Craftsman 3-Shelf Storage Module - Black, 3-Shelf Storage Module - Red Owner's Manual

OPERATOR’S MANUAL

Shelf accessory

Please indicate the following information from the service part drawing provided.

Model Number: ____________________________

Model Description: _________________________

*Product you purchased may vary from picture shown.

Caution: Read and follow all Safety Rules and Operating Instructions before first use of this product. Retain this document for future reference.

Distributed by Sears Brands Management Corporation., Hoffman Estates, IL 60179

Rev A F1727

SAFETY

SAFETY WARNINGS AND CAUTIONS:

• Use appropriate safety equipment when using power and hand tools. Failure to do so may cause personal injury or product damage.

• Use adequate manpower when assembling and moving this unit. Failure to do so may cause personal injury or product damage.

• DO NOT stand on this product. You may fall which m ay cause personal injury.

• DO NOT mount this product on a truck bed or any other moving object. This may cause personal injury or product damage.

• Appropriately secure this product before moving it with a forklift.

• DO NOT alter this product in any m anner. For example, do not weld external lockbars or attach electrical equipm ent. This may cause product dam age or personal injury.

• Keep the product on level surfaces. The product may become unstable and tip if stored or moved on an un-level surface, which may cause personal injury or product damage.

• Maximum weight for each shelf should be no more than 35 pounds.

Tools Required:

Socket wrench 7/16" socket 11/32" wrench Screwdriver, crosstip Screwdriver, flathead Square

Hardware Included

AA(10)

BB(10)

EE(2)

CC(10)

DD(12)

Call 1-800-4MY-HOME (1-800-469-4663) for Service Parts.

Refer to Service Parts Drawing for full listing of Service Parts.

ASSEMBLY

STEP (1):

EE (2)

• Ensure that the leveling screws on the existing work bench are extended to at least 1.5 inch, (38 mm). (See leveling foot adjustment.)

1.5" (38 mm)

STEP (2):

AA(10)

BB(10)

CC(10)

Note: Shelf kit may be installed on left or right side. Installation shown on right side.

• Install (A) using (6) (AA), (6) (BB), (6) (CC).

• Attach (B), as shown, using (4) (AA), (4) (BB), and (4) CC.

• Finger tighten.

• Adjust bench to desired height. (See leveling foot adjustment.)

Workbench Top removed for clarity

• Assemble (2) (EE) in (A). Make sure both (EE) are fully retracted in A.

+ 5 hidden pages