Craftsman 13899078 Owner’s Manual
OPERATOR'S MANUAL
MANUEL DEL OPERADOR
II:RR FTSHRN I
9 AMP ELECTRIC BLOWER
SOPLADOR ELC:CTRICO DE 9 AMP
Model No.
138. 99078
NQmero de modelo
138. 99078
A
Alt WARNING: To reduce the risk
of injury, the user must read and
understand the operator's manual
before using this product.
A
411 ADVERTENCIA: Para reducirel
riesgo de lesiones, el usuario debe Jeer
y comprender el manual del operador
antes de usar este producto.
Customer Help Line: 1-888-288-7098
Tel_fonodeatenci6n alconsumidor: 1-888-266-7096
Sears Brands Management Corporation, Hoffman Estates, IL 60179 USA
Visit the Craftsman web page: www.craftsman.com
Visite et sitio web de Craftsman: www.craftsman.com
Save this manual for future reference
Guarde este manual para futuras consulta
218549
ENGLISH ESPANOL
• Warranty ................................................................... 2 • Garantfa ............. Inlges seccion ............................... 2
• Introduction ............................................................... 2 •
• Important safety instructions ..................................... 3 •
• Specific safety rules .................................................. 5 •
• Symbols .................................................................... 6 •
• Electrical .................................................................... 7 •
• Features .................................................................... 8 •
• Assembly ................................................................... 8 •
• Operation .................................................................. 9 •
• Maintenance ............................................................ 10•
• Illustrated parts list................................................... 11 •
• Figure numbers (illustrations) .................................. i-ii
CRAFTSMAN ®TWO YEAR FULL WARRANTY
FOR TWO YEARS from the date of purchase, this product is warranted against defects in material or workmanship.
For warranty coverage details to obtain free replacement, visit the web site: www.craftsman.com
This warranty is void if this product is ever used while providing commercial services or if rented to another person.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears Brands Management Corporation, Hoffman Estates, IL 60179
GARANT|A COMPLETA DE UN AI_IO CRAFTSMAN e
Esta producto tiene garantfa por cualquier defecto en material o mano de obra DURANTE DOS ANOS desde la
fecha de compra.
Para conocer los detalles sobre la cobertura de la garantia para obtener un remplazo gratuito, visite el sitio
web: www.craftsman.com.
La garantia pierde validez si este producto se utiliza mientras se prestan servicios comerciales o sise alquila a otra persona.
Esta garantfa le otorga derechos legales especificos y es posible que tambien tenga derechos que varian segt_nel estado.
Sears Brands Management Corporation, Hoffman Estates, IL 60179
Introducci6n .............. Inlges seccion ......................... 2
Instrucciones de seguridad importantes .................. 3
Reglas de seguridad espedficas ............................. 5
Sfmbolos .................................................................. 6
Aspectos electricos .................................................. 7
Caracterfsticas ......................................................... 8
Armado .................................................................... 8
Funcionamiento ....................................................... 9
Mantenimiento ........................................................ 10
Figura numeras (ilustraciones) ............................... i-ii
This tool has many features for making its use more pleasant and enjoyable. Safety, performance, and
dependability have been given top priority in the design of this product making it easy to maintain and operate.
Esta herramienta ofrece numerosas caracteristicas para hacer ma.s agradable y placentero su uso. En el
dise_o de este producto se ha conferido prioridad a la seguridad, el desempe¢_o y la fiabilidad, por Io cual se
facilita su manejo y mantenimiento.
2 -- English
,_ WARNING: READ AND UNDERSTAND •
ALL INSTRUCTIONS BEFORE USING THIS
APPLIANCE. Failure to follow all instructions •
listed below may result in electric shock, fire,
and/or serious personal injury.
READ THESE INSTRUCTIONS BEFORE USING
THIS BLOWER
• Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power tools
create sparks which may ignite the dust or fumes. •
• To reduce the risk of electric shock, this tool has a
polarized plug (one blade is wider than the other)
and will require the use of a polarized extension
cord. The plug will fit into a polarized extension •
cord only one way. If the plug does not fit fully into
the extension cord, reverse the plug. If the plug still
does not fit, obtain a correct polarized extension •
cord. A polarized extension cord will require the
use of a polarized wall outlet. This plug will fit into
the polarized wall outlet only one way. If the plug
does not fit fully into the wall outlet, reverse the
plug. If the plug still does not fit, contact a qualified •
electrician to install the proper wall outlet. Do
not change the equipment plug, extension cord
receptacle, or extension cord plug in any way.
• Avoid body contact with grounded surfaces such
as pipes, radiators, ranges, and refrigerators.
There is an increased risk of electric shock if your
body is grounded.
• Don't expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk
of electric shock.
Do not handle plug or tool with wet hands.
Use outdoor extension cords marked W-A, W, SW- •
A, SOW-A, STW-A, STOW-A, SJW-A, SJTW-A, or
SJTOW-A. These cords are rated for outdoor use
and reduce the risk of electric shock. •
• Never allow children to operate the equipment.
Never allow adults to operate the equipment
without proper instruction.
• Wear eye protection with side shields which are
marked to comply with ANSI Z87.1 as well as
hearing protection when operating this product.
• Always use face or dust mask if operation is dusty.
• Use extra care when cleaning on stairs.
• Do not leave appliance plugged in. Unplug from
outlet when not in use and before servicing.
• Do not expose to rain, store indoors.
Use only as described in this manual. Use only
manufacturer's recommended attachments.
Keep hair, loose clothing, fingers and all body parts
away from openings and moving parts.
To reduce the risk of electric shock, this appliance
has a polarized plug (one blade is wider than the
other). This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified
electrician to install the proper outlet. Do not change
the plug in any way.
Wear heavy long pants, long sleeves, boots, and
gloves. Avoid loose garments or jewelry that could
get caught in moving parts of the machine or its
motor.
Do not force tool. Use the correct tool for your
application. The correct tool will do the job better
and safer at the rate for which it is designed.
Do not operate the equipment while barefoot
or when wearing sandals or similar lightweight
footwear. Wear protective footwear that will protect
your feet and improve your footing on slippery
surfaces.
Do not use on steps, a ladder, roof top, tree, or other
unstable support. Stable footing on a solid surface
enables better control of the blower in unexpected
situations.
• Secure long hair so it is above shoulder level to
prevent entanglement in any moving parts.
• Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance.
• Turn off all controls before unplugging.
• Do not allow to be used as a toy. Close attention is
necessary when used by or near children.
Avoid accidental starting. Be sure the power switch
is not on before plugging in. Turn switch off before
unplugging.
Do not use tool if switch does not turn it on or off.
Any tool that cannot be controlled with the switch is
dangerous and must be repaired.
• Do not use with damaged plug. If tool is not working
as it should or has been dropped, damaged, left
outdoors, or dropped into water, return it to an
authorized service center.
• Do not leave the tool when plugged in. Unplug from
the power outlet when not in use, before servicing,
and before storing the tool. Such preventative
safety measures reduce the risk of starting the tool
accidentally.
• Keep all bystanders, children, and pets at least 50
ft. away.
3 -- English
Donotoperatethisunitwhenyouaretired,ill,
upsetorundertheinfluenceofalcohol,drugs,or
medication.
• Donotoperateinpoorlighting.
• Keepallpartsofyourbodyawayfromanymoving
partsandallhotsurfacesoftheunit.
• Donotputanyobjectintoopenings.Donotuse
withanyopeningblocked;keepopeningsfreeof
dust,lint,hair,andanythingthatmayreduceair
flow.
• Checktheworkareabeforeeachuse.Remove
allobjectssuchasrocks,brokenglass,nails,•
wire,orstringwhichcanbethrownorbecome
entangledinthemachine.
• Neveruseblowernearfires,fireplaces,hot
ashes,barbecuepits,etc.,whichmaycausefire
tospread.
• Donotpullorcarrybycord,usecordasahandle,
closeadooronacord,orpullcordaroundsharp
edgesorcorners.Donotrunapplianceovercord.
Keepcordawayfromheatedsurfaces.
• Donotunplugbypullingoncord.Tounplug,
grasptheplug,notthecord.
• Donothandleplugorappliancewithwethands.
• Donotputanyobjectintoopenings.Donotusewith
• Useonlyidenticalmanufacturer'sreplacementparts
• Donotusewithdamagedcordorplug.Ifappliance
anyopeningblocked;keepfreeofdust,lint,hair,
andanythingthatmayreduceairflow.
andaccessories.Useofanyotherpartsmaycreate
ahazardorcauseproductdamage.
isnotworkingasitshould,hasbeendropped,
damaged,leftoutdoors,ordroppedintowater,
returnittoaservicecenter.
Inadoubleinsulatedappliance,twosystemsof
insulationareprovidedinsteadofgrounding.No
groundingmeansisprovidedonadoubleinsulated
appliance,norshouldameansforgroundingbe
addedtotheappliance.Servicingadoubleinsulated
appliancerequiresextremecareandknowledgeof
thesystemandshouldbedoneonlybyqualified
servicepersonnel.Replacementpartsforadouble
insulatedappliancemustbeidenticaltotheparts
theyreplace.
Forhouseholduseonly.
4--English
• Makesureyourextensioncordisingoodcondition.•
Whenusinganextensioncord,besuretouseone
heavyenoughtocarrythecurrentyourproductwill
draw.Awiregaugesize(A.W.G.)ofatleast14is
recommendedforanextensioncord50feetorless
inlength.Ifindoubt,usethenextheaviergauge.
Thesmallerthegaugenumber,theheavierthecord.
Anundersizedcordwillcauseadropinlinevoltage
resultinginlossofpowerandoverheating.
• Donotpointtheblowernozzleinthedirectionof
peopleorpets.
• Neverplacebloweronanysurface,exceptahard,
cleansurfacewhenmotorisrunning.Gravel,sand, •
andotherdebriscanbepickedupbytheairinlet
andthrownattheoperatororbystanders,causing
possibleseriousinjuries. •
• Neverruntheunitwithouttheproperequipment
attached.Alwaysensuretheblowertubeisinstalled.
• Whennotinuse,blowershouldbestoredindoorsin •
adry,lockedupplace--outofthereachofchildren.
• Maintaintoolwithcare.Keepfanareacleanfor
bestandsafestperformance.Followinstructionsfor
propermaintenance.
CALIFORNIA PROPOSITION 65
,_ WARNING: This product and some dust created by power sanding, sawing, grinding, drilling, and
other construction activities may contain chemicals, including lead, known to cause cancer, birth defects or
other reproductive harm. Wash hands after handling.
Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such
as those dust masks that are specially designed to filter out microscopic particles.
Donotattempttoclearclogsfromtoolwithout
firstunpluggingit.
Donotpullorcarrybycord,usecordas
ahandle,orpullcordaroundsharpedges
orcorners.Keepcordawayfromheated
surfaces.
• Donotunplugbypullingoncord.Tounplug,
grasptheplug,notthecord.
• Toreducetheriskofelectricalshock,donot
exposetorain,donotuseonwetsurfaces.
Storeindoors.
Ifthepowersupplycordisdamaged,itmust
bereplacedonlybythemanufacturerorbyan
authorizedservicecentertoavoidrisk.
Protectyourlungs.Wearafaceordustmask
iftheoperationisdusty.Followingthisrulewill
reducetheriskofseriouspersonalinjury.
Savetheseinstructions.Referto them
frequentlyandusethemtoinstructotherswho
mayusethispowertool.Ifyouloansomeone
thispowertool,loanthemtheseinstructions
also.
SAVE THESE INSTRUCTIONS
5 -- English
The following signat words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL MEANING
_h, Indicates an imminently hazardous situation, which, if not avoided, will result
,_ Indicates a potentially hazardous situation, which, if not avoided, could result
,_, Indicates a potentially hazardous situation, which, if not avoided, may result in
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME DESIG NATION/EXPLANATION
,_ Safety a potential personal injury
O Always wear eye protection with side shields marked to comply
rain Minutes Time
DANGER: in death or serious injury.
WARNING: in death or serious injury.
CAUTION: minor or moderate injury.
NOTICE: (Without Safety Alert Symbol) Indicates important information not related to an
AJert Indicates hazard.
Read
Operator's
Eye and Hearing Protection with ANSI Z87.1, along with hearing protection.
Wet Conditions Alert Do not expose to rain or use in damp locations.
Keep Bystanders Away Keep all bystanders at least 50 ft. away.
Blower Tubes Do not operate without tubes in place.
Loose
Clothing
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
Alternating Current Type of current
Direct Current Type or a characteristic of current
[] Class II Construction Double-insulated construction
injury hazard, such as a situation that may result in property damage.
Manual
To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Failure to keep long hair away from the air inlet could result inLong Hair personal injury.
Failure to keep loose clothing from being drawn into air intake
could result in personal injury.
6 -- English
DOUBLE INSULATION
Double insulation is a concept in safety in electric power
tools, which eliminates the need for the usual three-
wire grounded power cord. All exposed metal parts are
isolated from the internal metal motor components with
protecting insulation. Double insulated tools do not need
to be grounded.
_1, WARNING:The double insulated system isintended
to protect the user from shock resulting from a break
in the tool's internal insulation. Observe all normal
safety precautions to avoid electrical shock.
NOTE: Servicing of a product with double insulation requires
extreme care and knowledge of the system and should be
performed only by a qualified service technician. For service,
we suggest you return the product to your nearest authorized
service center for repair. Always use original factory replace -
ment parts when servicing.
ELECTRICAL CONNECTION
This product has a precision-built electric motor. It should
be connected to a power supply that is 120 volts, AC only
(normal household current), 60 Hz. Do not operate this
product on direct current (DC). A substantial voltage drop
will cause a loss of power and the motor will overheat. If
the product does not operate when plugged into an outlet,
double-check the power supply.
EXTENSION CORDS
See Figure 1, page L
When using a power tool at a considerable distance from
a power source, be sure to use an extension cord that has
the capacity to handle the current the product will draw. An
undersized cord will cause a drop in line voltage, resulting in
overheating and loss of power. Use the chart to determine
the minimum wire size required in an extension cord. Only
round jacketed cords listed by Underwriter's Laboratories
(UL) should be used.
When working outdoors with a product, use an extension
cord that is designed for outside use. This type of cord is
designated with "WA" on the cord's jacket.
Before using any extension cord, inspect it for loose or ex -
posed wires and cut or worn insulation.
A proper extension cord is available at an authorized service
center.
It is possible to tie the extension cord and power cord in a
knot to prevent them from becoming disconnected during
use. Make the knot as shown in figure 1, then connect the
plug end of the power cord into the receptacle end of the
extension cord. This method can also be used to tie two
extension cords together.
**Ampere rating (on product data p_ate}
0-2.0 2.1-3.4 3.5-5.0 5.1-7.0 7.1-12.0 12.1-16.0
Cord Length Wire Size (A.W.G.)
25' 16 16 16 16 14 14
50' 16 16 16 14 14 12
100' 16 16 14 12 10 --
**Used on t2 gauge - 20 amp circuit.
NOTE: AWG - American Win Gauge
,_ WARNING: Keep the extension cord clear of the
working area. Position the cord so that it will not get
caught on lumber, tools, or other obstructions while
you are working with a power tool. Failure to do so
can result in serious personal injury.
_lh WARNING:Check extension cords before each
use. If damaged replace immediately. Never use the
product with a damaged cord since touching the
damaged area could cause electrical shock resulting
in serious injury.
71 English
PRODUCTSPECIFICATIONS
Motor...................................................................................................................................120V,AConly,60Hz,9.0Amps
Airvelocity................................................................................................................................................................180MPH
Airvolume.................................................................................................................................................................169CPM
Weight.........................................................................................................................................................................4.52lb.
KNOWYOURBLOWER
See Figure 1,page L
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
UNPACKING
This product requires assembly.
• Carefully remove the product and any accessories
from the box. Make sure that all items listed in the
packing list are included.
,_ WARNING: Do not use this product if any
parts on the Packing List are already assembled
to your product when you unpack it. Parts on
this list are not assembled to the product by the
manufacturer and require customer installation.
Use of a product that may have been improperly
assembled could result in serious personal
injury.
• Inspect the product carefully to make sure no
breakage or damage occurred during shipping.
• Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
• If any parts are damaged or missing, call 1-888-
266-7096 for assistance.
BLOWER TUBES
The blower tubes can be installed on the blower without
using any tools.
CORD RETAINER
A convenient cord retainer helps keep the extension cord
connection secure during blower operation.
WARNING: If any parts are damaged or
missing do not operate this product until the parts
are replaced. Use of this product with damaged
or missing parts could result in serious personal
injury.
,_k WARNING" Do not attempt to modify this
product or create accessories not recommended
for use with this product. Any such alteration
or modification is misuse and could result in a
hazardous condition leading to possible serious
personal injury.
,_k WARNING: To prevent accidental starting
that could cause serious personal injury, always
remove the battery pack from the product when
assembling parts.
ASSEMBLING THE BLOWER TUBE See Figure 2,
page L
• Slide blower tube forward until the notched
areas on the blower housing click into the slots
on the tube.
PACKING LIST
Blower
Blower Tube
Operator's Manual
8 -- English
,_WARNING: Do not allow familiarity with this •
product to make you careless. Remember that
a careless fraction of a second is sufficient to
inflict serious injury.
A "WARNING: Always wear eye protection with
side shields marked to comply with ANSI Z87.1, •
along with hearing protection. Failure to do so
could result in objects being thrown into your
eyes and other possible serious injuries. •
_,WARNING: Do not use any attachments •
or accessories not recommended by the
manufacturer of this product. The use of •
attachments or accessories not recommended
can result in serious personal injury.
_,WARNING: Blower is intended for household
use only.
Before each use, inspect the entire product for
damaged, missing, or loose parts such as screws,
nuts, bolts, caps, etc. Tighten securely all fasteners and
caps and do not operate this product until all missing or
damaged parts are replaced. Call 1-888-266-7096 for
assistance in obtaining replacement parts.
APPLICATIONS
You may use this product for the purposes listed below: •
• Clearing hard surfaces such as driveways and
walkways
• Keeping decks and driveways free from leaves •
and pine needles
STARTING/STOPPING THE BLOWER See Figure 3
page ii. •
NOTICE:
Always secure extension cord to unit by using cord
retainer. Failure to use cord retainer may result in
damage to the unit and/or extension cord.
Attach the outlet end of an extension
cord to the plug on the rear of the blower.
NOTE: Use only an approved outdoor extension
cord as described previously in this manual.
Form a loop with the extension cord.
Insert the loop portion of the extension cord up
through the opening on the rear of the blower
housing and place over the cord retainer.
Slowly pull loop against cord retainer until the slack
is removed.
To start the blower, place the on/off switch in the
ON position.
To stop the blower, place the on/off switch in the
OFF position.
OPERATING THE BLOWER See Figure 5.
• To keep from scattering debris, blow around the
outer edges of a debris pile. Never blow directly
into the center of a pile.
• To reduce sound levels, limit the number of pieces
of equipment used at any one time.
• Use rakes and brooms to loosen debris before
blowing. In dusty conditions, slightly dampen
surfaces when water is available.
Conserve water by using power blowers instead
of hoses for many lawn and garden applications,
including areas such as gutters, screens, patios,
grills, porches, and gardens.
Watch out for children, pets, open windows, or
freshly washed cars, and blow debris safely away.
Hold the blower with the handle in your right hand.
(Proper operating position is shown in figure 5.)
Operate power equipment at reasonable hours
only -- not early in the morning or late at night
when people might be disturbed. Comply with the
times listed in local ordinances.
• Operate blower at the lowest possible throttle
speed to do the job.
• After using blowers or other equipment, CLEAN
UP) Dispose of debris properly.
9 -- English
,_WARNING: This appliance is provided with
double insulation. When servicing, use only
identical replacement parts. Use of any other
parts could create a hazard or cause product
damage. See instruction for servicing of
Double-Insulated Appliances.
,_,WARNING: Always wear eye protection
with side shields marked to comply with ANSI
Z87.1, along with hearing protection. Failure to
do so could result in objects being thrown into
your eyes, resulting in possible serious injury.
,_,WARNING: Before inspecting, cleaning or
servicing the machine, unplug the power cord
and wait for all moving parts to stop. Failure to
follow these instructions can result in serious
personal injury or property damage.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types
of commercial solvents and may be damaged by their
use. Use clean cloths to remove dirt, dust, oil, grease,
etc.
,_WARNING: Do not at any time let brake fluids,
gasoline, petroleumbased products, penetrating oils,
etc., come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic, which could result
in serious personal injury.
STORAGE (1 MONTH OR LONGER)
• Clean all foreign material from the blower.
• Store indoors in a place that is inaccessible to
children.
Keep away from corrosive agents such as garden
chemicals and de-icing salts.
10 -- English
CRAFTSMAN9AMP ELECTRIC BLOWER - MODEL NUMBER 138. 99078
The model number will be found on a label attached to the motor housing. Always mention the model !
number when calling to order replacement parts. To order parts, call 1-888-266-7096. ]
.................. t ......... f! ................
1
PARTS LIST
Key Part
No. Number
1 31319204
2 31329204
Description Qty
Tube ...................................................................................................... 1
Blower .................................................................................................... 1
10
See this section for all of the figures referenced in the
operator's manual.
Consulte esta seccion para ver todas las figuras a las que se hace
referencia en el manual del operador.
Fig.1 A
B
D
Fig.2
C
A- Powerswitch (interrupteurde marche/arr6t,interrupterde_
energ[a)
B- Blowertube(tube de souffiante,tube de sopladora)
C- Cord retainer(retenuede cordon, retenpara el cord6n)
D- Plug (fiche,clavija)
B
)
A- Notchedarea (zone striee,Areaestriada)
B- Slot(fente,ranura)
C- Blowertube (tubede soufflante,tubo de
sopladora)
D- Airoutlet (sortie d'air,toma de aire)
Fig. 3
A
B
D
A- Loop(boucle,argotla)
B- Plug(fiche,ciavija)
C- Extensioncord (ratlonge,cord6nde extensi6n)
D- Cord retainer(retenuede cordon, retenpara el cord6n)
Fig.4
ON
OFF
Fig.5
A- Powerswitch (interrupteurde marche/arr6t,interruptor
de energfa)
Loading...