Operator's Manual
ICRA MAN°I
flEX E
12.0-VOLT LITHIUM-ION
CORDLESS RIGHT-ANGLE
IMPACT DRIVER
Model No. 320.17562
c_ius
LISTED
• Warranty
Powered by an
ENERGYSTAR_
qualified battery
charger for a
better environment
_k WARNING: To reduce the risk of
injury, the user must read and understand
the Operator's manual before using
this product.
Sears Brands Management Corporation, Hoffman Estates,
IL 60179 U.S.A.
www.craftsma n.com
• Safety
• Assembly
• Operation
• Maintenance
• Espa_ol
Charge battery
before first use
InuPL4-'1ml_[o_ [_o__
Warranty page 2
Safety Symbols page 3
Safety Instructions page 5
Description page 9
Assembly page 10
Operation page 11
Maintenance page 19
Troubleshooting page 21
Exploded View and Part List page 22-24
Sears Repair Parts Phone Number Back Cover
CRAFTSMAN ONE YEAR LIMITED WARRANTY
FOR ONE YEAR from the date of purchase, this power tool, battery
pack and charger are warranted against any defects in material or
workmanship. With proof of purchase, defective product will be
replaced free of charge.
The purpose of safety symbols is to attract your attention to possible dangers.
The safety symbols and the explanations with them deserve your careful
attention and understanding. The symbol warnings do not, by themselves,
eliminate any danger. The instructions and warnings they give are no substitutes
for proper accident prevention measures.
WARNING: Be sure to read and understand all safety instructions in this
manual, including all safety alert symbols such as "DANGER," "WARNING,"
and "CAUTION" before using this Right-Angle Impact Driver. Failure to following
all instructions listed in this manual may result in electric shock, fire, and/or
serious personal injury.
SAFETY SYMBOL MEANING
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, OR CAUTION.
May be used in conjunction with other symbols or pictographs.
DANGER: Indicates an imminently hazardous situation, which, if not
avoided, will result in death or serious injury.
_, WARNING: Indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury.
For warranty coverage details to obtain free replacement, visit the
web site: www.craftsman.com
This warranty does not cover nut driver bits and screw driver bit which
are expendable parts that can wear out from normal use within the
warranty period.
This warranty is void if this product is ever used while providing
commercial services or if rented to another person.
This warranty gives you specific legal rights, and you may also have
_, CAUTION: Indicates an imminently hazardous situation, which, if not
avoided, may result in death or serious injury.
NOTE: These inform the user of import information and/or instructions that
could lead to equipment or other property damage if they are not followed. Each
message is preceded by the word "NOTE," as in the example below:
NOTE: Equipment and/or property damage may result if these instructions are
not followed.
other rights which vary from state to state.
Sears Brands Management Corporation, Hoffman Estates, IL 60179
SAVE THESE INSTRUCTIONS!
READ ALL INSTRUCTIONS
This cordless 12V Right-Angle Impact Driver has many features for making its
use more pleasant and enjoyable. Safety, performance, and dependability have
been given top priority in the design of this product making it easy to maintain
and operate.
_lk WARNING; Some dust created by using power tools contains chemicals
known to the state of California to cause cancer and birth defects or other
reproductive harm.
17562 Manual_Revised_$O 0607 Page 2 17562 ManuaLRevised_iO 0607 Page 3
WARNING: To ensure safety and reliability, all repairs should be performed
by a qualified service technician at a Sears parts & Repair Service Center.
_i, WARNING: The operation of any power tool can result
in foreign objects being thrown into your eyes, which can
result in severe eye damage. Before beginning power tool
operation, always wear safety goggles or safety glasses
with side shields and a full-face shield when needed.
We recommend a Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shields.
Always use eye protection which is marked to comply with
ANSI Z87.1
SAVE THESE INSTRUCTIONS
Some of these following symbols may be used on this tool. Please study them
and learn their meaning. Proper interpretation of these symbols will allow you to
operate the tool better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
Alternating Current Type of current
--_ Direct Current Type or a characteristic of current
n O No Load Speed Rotationai speed, at no Ioad
] Class II Construction Double-insulated construction
.../min Per Minute Revolutions, strokes, surface speed,
Wet Conditions Alert locations.
Read The Operator's Manuai read and understand operator's manuai
O Always wear safety goggles or safety
,_ Alert Precautions that involve
Eye Protection glasses with side shields and a full face
Safety safety.your
No Hands Symboi Failure to keep your hands away from theblade will result in serious personal injury.
No Hands Failure to keep your hands away from the
No Hands Symboi Failure to keep your hands away from theblade will result in serious personal injury.
Symbol
orbits, etc., per minute
Do not expose to rain or use in damp
To reduce the risk of injury, user must
before using this product.
shield when operating this product.
blade will result in serious personal injury.
GENERAL POWER TOOL SAFETY WARNINGS
_, WARNING: Read all safety warnings and instructions. Failure to follow
the warnings and instructions may result in electric shock, fire and/or serious
personal injury.
Save all warnings and instructions for future reference.
The term "power tool" in all warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
WORK AREA SAFETY
• Keep your work area clean and well lit. Cluttered or dark areas invite
accidents
Do not operate power tools in explosive environments, such as in the
presence of flammable liquids, gases, or dust. Power tools create sparks,
which may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool.
Distractions may cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce the risk of electric shock.
Avoid body contact with grounded surfaces, such as pipes, radiators,
ranges, and refrigerators. There is an increased risk of electric shock if your
body is grounded.
Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling, or
unplugging the power tool. Keep the cord away from heat, oil, sharp
edges, or moving parts. Damaged or entangled cords increase the risk of
electric shock.
• When operating a power tool outdoors, use an extension cord suitable
for outdoor use. Use of a cord suitable for outdoor use reduces the risk of
electric shock.
No Hands Symboi Failure to keep your hands away from the
Hot Surface To reduce the risk of injury or damage,avoid contact with any hot surface.
17562 ManuaLRevised_$O 0607 Page 4
blade will result in serious personal injury.
• If operating a power tool in a damp location is unavoidable, use a
residual current device (RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
• NOTE: The term "residual current device (RCD)" may be replaced by the
term "ground fault circuit interrupter (GFCI)" or "earth leakage circuit breaker
(ELCB)".
17562 ManuaLRevised_lO 0607 Page 5
• Use the battery only with the charger listed:
BATTERY PACK CHARGER
320.11221 320.10006
PERSONAL SAFETY
Stay alert, watch what you are doing, and use common sense when
operating a power the tool. Do not use a power tool while tired or under
the influence of drugs, alcohol, or medication. A moment of inattention
while operating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye protection.
Protective equipment, such as dust mask, non-skid safety shoes, hard hat,
or hearing protection, used for appropriate conditions will reduce personal
injuries.
Prevent unintentional starting. Ensure that the switch is in the OFF
position before connecting to power source and/or battery pack,
picking up, or carrying the tool. Carrying power tools with your finger
on the switch or energizing power tools that have the switch on invites
accidents.
Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a rotating part of the power tool may result
in personal injury.
Do not overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair,
clothing and gloves away from moving parts. Looseclothes, jewelryor
long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction and
collection facilities, ensure that these are connected and properly used.
Use of these devices can reduce dust-related hazards.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and more safely at
the rate for which it was designated.
Do not use the power tool if the switch does not turn it on and off. Any
power tool that cannot be controlled with the switch is dangerous and must
be repaired.
Disconnect the plug from the power source and/or the battery pack
from the power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool. Power tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
power tool's operation. If damaged, have the power tool repaired before
use. Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
Use the power tool, accessories, blades, etc. in accordance with these
instructions and in the manner intended for the particular type of
power tool, taking into account the working conditions and the work
to be performed. Use of the power tool for operations different from those
intended could result in a hazardous situation.
BATTERY TOOL USE AND CARE
Recharge only with the charger specified by the manufacturer. A charger
that is suitable for one type of battery pack may create a risk of fire when
used with another battery pack.
Use power tools only with specifically designated battery packs. Use of
any other battery packs may create a risk of injury and fire.
When the battery pack is not in use, keep it away from other metal
objects, such as paper clips, coins, keys, nails screws, or other small
metal objects that can make a connection from one terminal to another.
Shorting the battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery;
avoid contact. If contact accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help, Liquidejected from the
battery may cause irritation or burns.
SERVICE
• Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power
tool is maintained.
When servicing a power tool, use only identical replacement parts.
Follow instructions in the Maintenance section of this manual. Use of
unauthorized parts or failure to follow Maintenance instructions may create a
risk of shock or injury.
17562 ManuaLRevised_iO 0607 Page 6 17562 ManuaLRevised_iO 0607 Page 7
SPECIFIC SAFETY RULES FOR CORDLESS RIGHT ANGLE IMPACT DRIVER _]__o_j
Hold power tools by insulated gripping surfaces when performing an
operation where the tool may contact hidden wiring or its own cord.
Contact with a "live" wire will also make exposed metal parts of the tool
"live" and shock the operator.
Secure the workpiece. Clamping devices or a vise will hold the workpiece
in place better than the hand
Always wait until the machine has come to a complete stop before
placing it down. The tool can jam and lead to loss of control over the power
tool.
Before performing any kind of work on the machine (e. g., maintenance,
tool change, etc) as well as when transporting and storing it, always
set the rotational direction switch to the center position. Unintentional
activation of the On/Off switch may result in personal injury.
Do not open the battery. There is risk of a short circuit.
Protect the battery from heat and fire. There is risk of explosion.
Wear ear protectors with impact drills. Exposure to noise can cause
hearing loss
Use protective gloves when removing the bit from the tool, or first allow
the clamp to cool down. The bit may be hot after prolonged use.
Use protective gloves when operating the tool. Protective gloves can help
to keep you from being burnt and hurt.
Keep your hands away from the motor-housing vents. Hot gas comes
from the vents during operation.
Do not operate the tool at full-load for more than 30 seconds, as this can
cause the motor to become too hot, which may damage the motor.
Release the trigger immediately when the fasteners are sufficiently
tightened to avoid breaking the fasteners.
For best results, your battery tool should be charged in a location where the
temperature is more than 32°F (O°C) but less that 104°F (40°C). Do not store
outside or in vehicles.
KNOW YOUR RIGHT-ANGLE IMPACT DRIVER (Fig.l)
Fig. 1
Sleeve
Direction of
Rotation Selector
(Forward/Center
LED
Worklight
Variable
Speed Trigger
Switch
Battery Pack
Motor 12 Volt DC
Collar 1/4"
Switch VSR (Variable Speed Reversible)
No Load Speed 0-2100 RPM
Impacts per minute 0-3400 BPM
Torque 700 in.lbs
Driver Weight (without battery) 1.83 Ibs (without battery)
Battery Type Lithium-Ion
Battery Voltage 12 Volt DC
Charger Input 120-Volts, 60 Hz AC only
Optimum Charging Temperature 32°F (0°C) -104°F (40°C)
Lock/Reverse)
Battery Release
Button
PRODUCT SPECIFICATION
FuelGauge
17562 ManuaLRevised_lO 0607 Page 917562 Manual_Revised_SO 0607 Page 8