Product Guide
VITM6-ROSE
Vitesse Modular Ceiling Rose - 6 pole
Mains wiring Connector wiring
DALI
Dim +
DSI
1-10V
Dim -
Permanent Live
Neutral
Earth
Live supply
Standard cable core colours used by CP Electronics
Dim +
Dim -
Permanent Live
Neutral
Earth
Live supply
Red
White
Black
Blue
Green/yellow
Brown
VITM6-S connection
Use a VITM-ROSE when there is a need to take power
and dimming signal from a conduit box. Wire the end of
the flexible lead into the terminals of the VITM6-S before
plugging the connector into the VITM6-ROSE.
See VITM6-S Product Guide for wiring connection
details.
VITM6-ROSE
VITM6-S
Voltage 230V a.c.
Frequency 50Hz
Terminal capacity 2.5mm2
Temperature 0ºC to 40ºC
Current rating 16A
Compliance BS 5733:2010
For lighting purposes only with suitable circuit protection. For fixed wiring only.
Single phase use only.
IMPORTANT NOTICE!
This device should be installed by a qualified electrician in accordance with
the latest edition of the IEE wiring regulations.
Due to our policy of continual product impro vement CP Electronics reserves the right to alter the specification of this pr oduct without prior notice.
To provide a clearance hole for a M25
threaded gland (not supplied), snap in the
supplied moulding into the VITM6-ROSE
base.
4 x Ø4mm screw fixings suitable
for 51mm pitch BESA conduit box.
Fixings
Technical data
C.P. Electronics Ltd
Brent Crescent
London
NW10 7XR
United Kingdom
Tel: + 44 (0) 333 900 0671
Fax: + 44 (0) 333 900 0674
www.cpelectronics.co.uk
enquiry@cpelectronics.co.uk
Ref #WD739 Issue 1
Loading...