

I

4
2

16

2
4
4
2

DESCRIPTION

Bolt, Hex 5/16" x 3"
Bolt, Hex 5/16" x 2-1/4"

Bolt, Hex 5/16" x 1-1/2"

Bolt, Carriage 5/16"x 1-3/4"
Bolt, Carriage 5/16" x 1-1/4"

Bolt, Curved Head, 5/16" x 1-5/8"
Screw, #10 x 1/2"
Hex Nut, 5/16"
Hex Lock Nut, 5/16"
Lock Washer, #10
Lock Washer 5/16"
Flat Washer, 5/16"

Flat Washer, 1/2"

Washer, Bowed

Washer, 5/16" Tooth Lock

KEY QTY. DESCRIPTION

P

Q
R

S

T

U

V

W

X
Y

Z

AA
BB

CC

DD
EE

1

1
2
2

1

1
2
2

1
2

1

1

1

1

1

1

Hair Cotter Pin
Hitch Pin

Hub Cap

Knob
Spray Gun Clip, Small

Spray Gun Clip, Large
Spacer

Axle Clamp

Hose Clamp, 1/4"
Hose Clamp, 3/8"
Gasket, 3/4" Garden Hose
Drain Body

Nylon Cap
O-Ring
Nylon Washer. 11/16"
Nylon Nut

CARTON CONTENTS

1. Lid

2. Tank

3. Wheels (2)

4. Axle

5. Hitch Tube, L.H.

6. Hitch Tube, R.H.

REMOVAL OF PARTS FROM CARTON

• Remove all parts and hardware packages from the
carton. Lay out all parts and hardware and identify
using the illustrations on pages 3 and 4.

TOOLS REQUIRED FOR ASSEMBLY
(2) 1/2" Wrenches

(1) Screwdriver
(1) Pliers
(1) Hammer

7. Hitch Brackets (2)

8. Boom Mount Bracket

9. Spray Gun Assembly

10. Boom Assembly

• Assemble the hitch tubes to the tank using four 5/16"
x 1-1/2" hex bolts, 5/16" lock washers and bowed

washers. Place the bowed washers between the tank

and the hitch tubes. Do not Ughten yet. See figure 2.

• Fasten the hitch tubes together at the front using two

5/16" x 3" hex bolts, four 5/16" lock washers and two
5/16" hex lock nuts. Do not tighten yet. See figure 2.

• Assemble the axle clamps to the hitch tubes using

four curved head bolts, 5/16" lock washers and 5/16"
hex nuts. Do not tighten yet. See figure 1.

5/16" x 1-5/6"
CURVED HEAD BOLT

HITCH TUBE (LH)

AXLE WASHER
CLAMP HITCH TUBE (RH)

r16" LOCK \

5/16" HEX NUT

FIGURE 1

16"HEX

LOCK NUT

FIGURE 2