Craftsman 320.3760 User Manual

Operator's Manual

QUICK-LIFT GRAVITY STAND

Model No. 320.3760

_WARNING: To reduce the risk of injury,

the user must read and understand the

Operator's Manual before using this product.

_WARNING: To reduce the risk of injury,

the user must always read and follow

• WARRANTY

• SAFETY

• ASSEMBLY

• OPERATION

• MAINTENANCE

• ESPANOL

all instructions in the bench=top tool operator's manual before mounting the tool

to this stand.

Sears Brands Management Corporation, Hoffrnan Estates, IL 60179 U.S.A.

www, craftsman,com

Warranty Page 2

Safety Symbols Pages 4-5 Safety Instructions Pages 6-7 Description Pages 7-8

Assembly Pages 8-14

Operation Pages 15-17 Maintenance Pages 17-18 Parts List Pages 19-20

CRAFTSMAN ONE YEAR FULL WARRANTY

FOR ONE YEAR from the date of purchase, this product is warranted against any defects in material or workmanship. A defective product will be

replaced free of charge. For warranty coverage details to obtain free replacement, visit the web

site: www.craftsman.com

This warranty is void if this product is ever used while providing commercial

services or if rented to another person.

This warranty gives you specific legal rights, and you may also have other

rights which vary from state to state. Sears Brands Management Corporation, Hoffman Estates, IL 60179

This gravity stand has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability have been given top priority

in the design of this product, making it easy to maintain and operate.

SAVE THESE iNSTRUCTiONS!

READ ALL iNSTRUCTiONS!

Page 2 3760 Manual_Revised_12 1204

_, DANGER: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the State of

California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

• Lead from lead-based paints, Crystalline silica from bricks and cement and other masonry products, and

Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deserve your careful

attention and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes

for proper accident prevention measures.

3760 ManuaLRevised_12 1204 Page 3

,_ WARNING: Be sure to read and understand all safety instructions in this Operator's Manual, including all safety alert symbols such as "DANGER,"

"WARNING," and "CAUTION" before using this stand. Failure to following

all instructions listed below may result in electric shock, fire, and/or serious

personal injury.

SYMBOL SIGNAL MEANING SAFETY ALERT SYMBOL: indicates DANGER, WARNING, or CAUTION; may

be used in conjunction with other symbols or pictographs.

DANGER: Indicates a hazardous situation which, if not avoided, will result in

death or serious injury.

,_ WARNING: Indicates a hazardous situation which, if not avoided, could

result in death or serious injury.

,_ CAUTION: Indicates a hazardous situation which, if not avoided, could

result in minor or moderate injury.

Damage Prevention and Information Messages

These inform the user of important information and/or instructions that could

lead to equipment or other property damage if they are not followed. Each message is preceded by the word "NOTICE," as in the example below:

NOTICE: Equipment and/or property damage may result if these instructions are not followed.

WARNING: To ensure safety and reliability, all repairs should be performed

by a qualified service technician.

_IL WARNING: The operation of any power tools can result in

foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation,

always wear safety goggles or safety glasses with side shield and a full face shield when needed. We recommend a Wide

Vision Safety Mask for use over eyeglasses or standard safety

glasses with side shields. Always use eye protection that is marked to comply with ANSI Z87.1.

Page 4 3760 Manual_Revised_12 1204

SAVE THESE iNSTRUCTiONS

Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to

operate the tool better and more safely.

SYMBOL NAME DESIG NATION/EXPLANATION

V Volts Voltage

A Amperes Current

Hz Hertz Frequency (cycles per second)

W Watt Power

min Minutes Time

Alternating Current Type of current

==='== Direct Current Type or a characteristic of current

n o No=load Speed Rotational speed, at no load

] Class II Construction Double-insulated construction

.../min Per Minute Revolutions, strokes, surface speed,

Wet Conditions Alert Do not expose to rain or use in damp

Read The Operator's Manual read and understand operator's manual

G Always wear safety goggles or safety

_, Alert Precautions that involve

Eye Protection glasses with side shields and a full face

Safety your safety.

No=Hands Symbol Failure to keep your hands away from theblade will result in serious personal injury.

No=Hands Failure to keep your hands away from the

No=Hands Symbol Failure to keep your hands away from the

Symbol

orbits, etc., per minute

locations.

To reduce the risk of injury, user must before using this product.

shield when operating this product.

blade will result in serious personal injury.

Hot Surface To reduce the risk of injury or damage,avoid contact with any hot surface.

3760 Manual_Revised_12 1204 Page 5

GENERAL SAFETY RULES

WARNING: Read and understand all instructions. Failure to follow all

instructions in this OperatoCs Manual may result in electric shock, fire, and/or

serious personal injury.

Save all warnings and instructions for future reference.

READ AND SAVE THESE INSTRUCTIONS

,_ CAUTION: Do not modify or use this stand for any application other than

that for which it was designed.

• Know your accessory. Read the operator's manual carefully. Learn the product's applications and limitations, as well as the specific potential

hazards related to this product.

• Keep the work area clean. Cluttered work areas and work benches invite

accidents. Do not leave tools or pieces of wood on the saw while operating it.

• Always wear eye protection with side shields marked to comply with

ANSi Z87.1. Failure to do so could result in objects being thrown into your

eyes, possibly resulting in serious injury.

• Do not use this product with other equipment or for other purposes.

• Always disconnect the saw from the power supply before assembling this kit. Make sure the switch is off when reconnecting the saw to a power supply.

• Before making a cut, be sure that all adjustments are secure.

• Always get help if you need to lift the stand. When lifting, hold the stand close

to your body. Bend your knees so you can lift with your legs, not your back.

• When hauling the stand in a vehicle, securely tie it down to prevent movement and possible damage.

• Never put the stand where operators or bystanders are forced to stand with

any part of their body in line with the path of the saw blade.

• Never stand on the stand. Serious injury could occur if the stand tips or

you accidentally hit the cutting tool. Do not store any items above or near the stand where anyone might climb on the stand to reach them.

• Maximum combined weight of saw and workpiece must not exceed 300 ibs.

• Always mount a miter saw so that the workpiece is positioned in-line with

the work supports.

• Prior to use, check to make sure the stand does not rock, slide or move.

• Put the stand on a firm level surface where there is plenty of room to handle and properly support the workpiece.

Page 6 3760 Manual_Revised_12 1204

+ 14 hidden pages