Craftsman 138.98981 Owner's Manual

13-inch STRING TRIMMER

13-pulgadas RECORTADORA DE HILO

MODEL NO.

138.98981

138.98981

1-888-266-7096

www.craftsman.com

1-888-266-7096

www.craftsman.com

Garantía sección inglés

• •

Introducción sección inglés

.7-8
.8-9

....10

12

TWO YEAR LIMITED WARRANTY

FOR TWO YEARS from the date of purchase this power tool is warranted against any defects in material or workmanship.
With proof of purchase, a defective product will be replaced free of charge.

.

For warranty coverage details to obtain free replacement, visit the web page: www.craftsman.com/warranty

This warranty does not cover the trimming line or replacement spool, which are expendable parts that can wear out from
normal use within the warranty period. This warranty is void if this product is ever used while providing commercial
services or if rented to another person. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.

Sears Brands Management Corporation, Hoffman Estates, IL 60179

TWO YEAR LIMITED WARRANTY

FOR TWO YEARS from the date of purchase this power tool is warranted against any defects in material or workmanship.
With proof of purchase, a defective product will be replaced free of charge.

For warranty coverage details to obtain free replacement, visit the web page: www.craftsman.com/warranty

This warranty does not cover the trimming line or replacement spool, which are expendable parts that can wear out from
normal use within the warranty period. This warranty is void if this product is ever used while providing commercial
services or if rented to another person. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.

.

For safe operation, read and understand all
instructions before using this product. Follow
all safety instructions. Failure to follow all safety
instructions listed below, can result in serious
personal injury.
Do not allow children or untrained individuals to
use this unit.
Check the work area before each use. Remove
all objects such as rocks, broken glass, nails,
wire, or string which can be thrown or become
entangled in the machine.
Always wear eye protection with side shields
which are marked to comply with ANSI Z87.1
when operating this product.

Use Safety Glasses – Always use face or dust
mask if operation is dusty.

Everyday glasses have only impact resistant
lenses. They are NOT safety glasses.
Following this rule will reduce the risk of eye
injury. Use face mask if operation is dusty.
Dress Properly – Use rubber gloves and
substantial footwear is recommended when
working outdoors.
Wear heavy, long pants, boots, and gloves. Do
not wear loose fitting clothing, short pants, or
go barefoot. Do not wear jewelry of any kind.
Secure long hair above shoulder level to
prevent entanglement in moving parts.
Keep children away - Keep all bystanders,
children, and pets at least 50 ft. away.
Stay alert - Do not operate this unit when you
are tired, ill, or under the influence of alcohol,
drugs, or medication.
Do not operate in poor lighting.
Keep all parts of your body away from any
moving part.
Do not operate power tools in explosive
atmospheres, such as in the presence of

flammable liquids, gases, or dust. Power tools
create sparks which may ignite the dust or
fumes.

To reduce the risk of electric shock, this tool
has a polarized plug (one blade is wider than
the other) and will require the use of a
polarized extension cord. The plug will fit into
a polarized extension cord only one way. If the
plug does not fit fully into the extension cord,
reverse the plug. If the plug still does not fit,
obtain a correct polarized extension cord. A
polarized extension cord will require the use of
a polarized wall outlet. This plug will fit into the
polarized wall outlet only one way. If the plug
does not fit fully into the wall outlet, reverse
the plug. If the plug still does not fit, contact a
qualified electrician to install the proper wall
outlet. Do not change the equipment plug,
extension cord receptacle, or extension cord
plug in any way.
Avoid body contact with grounded surfaces
such as pipes, radiators, ranges, and
refrigerators. There is an increased risk of
electric shock if your body is grounded.
Avoid Dangerous Environments - Don’t
expose power tools to rain or wet conditions.
Water entering a power tool will increase the
risk of electric shock.

Ground Fault Circuit Interrupter (GFCI)
protection should be provided on the circuit (s)
or outlet(s) to be used for the gardening
appliance. Receptacles are available having
built-in GFCI protection and may be used for
this measure of safety.
Use Right Appliance - Do not force tool. Use
the correct tool for your application. The
correct tool will do the job better and safer at
the rate for which it is designed.
Do not operate the equipment while barefoot or
when wearing sandals or similar lightweight
footwear. Wear protective footwear that will
protect your feet and improve your footing on
slippery surfaces.
Do not overreach. Keep firm footing and
balance. Over-reaching can result in loss of
balance.

Avoid Accidental Start – Do not carry plugged
in appliance with finger on trigger. Be sure the
switch trigger is not engaged before plugging
in.
Do not use tool if switch trigger does not turn it
on or off. Any tool that cannot be controlled with
the switch trigger is dangerous and must be
repaired.
Disconnect appliance from power source
before storing, servicing, changing accessories
such as cutting line. Such preventive safety
measures reduce the risk of starting the tool
accidentally.
Use only identical manufacturer’s replacement
parts and accessories. Use of any other parts
may create a hazard or cause product damage.
Maintain appliance with care - Replace string
head if cracked, chipped, or damaged in any
way.
Be sure the string head is properly installed
and securely fastened. Failure to do so can
cause serious injury.
Make sure all guards, straps, deflectors and
handles are properly and securely attached.
Use only the manufacturer’s replacement
string in the cutting head. Do not use any other
cutting attachment, for example, metal wire,
rope, or the like. To install any other brand of
cutting head to this string trimmer can result in
serious personal injury.
Never operate unit without the grass deflector
in place and in good condition.
Check damaged parts. Before further use of
the tool, a guard or other part that is damaged
should be carefully checked to determine that
it will operate properly and perform its intended
function. Check for alignment of moving parts,
binding of moving parts, breakage of parts,
mounting and any other conditions that may
affect its operation. A guard or other part that is
damaged must be properly repaired or
replaced by an authorized service center to
avoid riskof personal injury.
Maintain a firm grip on both handles while
trimming. Keep string head below waist level.
Nevercut with the string head located over 30in,
or more above the ground.

Store idle appliances - When not in use, string
trimmer should be stored indoors in a dry,
locked place out of the reach of children.
Make sure your extension cord is in good
condition. When using an extension cord, be
sure to use one heavy enough to carry the
current your product will draw. A wire gauge
size (A.W.G.) of at least 16 is recommended
for an extension cord 50 feet or less in length.
A cord exceeding 100 feet is not
recommended. If in doubt, use the next heavier
gauge. The smaller the gauge number, the
heavier the cord. An undersized cord will cause
a drop in line voltage resulting in loss of power
and overheating.
Never use blades or flailing devices. Unit is
designed for line trimmer use only. Use of any
other accessories or attachments will increase
the risk of injury. Inspect area to be cut.
Remove objects (rocks, broken glass, nails,
wire, string, etc.) which can be thrown or
become entangled in cutting head.
Keep the air vents clean and free of debris to
avoid overheating the motor. Clean after each
use.
Stop the unit and disconnect the power source
when not in use. Carry the unit with the motor
stopped.
Store unplugged and out of the reach of
children.
Do not hang unit so that the switch trigger is
depressed.
Do not use multiple cords.
Do not abuse the cord. Never carry the unit by
the extension cord or yank extension cord to
disconnect unit.
Keep the extension cord clear of operator and
obstacles at all times. Do not expose cords to
heat, oil, water, or sharp edges.
If the power supply cord is damaged, it must be
replaced only by the manufacturer or by an
authorized service center to avoid risk.
Save these instructions. Refer to them
frequently and use them to instruct others who
may use this power tool. If you loan someone
this power tool, loan them these instructions
also.

PROPOSITION 65

WARNING!

Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known
to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
lead from lead-based paints
crystalline silica from bricks and cement and other masonry products
arsenic and chromium from chemically-treated lumber
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these
chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.

5