BA13-AR/AE BA13-BR/BE
Product features
BA13-AR/AE/BR/BE Common Functions
1. Instant warm water system
The water is instantly heated when using the rear and front cleaning functions so that you can immediately use water at your desired temperature.
2. Air+ function
The water stream with air bubbles provides softer, stronger cleansing.
3. MESH Filter
The MESH filter is a semi-permanent item. You can use the filter repeatedly by cleaning it.
4. Eco mode
- Bidet eco mode: If the seat sensor does not detect someone sitting down or no panel or remote control button is pressed for approximately 10 minutes, the seat temperature is set to ‘L’, so that power consumption is reduced. When bidet eco mode is activated, the eco mode indicator on the front is turned on.
-Remote control eco mode: If no remote control button is pressed for approximately 5 seconds, the remote control display is turned off to reduce the power consumption of the remote control battery.
5.Stainless steel twin nozzle adopted for enhanced hygiene
By adopting Stainless steel nozzles, you can use the product more hygienically. In addition, the separation of the cleansing nozzle and the bidet nozzle ensures extra hygiene.
6.Wide Water Stream
A widely spread water stream applied to the cleaning water for smoother cleaning.
Additional functions for the BA13-BR/BE
1. Wide function
You can directly select the degree of spread of the cleansing water from a strong flow of water to a soft, spread-out water flow when using rear and front cleansing.
2. Deodorization function
Once the seat sensor detects a person sitting, the deodorization function automatically deodorizes odors for 1 minute. After using the bidet, the deodorization function will remain on for 3minutes ensuring a refreshed feeling.
3. Sterilization function using oxidized silver
This bidet sterilizes the nozzle with oxidized silver sterilizing water.
Contents
|
...................................Product features |
01 |
.............................Installing your bidet |
17 |
|
Contents ..................................................... |
01 |
Removing existing toilet seat ........................ |
17 |
|
Safety precautions ................................ |
02 |
Installing the product .................................... |
17 |
|
Part Names .................................................. |
07 |
Installing the remote control wall mount ........ |
19 |
|
Dimensions ................................................... |
07 |
Cleaning and maintaining your bidet ............... |
20 |
|
Front / Rear view ........................................... |
08 |
Cleaning the nozzles .................................... |
20 |
|
Remote control ............................................. |
08 |
Cleaning the product body ............................ |
20 |
|
Installation parts ........................................... |
09 |
Removing the product .................................. |
21 |
|
Check before using your product ..................... |
10 |
Cleaning the MESH filter ............................... |
21 |
|
Please keep in mind! ..................................... |
10 |
SPECIFICATIONS ........................................... |
23 |
|
Configuring a special mode .......................... |
11 |
troubleshooting .................................... |
24 |
|
Checking the control panel .............................. |
12 |
warranty CARD.......................................... |
25 |
|
Using your bidet ............................................... |
15 |
|
|
|
Using the rear nozzle .................................... |
15 |
|
|
1 |
...................................Using the front nozzle |
16 |
|
|
Safety precautions
IMPORTANT SAFETYGUARDS
Danger: If not observed, serious injury or even death may occur as a result of electrocution.
WARNING: If these warnings are not observed, considerable physical injury or property damage may occur as a result of burns, electrocution, fire, or injury.
CAUTION: If these cautions are not observed, slight physical injury or property damage may occur.
READ ALL INSTRUCTIONS BEFORE USING. Save these instructions for future reference.
When using electrical products, especially when children are present, basic safety precautions should always be followed:
Danger:
•Do not use a damaged power plug or loose electric outlet. This may result in electric shock or fire.
•Make sure to use a dedicated electrical outlet. Failing to do so may result in electric shock or fire.
•Do not move the product by pulling the power cord. This may result in electric shock or fire.
•Do not handle the power plug with wet hands. This may result in electric shock or fire.
•Do not forcefully bend the power cord or place heavy objects on it to prevent it from being damaged or deformed. This may result in electric shock or fire.
•Do not connect and pull out the power plug repeatedly. This may result in electric shock or fire.
•Unplug the product before repairing, inspecting, or replacing parts. Failing to do so may result in electric shock or fire.
•Remove any dust or water from the power plug. Failing to do so may result in electric shock or fire.
•Do not plug the appliance into an electrical outlet or power strip that is being used by several other appliances. Use an electrical outlet dedicated to the product. Failing to do so may result in fire.
•Unplug the system if it is not being used for a long period of time. Failing to do so may result in electric shock or fire.
•Do not attempt to repair or modify the power cord. This may result in electric shock or fire.
•If the power cord is damaged, do not replace the cord yourself. Call a Coway Service Center to have it replaced. Failing to do so may result in electric shock or fire.
save these instructions
2
Safety precautions
Danger:
•If the product produces a strange noise, a burnt smell, or emits smoke, unplug it immediately from the electrical outlet and call our service center. Failing to do so may result in electric shock or fire.
•Do not insert a wire or sharp object in any product gaps or the warm air outlet. This may result in electric shock, fire, or product damage.
•Do not place an electric heater near the product or dispose of any burning materials such as a lit cigarette in the toilet. This may result in fire or product deformation.
•Do not place any containers filled with water, medicine, food, any metallic objects, or any flammable material on top of the product. If foreign material enters the product, this may result in electric shock or fire.
•Do not use the product in locations exposed to excessive moisture and do not splash water onto the product. This may result in electric shock or fire.
•Do not use the product if it is not working properly.
Please unplug the product immediately, and call our service center after closing the main water supply valve. Failing to do so may result in electric shock or fire.
•While taking a shower or cleaning the bathroom, pull the power plug out of the electrical outlet and exercise caution that water or detergent does not splash onto the bidet. Failing to do so may result in electric shock or fire.
If foreign material enters the product, pull the power plug out of the electrical outlet, turn off the main water valve, and call the Coway Service Center.
•Do not drop the remote control. This may result in product damage or a malfunction.
•Do not separate the seat from the bidet. This may result in electric shock, fire, or product damage.
•Do not disassemble, repair, or modify the product yourself. This may result in electric shock, fire, or product damage.
•Do not use the product while bathing.
•Do not place or store the product where it can fall or be pulled into a tub or sink.
•Do not place in or drop the product into water or any other liquid.
•Do not reach for the product if it has fallen into water. Unplug the product immediately.
save these instructions
3
Safety precautions
WARNING:
•Do not operate or store the unit in locations where flammable or combustible materials are used. This may result in electric shock or fire.
•Use main water supply as the supplied water. Industrial water or gray water, if used as supply water may cause skin damage or disease.
•Do not block the warm air outlet with your hand. This may result in burns or fire.
•Please turn off the main water supply valve when cleaning the filter. Failing to do so may result in electric shock or product damage.
•For children, the elderly, and those who cannot adjust the temperature themselves or have sensitive skin, set the warm water temperature and seat temperature to ‘L.’ Failing to do so may result in low temperature burns.
About ‘low temperature burns’: This refers to burns inflicted by making contact with temperatures around 40 for an extended period of time).
•Do not press the buttons using excessive force. This may result in product damage or a malfunction.
•Do not stand or place a heavy object on the seat cover. This may result in product damage or a malfunction.
•Close supervision is necessary when this product is used by children or persons requiring general assistance.
•Use this product for its intended use only, as described in this manual. Do not use attachments not recommended by the manufacturer.
•Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the product to a service center for examination and repair.
•Keep the cord away from heated surfaces.
•Never block the air openings of the product or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, etc.
•Never use the product while sleeping or when drowsy.
•Never drop or insert any object into any opening or hose.
•Do not use the product outdoors or operate where aerosol (spray) products are being used or where it could be exposed to oxygen.
•Connect this product to a properly grounded outlet only. Refer to the Grounding Instructions.
•Unplug this product before filling. Fill (reservoir) with water only unless otherwise specified by the manufacturer. Do not overfill (or specify filling instructions).
save these instructions
4
Safety precautions
CAUTION:
•Do not connect the main water to the hot water pipe. This may result in a malfunction or accident (Make sure to connect it to the cold main water supply pipe).
•After the installation, make sure to check the water supply connections for leaks. Rubber packing should be applied to the connection hose.
•Do not install the air purifier in a location exposed to direct sunlight. This may result in deformation or discoloration.
•Do not open/close the seat cover using excessive force or lean on the cover. This may result in product damage or a malfunction or physical injury.
The seat cover closes/opens slowly using the ‘soft opening/closing’ method.
•Exercise caution that urine does not come into contact with the nozzles, air dryer outlet, or the outside surface of the product. Failing to do so may result in bad odors or malfunctions.
•If the product will not be used for a long period of time, pull the power plug out of the electrical outlet, close the main water supply valve, and drain the water in the water tank.
•Do not pull out the bidet hose or connection hose using excessive force. This may result in a leak or malfunction.
•Pull the power plug out of the electrical outlet before cleaning the unit. Do not splash water directly onto the bidet, or use thinner, benzene, chemicals, or hydrochloric acid detergent. This may result in corrosion to the metal parts or discoloration or scratches to the bidet body.
Use a soft cloth or sponge to clean the bidet.
•This appliance is not intended for use by persons [including children] with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
save these instructions
5
Safety precautions
GROUNDING INSTRUCTIONS
•This product should be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape route (wire) for the electric current. This product is equipped with a cord consisting of a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.
The improper use of the grounding plug can result in electric shock.
•If the repair or replacement of the cord or plug is necessary, do not connect the grounding wire to either flat blade terminal. The insulation wire with an outer green surface with or without yellow stripes is the grounding wire.
•Check with a qualified electrician or service technician if you do not understand the grounding instructions completely, or if in you are in doubt whether the product is properly grounded.
Grounded |
Grounding |
• This product is for use on a nominal 120V circuit, and has a |
Outlet |
Pin |
grounding plug that looks like the plug illustrated in Figure 1. |
|
|
Figure 1 |
Extension cord
If it is necessary to use an extension cord, use only a three wire extension cord with a threeblade grounding plug, and a three-slot receptacle that will accept the plug of the product.
Replace or repair a damaged cord immediately.
save these instructions
6
Part Names
Dimensions
The bidet has the following dimensions.
Do not install the bidet when the dimensions of the bidet differ from those of the toilet.
>> BA13-AR/BR (Round shape)
|
202 mm |
382 mm |
411 mm |
|
(7.9 inch) |
(15 inch) |
(16.2 inch) |
134 mm |
350 mm |
|
|
(5.3 inch) |
(13.8 inch) |
>> BA13-AE/BE (Elongated shape)
|
202 mm |
382 mm |
411 mm |
|
(7.9 inch) |
(15 inch) |
(16.2 inch) |
134 mm |
385 mm |
|
|
(5.3 inch) (15.2 inch)
>> Bottom view >> Distance between fixing holes
140 mm ~ 210 mm |
140 mm ~ 210 mm |
(5.5 ~ 8.3 inch) |
(5.5 ~ 8.3 inch) |
49 mm (1.9 inch)
Rear fixing distance : 164 mm (6.5 inch)
7
Part Names
Front / Rear view
7
8
11
9
10 |
1 |
2 |
3 |
4 |
12 |
13 |
5 |
6 |
14 15
17
16 |
1 |
Seat cover |
10 |
Main water supply valve |
2 |
Warning sticker |
11 |
T-shaped connector |
3 |
IR sensor |
12 |
Power cord |
4 |
Nozzle |
13 |
Product sticker |
5 |
Seat sensor |
14 |
Drain plug |
6 |
Bidet seat |
15 |
Button |
7 |
Water tank hose |
16 |
Installation plate |
8 |
Bidet hose |
17 |
MESH filter |
9 |
Main water supply pipe |
|
|
Remote control
BA13-AR/AE |
BA13-BR/BE |
BA13-A |
BA13-B |
8
Loading...