CP Electronics UHS7 User Manual

UHS7
Infrared User Handset
Product Guide
Overview
The UHS7 is a compact infrared handset used for:
Selecting scenes. Raising and lowering the scene light levels. Turning the lights on or off.
You must point the handset directly at the device that you want to control.
Care and maintenance
Replacing the Battery
The battery compartment is located on the bottom edge of the handset. Release the retaining lug to allow the battery holder to be slid out. Lift out the battery from the holder and insert a replacement battery (type CR2025 or equivalent), ensuring correct polarity. Slide the holder back into the handset, ensuring that the retaining lug clicks into place.
Cleaning the Handset
The exterior of the handset can be cleaned by using a damp cloth. Stubborn marks may be removed by using a mild detergent.
Accessing the internal battery
Technical data
Dimensions 86mm x 4mm x 67mm Weight 0.017kg Battery 3Vdc lithium battery CR2025 (supplied with unit) IR range 7m
Temperature 0ºC to 35ºC Humidity 5 to 95% non-condensing Compliance EMC-2004/108/EC
If any of these symbols are on the product or battery, the product or battery must be disposed of in the correct manner and must not be treated as household or general waste.
FM 45789 EMS 534520
Due to our policy of continual product improvement CP Electronics reserves the right to alter the specification of this product without prior notice.
C.P. Electronics Ltd
Brent Crescent London NW10 7XR United Kingdom Tel: + 44 (0) 333 900 0671 Fax: + 44 (0) 333 900 0674 www.cpelectronics.co.uk enquiry@cpelectronics.co.uk
Ref. #WD551 Issue 2
Loading...