Craftsman 22299 Owner’s Manual

Owner's Manual

[ I

I,CR"FTS"nNI!

Folding Miter Saw Stand

Stock No. 22200

HTC Products

• Safety

• Assembly

• Operation

• Parts

CAUTION:

Before using this product, read this manual and follow

all its Safety Rules and Operating Instructions.

SEARS, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

Visit our Craftsman Website: www.sears.com/craftsman

Congratulations

You have just purchased a 22299 Folding Miter Saw Stand. This product has been specifically designed to assist you

in the use of your 10-12" miter saw.

Parts 44 TT

Figure, 4 "_ 4

0

0

_Snap Button RightLeg(rear)_

(_ _ LeftLeg(front)

ModelNumber

A TopFrame
B StraightLegs
C CurvedLegs

D OutriggerSupports

E Support"T"
F MTGHookR/L

G ClampBracketR/L

H WheelMountRight

I WheelMountLeft
J 6" Wheels
K AluminumExtrusion

L Multi-Stop

5/16"-18 x 2 W' T-BOLT

t,.l"_

-- 5/16" FLAT WASHER
L- 5/16"-18 MULTI-STOP BOI.T

22299 ffl'Y

5096 1
2901 2

2900 2
5099 2

5098 2
2898R/L 1/1
2906R/L 1/1

2897 R 1
2897 L 1

H213 2

2896 2

2890 1
C227 4

C204 8

2343 1

ModelNumber 22299 QTY

¢_" Leg Plugs(right) 2908R 2

_. Leg Plugs(left) 2908L 2
_. 5/16" LockWashers C226 4
_" 5/16" HexNut C202 4

---r- 1/4"- 20 x 5/8" HexBolts D122 12
u... 1/4"- 20 NylokNut D102 8

"4 1/4" - 20x 1-3/4" HexBolt D139 4

",N 5/16" - 18x 1/2" 3-PointKnob G101 5

5/16" - 18 x 1-1/2" 3-PointKnob G103 2

"!" ThreadedPlate 2902 1

__ LatchPin(wheelaxles) F206 2

#=_,.-4SnapButton F103 4

X_' 1/4"- 20 SerratedFlangeNut Dl18 8

¢_.-_ 1/4"- 20 CarriageBolt D138 4

2

General Safety Instructions for

Power Tools

Using power tools of any kind can be dangerous if safe operating procedures

are not followed. Recognizing the hazards of each tool and using them with

respect and caution will considerably limit the possibility of personal injury.
However, if safety precautions are ignored, personal injury will likely result.

Always use common sense - your personal safety is your responsibility.

1. Know your power tool. Read and understand the Owner's Manual and
observe the warnings and instruction labels affixed to the tool.

2. Properly ground all tools.

3. Keep guards in place.

4. Remove adjusting keys and wrenches.

5. Keep work area clean and dry.

6. Keep children away.

7. Never leave running machines/tools unattended,

.bolt (D213) is for u$e When attaching

8. Disconnect tools from service.

9. Use correct tools for the job.

10. Never force a tool.

11. Wear safety apparel.

12. Wear safety glasses/goggles.

13. Never stand or sit on tools.

14. Replace damaged components immediately.

15. Make sure your work platform is sufficiently sturdy to do the specific job
at hand.

16. Properly anchor power tools to work stands.

17. Use correct blade for job being done.

18. Think Safety. Safety is a combination of operator awareness, common

sense and alertness at all times.

22299 Hardware List Update

Please update lt'4"-20x5/8" he× bolt

(_)122) quanity to 8 (originally 12).

I_ew part (4 only) 1/4-20x5/8" carriage

v#heel "e{xle brackets to the frame in

step 3.

Safety Instructions for

Miter Saw Stands

1. Use caution when folding or unfolding legs to limit any finger pinch points.

2. Place stand on flat and level surface to keep tool from rocking or tipping.

3. Make certain that work support extensions are within safe operating limits,

and are properly locked in place before using tool. De not exceed 500 Ibs.

on main frame table.

4. Test the setup for stability before proceeding with work.

5. Be sure the miter saw is tightened securely at all mountings before use or

folding the stand for transport.

3