Craftsman 320.3761 User Manual

Operator's Manual

Craftsman Premium Router

Table Base Cabinet

Model No. 320.3761

• WARRANTY

• SAFETY

• DESCRiPTiON

_WARNING: To reduce the risk of injury,

the user must read and understand the

Operator's Manual before using this product.

Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.

www,ctaftsman,com

• UNPACKING

• ASSEMBLY

• MAINTENANCE

Warranty Page 2 Safety Symbols Pages 4-5

Safety Instructions Page 6 Description Page 7

Unpacking Pages 8-10

Assembly Pages 11-17

Maintenance Page 18 Part List Pages 18-19

CRAFTSMAN ONE YEAR LiMiTED WARRANTY FOR ONE YEAR from the date of purchase, this product is warranted

against any defects in material or workmanship. With proof of purchase, a defective product will be replaced free of charge.

For warranty coverage details to obtain free replacement, visit the web site: www.craftsman.com

This warranty is void if this product is ever used while providing commercial

services or if rented to another person.

This warranty gives you specific legal rights, and you may also have other

rights which vary from state to state. Sears Brands Management Corporation, Hoffman Estates, IL 60179

This cabinet has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability have been given top priority in the

design of this product making it easy to maintain and operate.

SAVE THESE iNSTRUCTiONS!

READ ALL iNSTRUCTiONS!

Page 2 3761 Manual_Revised_12 1220

_,WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the State of

California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

• Lead from lead-based paints, Crystalline silica from bricks and cement and other masonry products, and

Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemical: work in a well ventilated

area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

3761 ManuaLRevised_12 1220 Page 3

The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deserve your careful

attention and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes

for proper accident prevention measures. ,_ WARNING: Be sure to read and understand all safety instructions in this

Operator's Manual, including all safety alert symbols such as "DANGER,"

"WARNING," and "CAUTION" before using this tool. Failure to following

all instructions listed below may result in electric shock, fire, and/or serious

personal injury.

SYMBOL MEANING SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, or CAUTION. May

be used in conjunction with other symbols or pictographs. ,_ DANGER: Indicates an imminently hazardous situation, which, if not

avoided, will result in death or serious injury.

,_ WARNING: Indicates a potentially hazardous situation, which, if not avoided,

could result in death or serious injury.

,_ CAUTION: Indicates a potentially hazardous situation, which, if not avoided,

could result in minor or moderate injury.

Damage Prevention and Information Messages

These inform the user of important information and/or instructions that could

lead to equipment or other property damage if they are not followed. Each message is preceded by the word "NOTICE," as in the example below:

NOTICE: Equipment and/or property damage may result if these instructions are not followed.

,_, WARNING: To ensure safety and reliability, all repairs should be performed by a qualified service technician.

WARNING: The operation of any power tools can result in

foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation,

always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend a Wide

Vision Safety Mask for use over eyeglasses or standard safety

glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1.

Page 4 3761 Manual_Revised_12 1220

SAVE THESE iNSTRUCTiONS

Some of the following symbols may be used on this base cabinet. Please study them and learn their meaning. Proper interpretation of these symbols will allow

you to operate the base cabinet better and more safely.

SYMBOL NAME DESIG NATION/EXPLANATION

V Volts Voltage

A Amperes Current

Hz Hertz Frequency (cycles per second)

W Watt Power

min Minutes Time

"_ Alternating Current Type of current

==='== Direct Current Type or a characteristic of current

n o No Load Speed Rotational speed, at no load

] Class IIConstruction Double-insulated construction

.../min Per Minute Revolutions, strokes, surface speed,

Wet Conditions Alert Do not expose to rain or use in damplocations.

Read The Operator's Manual read and understand operator's manual

Eye Protection glasses with side shields and a full face

_, Alert Precautions that involve

Safety

No=Hands Symbol Failure to keep your hands away from theblade will result in serious personal injury.

No=Hands Failure to keep your hands away from the

No=Hands Symbol Failure to keep your hands away from the

Symbol

orbits, etc., per minute

To reduce the risk of injury, user must before using this product.

Always wear safety goggles or safety shield when operating this product.

safety.

your

blade will result in serious personal injury.

Hot Surface To reduce the risk of injury or damage,

3761 Manual_Revised_12 1220 Page 5

avoid contact with any hot surface.

GENERAL SAFETY RULES

WARNING: Read and understand all instructions. Failure to follow all

instructions in this Operator's Manual may result in electric shock, fire, and/or

serious personal injury. Save all warnings and instructions for future reference.

READ AND SAVE THESE INSTRUCTIONS

CAUTION: Do not modify or use this base cabinet for any application other

than that for which it was designed.

= Keep children away. Keep the work area clean and dry. = Do not load the base cabinet with more than 100 Ibs.

= Place the base cabinet on a flat surface before placing a router table or

other item on the base cabinet.

= Never stand or sit on the base cabinet or place the tools other than that

for which it was designed on the base cabinet.

= Unplug any power tool before moving. = Do not permit children to use the base cabinet unsupervised, it is not a toy.

= Be sure that all locking bolts and nuts are securely tightened before

using your base cabinet.

= When moving, always push on the base cabinet not the power tool or

other item on the base cabinet.

Page 6 3761 Manual_Revised_12 1220

+ 13 hidden pages