Craftsman 320.38595 User Manual

Operator's ManuaJ

C3 1/2" BRUSHLESS

DRILL/DRIVER

Model No. 320.38595

* WARRANTY * SAFETY

* DESCRiPTiON

_WARNiNG: To reduce the risk of injury, the user must read and understand the

Operator's Manual before using this product.

Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.

www,craftsman,com

* ASSEMBLY * OPERATION

* MAINTENANCE

Warranty Page 2

Safety Symbols Pages 4-5 Safety Instructions Pages 6-9 Description Pages 10-11

Assembly Page 12

Operation Pages 13-20 Maintenance Pages 21-22

Troubleshooting Page 23

Parts List Pages 24-25

CRAFTSMAN ONE YEAR LiMiTED WARRANTY FOR ONE YEAR from the date of purchase, this product is warranted

against any defects in material or workmanship. With proof of purchase, defective product will be replaced free of charge.

For warranty coverage details to obtain free replacement, visit the web page: www.craftsman.com/warranty

This warranty does not cover the bit, which is an expendable part that can

wear out from normal use within the warranty period.

This ONE YEAR warranty is void if this product is ever used while providing

commercial services or if rented to another person. For 90 DAY commercial and rental use terms, see the Craftsman warranty web page.

This warranty gives you specific legal rights, and you may also have other

rights which vary from state to state. Sears Brands Management Corporation, Hoffman Estates, IL 60179.

SAVE THESE INSTRUCTIONS!

READ ALL INSTRUCTIONS!

This drill/driver has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability have been given top priority

in the design of this product making it easy to maintain and operate.

2 © Sears Brands, LLC

,_, DANGER: People with electronic devices, such as pacemakers, should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker.

_,WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the state of

California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

• Lead from lead-based paints Crystalline silica from bricks and cement and other masonry products, and

Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemical: work in a well ventilated

area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

Thepurposeofsafetysymbolsistoattractyourattentiontopossibledangers. Thesafetysymbolsandtheexplanationswiththemdeserveyourcareful

attentionandunderstanding.Thesymbolwarningsdonot,bythemselves, eliminateanydanger.Theinstructionsandwarningstheygivearenosubstitutes

forproperaccidentpreventionmeasures.

WARNING:Besuretoreadandunderstandallsafetyinstructionsinthis

manual,includingallsafetyalertsymbolssuchas"DANGER,""WARNING,"and

"CAUTION"beforeusingthistool.Failuretofollowallinstructionslistedinthis

manualmayresultinelectricshock,fireand/orseriouspersonalinjury.

SYMBOL SIGNAL MEANING

SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, or CAUTION; may

be used in conjunction with other symbols or pictographs.

,_ DANGER: Indicates a hazardous situation which, if not avoided, will result in death or serious injury.

,_, WARNING: Indicates a hazardous situation which, if not avoided, could

result in death or serious injury. _1_ CAUTION: Indicates a hazardous situation which, if not avoided, could

result in minor or moderate injury.

Damage prevention and Information Messages

These inform the user of important information and/or instructions that could

lead to equipment or other property damage if they are not followed. Each message is preceded by the word "NOTICE", as in the example below:

NOTICE" Equipment and/or property damage may result if these instructions are not followed.

_WARNING: To ensure safety and reliability, all repairs should be performed

by a qualified service technician.

,_ WARNING: The operation of any power tools can result in

foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation,

always wear safety goggles or safety glasses with side shield and a full face shield when needed. We recommend a Wide

Vision Safety Mask for use over eyeglasses or standard safety

glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1.

SAVE THESE iNSTRUCTiONS

Some of these following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to

operate the tool better and more safely.

SYMBOL NAME DESIGNATION/EXPLANATION

V Volts Voltage

A Amperes Current

Hz Hertz Frequency (cycles per second)

W Watt Power

min Minutes Time

Alternating Current Type of current

Direct Current Type or a characteristic of current

n O No Load Speed Rotational speed, at no load

[] Class II Construction Double=insulated construction

.../min Per Minute Revolutions, strokes, surface speed,

Wet Conditions Alert Do not expose to rain or use in damp

Read The Operator's Manual read and understand operator's manual

O Always wear safety goggles or safety

_IL Alert Precautions that involve

Eye Protection glasses with side shields and a fulI face

Safety

No=Hands Symbol Failure to keep your hands away from theblade will result in serious personal injury.

No=Hands Failure to keep your hands away from the

No=Hands Symbol Failure to keep your hands away from the

Symbol

orbits, etc., per minute

locations.

To reduce the risk of injury, user must

before using this product.

shield when operating this product.

safety.

your

blade will result in serious personal injury.

Hot Surface To reduce the risk of injury or damage,avoid contact with any hot surface.

GENERAL POWER TOOL SAFETY WARNINGS

,_ WARNING: Read aii safety warnings and instructions. Failure to follow

the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded)

power tool or battery-operated (cordless) power tool.

WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.

• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

Power tool plugs must match the outlet. Never modify the plug in any

way. Do not use any adaptor plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of

electric shock.

Avoid body contact with earthed or grounded surfaces such as pipes,

radiators, ranges and refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp

edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of

electric shock. if operating a power tool in a damp location is unavoidable, use a

ground fault circuit interrupter (GFCl) protected supply. Use of a GFCI reduces the risk of electric shock.

PERSONAL SAFETY

* Stay alert, watch what you are doing and use common sense when

operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while

operating power tools may result in serious personal injury.

* Use personal protective equipment. Always wear eye protection.

Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce

personal injuries.

* Prevent unintentional starting. Ensure the switch is in the off-position

before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or

energizing in power tools that have the switch on invites accidents.

* Remove any adjusting key or wrench before turning the power tool

on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

* Do not overreach. Keep proper footing and balance at all times. This

enables better control of the power tool in unexpected situations.

* Dress properly. Do not wear loose clothing or jewelry. Keep your hair,

clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

* If devices are provided for the connection of dust extraction and

collection facilities, ensure these are connected and properly used. Use

of these devices can reduce dust-related hazards.

POWER TOOL USE AND CARE

* Do not force the power tool. Use the correct power tool for your

application. The correct power tool will do the job better and safer at the

rate for which it was designed.

* Do not use the power tool if the switch does not turn it on and off. Any

power tool that cannot be controlled with the switch is dangerous and must be repaired.

* Disconnect the plug from the power source and/or the battery pack

from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures

reduce the risk of starting the power tool accidentally.

* Store idle power tools out of the reach of children and do not allow

persons unfamiliar with the power tool or these instructions to operate

the power tool. Power tools are dangerous in the hands of untrained users.

* Maintainpower tools. Check for misalignment or binding of moving

parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly maintained power tools.

* Keep cutting tools sharp and clean. Properly maintained cutting tools with

sharp cutting edges are less likely to bind and are easier to control.

* Use the power tool, accessories and tool bits etc., in accordance with

these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from

those intended could result in a hazardous situation.

BATTERY TOOL USE AND CARE

• Recharge only with the charger specified by the manufacturer. A

charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.

• Use power tools only with specifically designated battery packs. Use of

any other battery packs may create a risk of injury and fire.

• When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects

that can make a connection from one terminal to another. Shorting the

battery terminals together may cause burns or a fire.

• Under abusive conditions, liquid may be ejected from the battery;

avoid contact. If contact accidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

SERVICE

Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power

tool is maintained.

Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance instructions may create

a risk of shock or injury.

SPECiFiC SAFETY RULES FOR BRUSHLESS DRILL/DRIVER

,, Know your drill/driver. Read operator's manual carefully. Learn the

applications and limitations, as well as the specific potential hazards related to this tool. Following this rule will reduce the risk of electric shock, fire or

serious injury.

,, Hold power tool by insulated gripping surfaces, when performing an

operation where the cutting accessory may contact hidden wiring. Cutting accessory contacting a "live" wire may make exposed metal parts of

the power tool "live" and could give the operator an electric shock.

= Use auxiliary handle(s), if supplied with the tool. Loss of control can

cause personal injury.

• Always wait until the machine has come to a complete stop before placing it down. The tool insert can jam and lead to loss of control over the

power tool. Do not permit children to use the drill/driver; it is not a toy.

Remove the battery pack from the drill/driver before performing any routine maintenance or cleaning.

Do not disassemble the drill/driver.

Do not place the drill/driver or battery pack near fire or heat. They may explode.

Secure the workpiece. Clamping devices or a vise will hold the workpiece

in place better than the hand.

Always wait until the machine has come to a complete stop before

placing it down. The tool insert can jam and lead to loss of control over the power tool.

= Before performing any kind of work on the tool (e. g. maintenance,

bit change, etc.) or when transporting and storing it, always set the

direction-of-rotation selector to center off position. Unintentional activation of the on/off switch may result in personal injury.

• Use protective gloves when removing the bit from the tool, or allow the clamp to cool down. The bit may be hot after prolonged use.

• Do not dispose of a worn out battery pack by incinerating. Do not incinerate the battery, even if it is severely damaged or completely worn out.

The battery may explode in fire.

• Do not operate the drill/driver or the charger near flammable liquids or in a gaseous or explosive environment. Internal sparks may ignite fumes.

• To reduce the risk of electric shock, do not put the drill/driver, battery, or charger in water or other liquid. Do not place or store the product

where it can fall or be pulled into a tub or sink.

= Keep the drill/driver dry, clean and free from oil and grease. Always use

a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-

based products, or any strong solvent to clean the drill/driver.

= Save these instructions. Refer to them frequently and use them to instruct

others who may use this tool. If you loan someone this tool, also loan them these instructions.

+ 19 hidden pages