VITM-ROSE
Vitesse Modular Ceiling Rose
VITM-ROSE mains wiring VITM-ROSE connector wiring
Live supply
Product Guide
Earth
Neutral
Permanent
Live
Each pole has two screw terminals.
Each terminal accepts 1 x 2.5mm2
Live supply
Earth
Neutral
Permanent Live
Conduit box to VITM4-S or VITM6-S connection
Use a VITM-ROSE when there is a need to take power from a conduit box. Plug the connector into the VITM-ROSE and
wire the other end of the lead into the terminals of the VITM4-S (illustrated below) or VITM6-S. Pre-wired versions are
available, VITM4-SL1 VITM6-SL1. See Product Guides for the VITM4-S and VITM6-S wiring details.
Screw fixings to
VITM-ROSE
conduit box
Technical data
Voltage 230VAC +/- 10%
Frequency 50Hz
Terminal capacity 2.5mm2
Temperature 0ºC to 35ºC
Power 16A
Compliance BS 5733:1995
For lighting purposes only with suitable circuit protection. For fixed wiring only.
IMPORTANT NOTICE!
This device should be installed by a qualified electrician in accordance with
the latest edition of the IEE wiring regulations.
FM 45789 EMS 534520
Due to our policy of continual product improvement CP Electronics reserves the right to alter the specification of this product without prior notice.
C.P. Electronics Ltd
Brent Crescent
London
NW10 7XR
United Kingdom
Tel: + 44 (0) 333 900 0671
Fax: + 44 (0) 333 900 0674
www.cpelectronics.co.uk
enquiry@cpelectronics.co.uk
Ref #WD467 Issue 5
Loading...