CounterPath Bria iPhone Edition 2.4.2 User Manual

Download

Page 1

Bria iPhone Edition User Guide

Page 2

CounterPath Corporation

CounterPath Corporation Suite 300, One Bentall Centre 505 Burrard Street, Box 95 Vancouver, BC V7X 1M3

Tel: 604.320.3344 sales@counterpath.com www.counterpath.com

This document contains information proprietary to CounterPath Corporation, and shall not be used for engineering, design, procurement, or manufacture, in whole or in part, without the consent of CounterPath Corporation. The content of this publication is inten de d to demon s trate typ ica l uses an d cap abilities of the Bria iPhone Edition application from CounterPath Corporation. CounterPath makes no warranty regarding the content of this document, including—but not limited to—implied warranties of fitness for any particular purpose. In no case will CounterPath, its employees, officers or directors be liable for any incidental, indirect or otherwise consequential damage or loss that may result after the use of this publication.

CounterPath and the logo are trademarks of CounterPath Corporation. This manual corresponds to Bria iPhone Edition version 2.4.2.

iPhone, iPad, iPod touch and iTunes are registered trademarks of Apple Inc. SILK is a registered trademark of Skype Inc. The Bluetooth word mark, figure mark, and combination mark are all trademarks that are owned by the

Rev 7

Page 3

Content s

About Bria iPhone Edition ...........................................................................................................1

Configuring...................................................................................................................................3

Getting Ready .........................................................................................................................3

Setting up Bria ........................................................................................................................4

Setting up Presence and Instant Messaging............................................................................6

Working with Contacts...........................................................................................................9

Making Phone Calls......................................................................................................................11

Starting and Quitting Bria.......................................................................................................11

Interaction between Bria and Native Phone ...........................................................................12

Placing a Call..........................................................................................................................13

Handling Incoming Calls........................................................................................................15

Handling One Established Call...............................................................................................16

Recording Calls.......................................................................................................................17

Placing a Second Bria Call .....................................................................................................18

Handling Two Established Calls.............................................................................................19

Unattended (Blind) Transfer...................................................................................................20

Attended Transfer ...................................................................................................................21

Conference Call ......................................................................................................................22

Handling Video Calls..............................................................................................................23

Call History.............................................................................................................................25

Accessing Voicemail ..............................................................................................................27

Presence and Instant Messaging ...................................................................................................29

Sending an IM.........................................................................................................................29

Sending an SMS......................................................................................................................31

Receiving an IM and SMS......................................................................................................32

Starting XMPP Group Chat....................................................................................................33

Viewing Others’ Status (Adding a Buddy).............................................................................35

Setting Your Own Status ........................................................................................................38

Responding to Buddy Requests..............................................................................................39

Settings..........................................................................................................................................41

Accounts .................................................................................................................................42

Preferences..............................................................................................................................49

Advanced Settings ..................................................................................................................52

Premium Features ...................................................................................................................57

Share .......................................................................................................................................58

A Troubleshooting........................................................................................................................61

B Dial Plans ..................................................................................................................................63

C Glossary.....................................................................................................................................67

Page 4

CounterPath Corporation

Page 5

Bria iPhone Edition User Guide

1 About Bria iPhone Edition

Bria iPhone Edition is a SIP-based phone for the Apple iPhone™ mobile digital device, and iPod touch™ mobile digital device.

With Bria iPhone Edition (Bria), you can use the Wi-Fi internet connection on your iPhone, or iPod touch to make and receive calls without using mobile data. In addition, with iPhone (but not with iPod touch), you can use the mobile data connection for phone calls when you are not in a Wi-Fi zone.

Standard Telephone Features

Bria iPhone Edition has all the standard telephone features, including:

• Call display and Voicemail Indicator.

• Speakerphone, Mute, and Hold.

• Call history – list of received, missed, and dialed calls.

• Call transfer.

• Audio call record.

• Three-way audio conference.

• Audio codecs G.711, G.722, GSM, iLBC, SILK™, and Opus, with an option to purchase G.729 and AMR-

WB codecs.

• Ringtones and contact avatars.

• Support for DTMF: the ability to enter numbers to use with an auto attendant.

Advanced Features

• Video calls. Must be purchased separately as an in-app purchase.

• Presence and Messaging using the XMPP protocol and the SIP SIMPLE protocol. Must be purchased

separately as an in-app purchase.

• NAT traversal (STUN and ICE).

• Secure call signaling (TLS).

• Audio encryption (SRTP).

• Quality of Service (QoS).

• DNS SRV record lookups.

• Call quality statistics.

• Application diagnostics (logging and log files uploading).

Accessories

The following accessories are supported:

Page 6

CounterPath Corporation

• Headset with microphone (including Bluetooth™): Bria iPhone Edition uses the ear -piece and microphone

on the headset.

• Headphones (no microphone): Bria iPhon e Edi tio n uses the ear-piece on the headphone and the built-in

microphone on the device.

Page 7

Bria iPhone Edition User Guide

2 Configuring

2.1 Getting Ready

1. Once you have installed Bria iPhone Edition, make sure you have set up W i-Fi and mobile data correctly on

your device:

• Set up Wi-Fi: from the main iPhone screen, tap Settings > Wi-Fi. Turn on the Wi-Fi field. The panel will be populated with access points. Tap to choose an access point and wait for the item to show a checkmark (indicating that you are connected).

• Set up mobile data (if applicable): from the main iPhone screen, tap Settings > General > Network, and turn on the Cellular Data field.

2. Set up notifications in order to receive notification when Bria is in the background: from the main iPhone screen, tap Settings > Notifications. Tap Bria and set up the following:

• Notification center (if desired): On to display Bria notifications in the iPhone's notification center.

• Alert Style: Choose how you want to be notified of incoming calls and messages when Bria is in the

background. None to receive no notification.

• Badge App Icon: On to display a number of notifications on the Bria icon.

• Sounds: On to enable the sound preferences you choose on Bria. Off to disable any sound for

notifications while Bria is in the background.

• View in Lock Screen: On to receive notifications when the iPhone is locked.

3. Obtain the following information from your VoIP service provider:

• Your username, password and domain.

• Your auth name (authorization name), if used by your service provider.

• Your voicemail number, if your service provider provides this service.

iPhone

4. Tap the Bria icon on the

5. If prompted, give Bria a permission to access your Contacts on the iPhone. Without the permission, the Bria’s Contacts tab will be empty.

. Bria launches.

Page 8

CounterPath Corporation

Tap +

Complete the User Details section and Voice Mail section (optional) with the information provided by your service provider.

Tap Enabled. The account is registered.

Select your VoIP service provider, if it is on the list. Otherwise, select Userdefined SIP Account.

Tap Save.

Presence and IM is a premium feature. See page 6 for details.

2.2 Setting up Bria

To use Bria as a phone, you need to create a SIP account with the information provided by your VoIP service provider.

When you have successfully registered, tap the Phone tab and try placing a call.

Page 9

Bria iPhone Edition User Guide

Tap

Set up the account in the usual way

Tap Save

Both accounts are enabled and registered

Account status

The Accounts screen reappears

Setting up Multiple Accounts

You can set up more than one account if you have service from more than one VoIP service provider.

Account Status

Status Meaning

The account can be used to make and receive phone calls; see page 14.

The account can only be used to make phone calls; see page 14.

The account is disabled. You can open the account and enable it; it will then automatically register.

Account is enabled but it is not registered. To register, open the account and tap Register. If you do not want to use an account, you should disable it (rather than unregistering). If you leave the

account unregistered (instead of disabled) it will automatically register next time you start Bria. The primary account. This account will be used for calls unless you select a different account when placing

a particular call. See page 14.

Deleting an Account

To delete an account, go to the Accounts list and swipe across the account. The Delete button appears. Tap Delete. (This swipe action is a standard Apple action for revealing the Delete button for any item.)

Page 10

CounterPath Corporation

2.3 Setting up Presence and Instant Messaging

Presence and Messaging is a premium feature available as an in-app purchase. With Presence and Messaging, you can share online status with your buddies (such as Available, Away, On the phone), and exchange instant messages with them.

Bria supports the XMPP protocol and the SIP SIMPLE protocol. Y ou can create an XMPP account on Bria with your Gmail or Facebook credentials to communicate with your buddies. To use a SIP account for Presence and Messaging, make sure your VoIP service provider supports this service for SIP SIMPLE. Texting (sending SMS) to PSTN phone numbers is also available if your VoIP service provider supports this service.

To use the Presence and Instant Messaging feature for XMPP and/or SIP SIMPLE, you need to purchase the feature from the App Store. To do so, go to Settings > Premium Features, an d follow the prompt (see page 57 for details). After the purchase, the IM tab appears at the bottom of Bria Then follow the steps be low, depending on the protocol you want to use.

For XMPP

To use the Pr esence and Messaging feature for XMPP, you need to create an XMPP account with the credentials such as Gmail or Facebook. As soon as your account is connected to a n XMPP server, your buddies appear on your Buddies list.

Page 11

Bria iPhone Edition User Guide

Tap +

Complete the User Details section with the information provided by your service provider.

Tap Enabled. The account is connected.

Tap XMPP

Tap Save.

Account status

Tap Contacts > Buddies to see who is online. To add a new buddy, see page 35.

Account Status

Status Meaning

The account is connected to an XMPP server, and can be used to send and receive instant messages; see page 29.

The account is disabled. You can open the account and enable it; it will then automatically connect.

The account is enabled but it is not connected. T o connect, open the account and tap Connect. If you do not want to use an account, you should disable it (rather than disconnecting). If you leave the

account disconnected (instead of disabled) it will automatically connect next time you start Bria.

Page 12

CounterPath Corporation

Tap to enable.

Tap Unregister to make changes.

Scroll down and tap Account Specific Feature.

Tap Contacts, and add buddies to see other people’s online status (page 36).

Tap Settings > Preferences.

Tap Settings > Accounts, and tap your SIP account.

Tap to enable IM (and SMS if applicable),then tap Register.

Tap Enabled and then Register.

For SIP SIMPLE

To use the Pr esence and Messaging featur e for SIP SIMPLE, you need to change the setting on your SIP account. Then add a new buddy to see other people’s presence (see page 35). If you are new to Bria and have not set up your SIP account for making phone calls yet, it will be easier to set up Bria as a phon e first (see page 4), then follow the steps bel ow.

Page 13

Bria iPhone Edition User Guide

2.4 Working with Contacts

Bria uses contacts saved on your device. Bria’s contacts are continually synchronized with your native contacts; adding, modifying or deleting a contact from one list updates the other list.

On iOS, you can set up multiple sources for contacts (for example, iCloud, Gmail, Exchange, Facebook) and merge all into the native contact app. If you do this, you can access all contacts on Bria as well.

Updating Unified Contacts

When multiple entries are merged into one entry on iOS, modifying a contact within Bria up dates all the contact sources. For example, if you have set up the contacts from iCloud, Gmail, and Exchange and link three entries as one entry on iOS, you will see one single contact on Bria, with unified information from three sources. Editing this contact on Bria updates all three sources of iCloud, Gmail, and Exchange. If you want to update only one source (such as iCloud), use the native Contacts app.

Facebook Contacts

If a Facebook account is connected on the device, Bria shows the most recent post of your Facebook friends on the Contact details page.

The following shows how to merge Facebook contacts and view the posts of your friends on Bria.

Page 14

CounterPath Corporation

All information coming from Facebook will be read-only.

Make sure your device is running iOS 6 or above.

Tap to sign in.

Go to iOS Settings > Facebook.

Follow the prompt.

Leave this On.

Tap to add Facebook Contacts to your device.

Enter your credentials.

You do not need to install the Facebook app.

Start Bria, and go to the Contacts tab. You will see your Facebook friends. Tap one of them, then Bria accesses your Facebook account to retrieve the most recent post of this friend. Tap OK to allow.

The entries with the same name will be merged into one entry.

Tapping IM allows you to start chatting with this person if you set up an XMPP account with Facebook credentials.

Tapping the arrow takes you to the contact details page (shown on the left) and updates the friend’s status message.

If you tap this, Bria does not access your Facebook account. You can change this permission from iOS Settings > Facebook, then turn on/off for Bria.

Page 15

3 Making Phone Calls

This message appears if you did not enable mobile data (3G/4G) and you do not have a Wi-Fi connection. Use of moble data is optional; to turn it on go to Settings > Preferences.

“No Service“ means that the device does not have Wi-FI or mobile data network, or that Bria is not allowed to use data for SIP. Go to Settings > Preferences to allow Bria to use data. “No Registration“ means that the SIP account is not registered/enabled. Go to Settings > Accounts and enable the account.

3.1 Starting and Quitting Bria

Start Bria. After a few seconds, the message “Phone Ready” appears. Bria is ready.

Bria iPhone Edition User Guide

Quitting

Double-tap the Home button on the the red icon appears. Tap the red icon to close the application.

iPhone

. The list of active applications appears. Long -tap th e Bria ico n until

Page 16

CounterPath Corporation

3.2 Interaction between Bria and Native Phone

Placing Calls

• You can place a Bria call so long as you are not already on a native call or not already on two Bria calls.

• You can place a native call regardless of the state of Bria.

Incoming Calls

• An incoming Bria call rings on your phone unless you are on a native call or you are already on two Bria calls. In both these cases, the new incoming call will go to Bria voicemail instead.

• Incoming native calls: Being on a Bria call has no impact on your native phone: native calls will be received in the usual way. Therefore, you should be prepared to accept or decline a native call.

Established Calls

• If you already have an existing Bria call and you receive an incoming native call, you will not be able to hear the other party on the existing Bria call until you answer or decline the incoming native call.

• If you accept an incoming native call, any live Bria call goes on hold. You will not be able to take the Bria call off hold until you end the native call.

• You can have up to two Bria calls established at the same time and switch between them.

Page 17

3.3 Placing a Call

Backspace

Clear the entire entry

Enter the phone number

Tap

Tap Call

Tap the Contacts tab at the bottom of the screen

Search for the contact and tap it

Tap the desired phone number

If phone numbers from your contact list need to be modified (for example, to remove extra characters such as +), you can set up a dial plan. See page 63.

A prompt appears for you to confirm the call. Or the call starts immediately. To select the desired behavior, see “Single Touch to Call” on page 50.

Using the Dialpad

Bria iPhone Edition User Guide

From the iPhone Contact List

Page 18

CounterPath Corporation

To select the account, tap

Tap the account you want to use

The new selection

The current account

The “network quality issues” Message

This message appears if there is network congestion or a poor quality Wi-Fi signal. Try moving closer to your Wi-Fi access point.

Making a Call from another Account

If you have more than one account enabled, you can change the account to use on a given phone call.

Page 19

3.4 Handling Incoming Calls

This is the account number; it appears only if you have more than one account enabled (page 5). It tells you which account the call is coming in on

Tap Decline or Answer

Tap to answer a call.

If you tap Close, the incoming call will continue to ring until your voicemail picks it up or the other person hangs up.

The call starts immediately. You can change this behavior; see “Alert Answer” on page 50.

Alert style

Banner style

When Bria Is in the Foreground

Bria iPhone Edition User Guide

When Bria Is in the Background

You will get a notification for an incoming call. Make sure you set the Alert style to Alerts or Banners by tapping the Home button > Settings > Notifications > Bria.

Page 20

CounterPath Corporation

Quick tap to turn on/ off Speakerphone. Long tap to choose other audio output options (if connected).

Mute or unmute

Hold or release hold

Place a second phone call

Tap to show a keypad in order to enter numbers, for example, when choosing menu items such as “enter 1 for customer support”

Tap to record (page 17), transfer this call (page 20), or send SMS (page 31).

Tap to return to the native call. The Bria will be put on hold

Although there are two calls, only one is a Bria call. So you could start another Bria call.

3.5 Handling One Established Call

Handling a Bria Call and a Native Call

Page 21

3.6 Recording Calls

Tap More, then tap Start Recording

Tap More, then tap Stop Recording

Recording indicator

Y ou can pause recording by stopping recording and then starting again. Both recording sessions are saved in one file.

Recording also stops automatically when you end the call

Tap

Indicates this call was recorded

Tap

Bria iPhone Edition User Guide

Listen to the recording on the History screen.

You can also manage the recording in iTunes®. Select your device, click the Apps tab at the top of the screen, scroll down to file sharing, then click the Bria icon in the Apps panel. The recordings appear in the Bria Documents panel.

Page 22

CounterPath Corporation

Or tap here to go back to the first call

To switch to the other person, tap Swap Calls

Place the call on hold, if desired

Tap Add Call

Dial the number of the second person and tap Call

When the call connects, the first call is put on hold. You are now speaking to the second person.

Or tap here to go back to the first call

To switch to the other person, tap Swap Calls

Place the call on hold, if desired

Tap Add Call

Tap Contacts

When the call connects, the first call is put on hold. You are now speaking to the second person.

Search for the person and tap the phone number

Tap Call

3.7 Placing a Second Bria Call

Using the Dialpad

From the iPhone Contact List

Page 23

3.8 Handling Two Established Calls

To switch to the other person, tap Swap Calls

Handling Two Bria Calls

Bria iPhone Edition User Guide

Page 24

CounterPath Corporation

If necessary, tap Phone to display the Dialpad

Tap Transfer

Tap More

Type the number to transfer to

Tap Xfer

After a few seconds, the transfer is completed

Tap More

If necessary, tap Contacts

Tap Transfer

Search for and tap the contact and tap the phone number

3.9 Unattended (Blind) Transfer

You can transfer the current Bria call to a second person without first talking to that second person.

Using the Dialpad

By Selecting a Contact

Page 25

3.10 Attended Transfer

You know there are two calls established because the Swap Calls button is showing.

Tap More

Establish two calls (page 18)

When ready, tap Transfer to. The live call is transfered to the on-hold call.

You can speak to the second person first then transfer the first person to them.

Bria iPhone Edition User Guide

Page 26

CounterPath Corporation

You know there are two calls established because the Swap Calls button is showing.

Tap Merge

Establish two calls (page 18)

The two calls are merged into a conference

Clicking End Call ends the conference and hangs up on both calls

If desired you can split the conference back into two calls

3.11 Conference Call

When you have two Bria calls established, you can merge the calls into a three-way conference call.

Page 27

Bria iPhone Edition User Guide

Tap to stop sending your video.

Tap Video.

Go to Contacts, and tap a softphone number.

You

Bria starts sending your video as soon as the other party accepts your video call.

Tap to switch to a rear camera.

To hold, mute, or transfer, swipe the screen to the right.

During a call, swipe the screen to the left.

Or, tap more, then Add Video.

Bria starts initializing video. You will see the other party’s video

after they add video on their end.

3.12 Handling Video Calls

To use video on Bria, the Video Calls premium feature must be purchased (see page 57).

Placing a Video Call

Adding Video during an Audio Call

When you place a call using Dialpad, Bria makes an audio call. You can add video to the audio call .

Page 28

CounterPath Corporation

Receiving a Video Call

When the other party places a video call, you will see their video on Bria after you answer the call.

• You can start sending your video if desired by tapping the Send icon.

• If you do not want to receive the other party’s video during a call, swipe the screen to the right, and tap more > Remove Video. The call will be switched to an audio call.

During a Video Call

During a video call, you can:

• transfer a video call. The transferred call will be place d as an audio call, a nd then both parties can add video to the audio call.

• establish two video calls and merge them int o an audio conferernce call (no video conference call support ed yet).

• record only audio of video calls.

Page 29

3.13 Call History

Tap to filter, as desired

Missed calls

Outgoing calls

Incoming calls

Tap to confirm

Tap to clear the current view. For example, clear only outgoing calls

Tap the History icon at the bottom of the screen.

Bria iPhone Edition User Guide

Clearing the History

Page 30

CounterPath Corporation

If you tap Create, the New Contact screen appears with the number already entered. Complete the other fields.

Tap the arrow icon

Tap Create New Contact or Add to Existing Contact

Or if you tap Add, the contact list appears. Tap the contact where you want to add this number. The contact is immediately updated.

The account the call came in on

Creating a Contact from History

You can create a contact from a history item.

Page 31

Bria iPhone Edition User Guide

The voicemail indicator on the Bria screen

The voicemail indicator on the iPhone home screen

Tap the voicemail icon; the voicemail number appears in the entry field. Place the call in the regular way.

(If no number appears, you have not set it up in settings; see page 42.)

3.14 Accessing Voicemail

If your VoIP service provider provides a voicemail service, then incoming calls go to voicemail if:

• Bria is not running.

• You already have two calls established

Page 32

CounterPath Corporation

Page 33

Bria iPhone Edition User Guide

Tap IM.

Tap a conversation.

Or tap to select a buddy.

Or tap More to choose the predefined messages.

You can also call this person if this person provides a phone number. SIP is used to make calls.

Type a message. To move to the next line, tap More, and then tap <next line>.

Tap Send.

4 Presence and Instant Messaging

With Presence and Instant Messaging, you can share your online status (presence) and exchange instant messages with the contacts who have a softphone number or an XMPP ad dress. You can also send an SMS from a SIP account to PSTN mobile phone numbers if your VoIP service provider supports this feature.

Presence and Instant Messaging is available as an in-app purchase. Make sure your VoIP service provider supports SIP SIMPLE before purchasing this option if you pl an to use this feature over SIP SIMPLE. To purchase this option and set up your Bria, see page 57.

4.1 Sending an IM

You can send an instant message to your buddy who is online. If you have no buddies, add someone as a buddy first (page 35).

Page 34

CounterPath Corporation

Tap Contacts.

T ap Buddies and select a buddy.

Type a message.

Tap to send an IM.

An XMPP account

A SIP account

Tap Send.

By Selecting a Contact

Page 35

Bria iPhone Edition User Guide

Tap IM.

Tap a conversation.

Type phone numbers or names of your contacts.

Tap to select numbers from the Contacts .

Tap SMS.

Type a message, and tap Send.

Tap Contacts.

Tap.

Tap a phone number.

Search for and tap the contact.

Type a message, and tap Send.

4.2 Sending an SMS

You can send an SMS from your SIP account to mobile phone numbers if your VoIP service provider supports this feature. Before sending an SMS, make sure SMS is enabled (ON) on Preferences and on your SIP account.

By Selecting a Contact

Page 36

CounterPath Corporation

Tap.

When Bria is in the background

Tap to see the message.

A new message appears on the top.

To hide the actual message on alert/ banner, turn on “Private When Locked“ under Preferences.

4.3 Receiving an IM and SMS

An alert comes up when you receive an IM or SMS.

Page 37

Bria iPhone Edition User Guide

The green chat icon inducates the group chat room is active.

Tap a conversation to send messages and see chat history.

If a room appears with No Participants and a green icon, that means you are the last person in the chat room; the room will be closed when you leave.

Your messages appear on the right.

T ap Details and then their name to view the contact detail.

Names of current participants.

Tap the Messages tab, then tap IM.

You can copy a message to the device’s clipboard by a long-tap on a message.

4.4 Starting XMPP Group Chat

You can host a group chat using your XMPP account on Bria when the following requirements are met:

• Your XMPP server must support Multi User Chat extension as defined in XEP-0045.

• All the clients must support XEP-0045. For example, users with the previous version o f the app cann ot joi n a chat room.

• All the users must connect to the same XMPP server; in other words their XMPP accounts must have the same domain.

How it Works

In a group chat, multiple participants can share messages. When a host starts a group chat, an invitation message is sent to all the selected buddies. The buddies join the chat ei ther automatica lly or after acc epting the invitation depending on the client they are using. If a buddy is offline or declines the invitation, the buddy will not be placed into the group chat.

Once a group chat becomes available, the chat remains active until everyone lea ve s the chat. The participants including the host can le ave the chat and come back later if the chat is still active. If there are undelivered messages, Bria will download the messages from the XMPP server and display them in chat history. The chat history will be saved locally on Bria so that the user can look at it even when the XMPP account is unregistered.

Page 38

CounterPath Corporation

Tap IM/Messges, then IM.

Tap the icon to select a buddy.

Tap + to add more buddies.

Type an invitation message.

Tap the Send button.

A long-tap on a buddy allows you to remove the person. You cannot remove anyone once you send the invitation message.

You will see messages when they join or leave the room.

Starting a Group Chat

You can invite up to 10 XMPP buddies; 11 people maximum in one chat including you.

• Buddies must be online (registered to the XMPP server); if their accounts are unregistered, they will not receive your invitation and therefore cannot join the group chat.

• Once a group chat is held with participants, you cannot add more buddies or remove some of the participants.

Joining a Group Chat

You might get invited to a group chat. On Bria, the invi tatio n message will co me in to your XMPP acc ount as a regular message. As soon as you receive the message, you are automatically placed into the group chat.

Leaving a Group Chat

Unregistering your XMPP account lets you leave all the active group chats. Deleting a group chat on the IM/Message s tab also let s you leave the chat , but you will not be able to c ome back

to the chat or view the chat history.

Page 39

Bria iPhone Edition User Guide

Tap.

Tap Buddies, then tap +.

Select an account if prompted.

Enter a username, then tap Done. Your buddy apppears in your Buddies list.

4.5 Viewing Others’ Status (Adding a Buddy)

T o view someone’ s online status, you need to add this person as a buddy. A buddy must have an XMPP address or a softphone number. An XMPP address and a softphone number are typically a username. For XMPP accounts, your buddies are stored in an XMPP server, not in your local iPhone contacts. This means the name and presence of your buddies appear in your Buddies list (not in Al l Contacts) while your XMPP account is connected. For SIP accounts, your buddies are stored in your local iPhone contacts.

XMPP Accounts

Make sure that your XMPP account is ON (connected to an XMPP server). When you add a buddy, Bria sends a buddy request to the buddy. You will see the person’s status after the person accepts your buddy request. If the person declines the request, the person will remain in the your buddies list with Blocked status. Y ou can re-send a buddy request to the person by tapping Unblock Buddy on the buddy profile screen.

Page 40

CounterPath Corporation

Tap.

Search for the contact and tap it.

Enter a softphone number, such as

1440. The domain name will be populated.

Tap the arrow in im uri.

Tap a softphone number, and tap Done.

Tap Edit.

The person appears both in your Contacts and Buddies lists.

SIP Accounts

To see someone’s online status, you can either add a new contact as a buddy, or edit an existing contact.

Editing an existing contact to see online status

Page 41

Adding a new contact as a buddy

Tap.

Tap Buddies, then tap +.

Select an SIP account if prompted.

Enter a name and softphone number.

Tap the arrow in im uri.

Tap a softphone number, and tap Done. The person appears both in your Contacts and Buddies lists.

Bria iPhone Edition User Guide

Page 42

CounterPath Corporation

Tap.

Your contacts will see your status and custom note.

Your current status. Tap to change.

Tap a status.

Write a note to publish if you want.

4.6 Setting Your Own Status

When you start Bria, your online status becomes “Available”. When you make or receive a phone call, Bria automatically updates your status to “On The Phone” if your online status is “Available” and no custom status note is specified. You can change your status from “Available” to other statuses such as “Busy” or “Away”. Once you change your status from “Available” or specify a custom status note, your status will remain as specified until you switch yourself.

Presence

Status Meaning

Available

Away

Busy

On The Phone

Do Not Disturb

Appear Offline

People can call you and send you an IM. If no custom status note is specified, Bria automatically switches “Available” to “On The Phone” when you make or receive calls.

People can call you and send you an IM.

When you make or receive phone calls, Bria automatically updates your status to “On The Phone” if your status is “Available“ and no custom note is specified. When your call finishes, your status goes back to “Available“.

While you are on the phone, you can still send and receive IMs. No one can call you; the call fails and your call history shows a missed call. Your buddies can send

you IM; an alert comes up on the IM tab without any sound. You are able to see presence of your buddies, but your buddies see you as offline. You will actually

receive phone calls and IMs if your buddies do contact you; they are unlikely to do so because your buddies cannot tell the difference between “Appear Offline“ and you really being offline.

Page 43

Bria iPhone Edition User Guide

An alert comes up. Tap.

This person wants to see your online status.

Tap to set a display name.

Tap a desired option.

4.7 Responding to Buddy Requests

When using an XMPP account, you may receive a buddy request. You must respond to the request. You have three options.

• Accept: you let the other person see your online status. At the same time, the buddy request will be automatically sent from your Bria to this person, and you will see this person’s status in your buddies list.

• Decline: the person will not see your online status. You will not see this person on your Buddies list either.

• Ignore: the person will not see your online status. The buddy request may appear in this session or in a future sesson.

end registers your softphone number on the client, the person will see your presence without your acceptance. Similarily, you will see someone’s presence right away without having to wait for the person’s response.

When using a SIP account for presence, you will not recei ve a buddy request. As soon as th e person on the other

Page 44

CounterPath Corporation

Page 45

5Settings

Bria iPhone Edition User Guide

Page 46

CounterPath Corporation

5.1 Accounts

All the fields on this screen must be supplied by your VoIP service provider.

SIP Accounts

To change these fields on an existing account, you must first unregister the account or turn Enabled off for the account.

Top Half of Screen Bottom Half of Screen

Field Description

Account Name Change the name as desired. For example, “business account” Enabled Typically On, in order to use the account for calls. Display as Your name. This will be your Caller ID if supported. Username Typically the account number for the account. Provided by your VoIP service provider.

Do not enter a domain name here. Password Provided by your VoIP service provider. Domain Provided by your VoIP service provider. VM Number The number to dial to connect to voicemail and check messages. Provided by your VoIP

service provider. If there is a number in this field, tapping the VM icon on the keypad

will display the voicemail number; see page 27. Dial Plan Optional. See page 63. Account Specific Features See below. Account Advanced See below.

Page 47

Account Specific Features

Bria iPhone Edition User Guide

Top Half of Screen Bottom Half of the Screen

Field Description

Disable Mobile Data If you have multiple accounts and want to use mobile data only on some of the accounts, turn this

Disable VoIP Calls If you have multiple SIP accounts and want to allow VoIP Calls over the mobile network only on

Enable Video ON to make video calls on this SIP account. To use this feature, you must purchase “Video Calls”, and

Always Offer Video ON to always dial a number with video offer. Whether you use the keypad, the Contacts tab, or the

Auto Send Video When On, Bria automatically starts sending video when you receive video calls. When Off, video

Auto Speaker On Usually ON. This setting applies to iPhone only. While headsets/Bluetooth are connected to Bria, the

Enable IM & Presence ON to share your online status with and send instant messages to your buddies. To use this feature,

Presence Agent Turn ON only if your VoIP service provider supports this service for SIP SIMPLE. Publish Refresh Interval for publishing your status over SIP SIMPLE. Value in seconds. Minimum 30, default 900.

setting on for the account you do not want to use data. This setting appears only when “Use When Available” is enabled under Preferences.

• When ON, no mobile data will be used; this account does not register with SIP service when Bria is in the mobile network. You will get no messages or notifications on this SIP account when Wi-Fi is not available. You also will not be able to place or receive calls without Wi-Fi.

• When OFF, Bria will attempt to connect to SIP service using mobile data.

some of the accounts, turn this setting on for the account you do not want to allow VoIP calls. This setting appears only when “Allow VoIP calls” is enabled under Preferences and “Disable Mobile Data” is OFF (You need to allow Bria to use mobile data in order to place/receive VoIP calls).

• When ON, no VoIP calls will be made on this SIP account when Wi-Fi is not available.

• When OFF, VoIP calls will be made on this SIP account.

enable video on Preferences . See page57 for purchasing the feature.

History tab, all the outgoing calls will offer video to the other party. The default is Off.

does not start until you tap Send on the video screen. The default is Off.

sound always comes from headsets/Bluetooth regardless of this setting. This setting could solve a problem that audio calls are treated as video calls (thus the speaker comes

on automatically). Turning this setting off allows you to hear the sound from the earpiece.

you must purchase “Presence and Messaging” from the App Store. See page 57.

Page 48

CounterPath Corporation

Field Description

Subscribe Refresh Interval for subscribing your buddy’s status over SIP SIMPLE. Value in seconds. Minimum 30,

default 900.

Enable SMS ON to send an SMS to PSTN cell phone numbers by using the SIP SIMPLE protocol. T urn ON if your

VoIP service provider supports this feature. The purchase of “Presence and Messaging” is required to use this feature.

Split Long Messages This sett ing contro ls wh o will split a long SMS - either the client side or the server side. You can type

long messages on Bria regardless of this setting. The default is off (server side). Turn this on if your SIP server does not accept/split long SMS.

• when on, Bria splits a long message to multiple SMS (140 characters per one SMS), and sends them to the SIP server.

• when off, Bria sends a long message to the server and lets the server split it to multiple SMS.

Account Advanced (SIP)

Top of Screen Middle of Screen Bottom of the Screen

Field Description

Out. Proxy If your VoIP service provider has an outbound proxy and requires that you provide that address to

Auth Name May not be required. But if it is required, it will be provided by your VoIP service provider. Send DTMF using The method used for DTMF, sent when you press a number key when dealing with an auto

Bria, enter the domain name or the IP address obtained from your provider.

attendant (such as “press 1 for customer service other two methods.

Choose a method specified by your VoIP service provider.

”). In-band DTMF can be sent in addition to the

Page 49

Bria iPhone Edition User Guide

Field Description

Suppress STUN Wi-Fi Allows you to control the use of STUN per account.

• ON: No STUN is used on this particular account. This setting overwrites the STUN Wi-Fi setting under Advanced Settings (which applies to all accounts); when Suppress STUN Wi-Fi is ON, no STUN is used on this particular account even if STUN is enabled under Advanced Settings.

• OFF (default): Bria decides whether to use STUN or not depending on the STUN Wi-Fi setting under Advanced Settings.

Suppress STUN Mobile This setting has the same function as Suppress STUN Wi-Fi, but applies only when you are

connected over the mobile network.

Use ICE Wi-Fi ICE is involved only in media routing (it is not involved in SIP signaling).

ON: Bria will use ICE to discover addresses for media packets. ICE provides a good guarantee of two-way audio. However, to use ICE successfully, both endpoints in a call must use ICE and specifically must use draft 19 of the ICE standard.

OFF: Try turning ICE off if you are not using iPhone behind a firewall or NAT.

Use ICE Mobile This setting has the same function as ICE Wi-Fi, but applies only when you are connected over

Global IP Wi-Fi • ON (default): Bria will publish its public IP address at the signaling level. The public address

Global IP Mobile This setting has the same functionality as Global IP Wi-Fi, but applies only when you are

Use Tel URI Change this value only if advised to do so by your VoIP service provider.

SIP Transport Tap to display the choices. Contact your VoIP service provider to identify the types of transport

Encrypt Audio If the transport is set to TLS, you can encrypt a phone call at the media (audio) level:

Incoming Calls Typically ON, in order to receive calls. If OFF, you will not be able to receive calls using Bria. Wi-Fi Refresh Interval The timer interval between Bria’s attempts to register in order to refresh the account registration.

Mobile Refresh Interval This setting has the same function as Wi-Fi Refresh Interval, but applies to registrations made

Keep Alive - Wi-Fi Interval A “keep alive” message is a mechanism for maintaining a “pinhole” through your firewall so that

the mobile network.

may not work with some NATs or firewalls.

• OFF: Bria will publish its private IP address at the signaling level.

"Off" represents server-based network traversal, "On" app-based.

connected over the mobile network. If you set this setting to ON, you must also set Global IP Wi-Fi to ON.

• ON: Prefix SIP URIs with tel://

• OFF (default): Prefix SIP URIs with sip://

that are supported.

• UDP and TCP do not support signal encryption.

• TLS does support signal encryption. If TLS is selected, a given call will be encrypted if the other person also uses TLS. You may also need to install a certificate on your iPhone; speak to your VoIP service provider.

• Never: Audio is not encrypted.

• If Possible: On a given call, audio will be encrypted if the other person supports and is also using audio encryption. If not, audio will not be encrypted.

• Always: Audio will always be encrypted. The call will fail if the other person cannot accept encrypted calls.

This value is placed in the “Expires Change this value only if advised to do so by your VoIP service provider.

over the mobile data network.

the account registration is maintained. The interval specifies how often the message is sent (in seconds).

If you are experiencing problems (for example, accounts become unregistered when using a WiFi connection), try setting this interval to a lower number such as 20.

” header field of the SIP REGISTER message.

Page 50

CounterPath Corporation

Field Description

Keep Alive - Mobile Interval Same as above, except the interval applies to registrations made over the mobile data network,

which can be made on an iPhone (but not an iPod) when you are not in a Wi-Fi zone.

Single Register Applies only if Global IP is ON.

• ON (default): Bria will register using a single register request.

• OFF: Bria will register using an unregister and a register.

Passive Session Timer Controls the use of session timers on SIP accounts. The session timer is used to determine if the

call is still active. Only choose Off if advised by your VoIP service provider.

• ON (default): Bria will not use session timers in any session, except it is explicitly required by the remote party.

• OFF: Bria will use session timers in all sessions whenever the remote party supports and uses it.

Connection Reuse • ON: Bria uses existing connections by including an “ob“ parameter in a header as defined in

RFC5626.

• OFF: Bria does not reuse existing connections.

Changing this setting might solve problems with dropping or holding calls. The default is On.

Enable IMS When ON, Bria supports the IP Multimedia Subsystem. The default is Off. Subject to VoIP

service provider. Only choose ON if advised by your VoIP service provider.

XMPP Accounts

To change these fields on an existing account, you must first disconnect the account or turn Enabled off for the account.

Field Description

Account Name Change the name as desired. For example, “Gmail”. Enabled Typically On, in order to use the account for messages and presence. Username The XMPP user ID. Password Password for the XMPP user ID. Domain Domain of the XMPP service. For example, “gmail.com”. Account Specific Features See below.

Page 51

Field Description

Account Advanced See below.

Account Specific Features (XMPP)

Bria iPhone Edition User Guide

Field Description

Disable Mobile Data If you have multiple accounts and want to use mobile data on only some of the accounts, turn this

setting on for the account you do not want to use data. This setting appears only when “Use When Available” is enabled under Preferences.

• When ON, no mobile data will be used; therefore you will get no messages or notifications on this XMPP account when Wi-Fi is not available.

• When OFF, mobile data will be used for this XMPP account when Wi-Fi is not available.

Account Advanced (XMPP)

Field Description

Out. Proxy If your XMPP service provider has an outbound proxy and requires that you provide that address

to Bria, enter the domain name or the IP address obtained from your provider.

Page 52

CounterPath Corporation

Field Description

Resource Used to identify an XMPP session when you log in to multiple clients with this XMPP account

(for example, /work or /home). Priority The priority of the resource. The range is from -128 to 127. Use Ping ON to send ping messages to the XMPP server to indicate that the connection is active. Interval Specifies how often the ping message is sent to the server (in seconds). The default is 300.

Page 53

Bria iPhone Edition User Guide

5.2 Preferences

Top of the Screen Middle of the Screen Middle of the Screen

Middle of the Screen (Messaging) Bottom of the Screen (Video)

Field Description

Use When Available Appears only on iPhone.

• ON: When a Wi-Fi connection is not available, Bria will attempt to connect to SIP/ XMPP services using the mobile data network. Data charges with your mobile carrier will apply. You will be able to receive messages and voice mail notifications when Bria is in the mobile data network. Y ou will also have a choice to allow/disallow VoIP calls using a separate setting "Allow VoIP Calls".

• OFF: When a Wi-Fi connection is not available, SIP and XMPP services will be unregistered; you will get no messages or notifications. "Allow VoIP Calls" is OFF; you will not be able to place or receive calls either.

Page 54

CounterPath Corporation

Field Description

Allow VoIP Calls Appears only on iPhone. "Use When Available" must be ON to use this setting.

• ON: When a Wi-Fi connection is not available, Bria will attempt to place calls using the mobile data channel. Data charges with your mobile carrier will apply. If you turn this setting on, we recommend you purchase the G.729 codec (page 57) because it provides better audio quality on mobile data calls (3G/4G).

• OFF: When a Wi-Fi connection is not available, you will not be able to place or receive calls.

Run In Background • ON: If using UDP for transport (page 45).

• OFF: If using TCP or TLS for transport.

This setting lets you receive calls when Bria is running in background and your transport is UDP. Turning this setting on decreases battery life. But if it is turned off, you will not be able to receive calls if you are using UDP.

If you are using TCP or TLS, there is no need to turn this setting on.

Custom Colors You can change the color of various parts of the screen. This setting includes a Reset

button, so you can easily return to the defaults. Play Ringtone ON to hear the ringtone. Vibrate ON to vibrate when you receive a call. Alert Answer Controls the behavior of the incoming VoIP call prompt (when Bria is in the

background):

• ON: You can immediately answer the incoming call.

• OFF: You can view the incoming call screen, and then choose either answer or decline the call.

Alert Missed Controls the behavior of the missed call prompt (when you receive a call when Bria is in

the background):

• ON: A Missed Call alert appears on the native iPhone screen.

• OFF: No alert appears.

Ringtone The ringtone for incoming calls. Background Image The background image that appears when you are on a call. Swipe the image to delete. Contact Image ON to display the image of your contact while receiving or making calls. Auto Record Calls ON to automatically record all the calls made with Bria. When Off, Bria records a call

only if you tap Start Recording during a call.

Single Touch to Call ON: When making a call from Contacts or History, the call will be placed as soon as you

tap a phone number. I f SMS and/or video is enabled, you will see a prompt to choose an option.

OFF: When you tap the phone number, a prompt appears. When you tap that prompt, the call will be placed.

Show URI Domain ON: The phone number displayed for an incoming, outgoing or established call will

include the domain name (for example, 1234@myVoipProvider.com). OFF (default): The domain name is not included in the display.

Forward Calls ON to send all incoming calls to a specific number. So long as Bria is enabled and

registered and Run In Background (above) is ON, incoming calls will be forwarded to this phone number.

To Number The number to forward calls to, when Forward Calls is ON.

Page 55

Bria iPhone Edition User Guide

Field Description

Enable IM & Presence The Messaging section appears after you purchase the “Presence and Messaging”

feature. ON (default) to allow your Bria to be used for sending instant messages and sharing

online status with your buddies. To use this service, you also need to enable the feature on the Account screen.

If OFF , all the SIP and XMPP accounts on your Bria will never be used for presence and messaging.

Enable SMS ON to allow your Bria to be used for sending SMS. To use this feature, you also need to

enable SMS on your SIP account.

If OFF (default), all the SIP accounts on your Bria will never be used for sending SMS. View Style Choose a view of the instant message screen. Plain or Bubbles (default). Alert Sound ON to play a ringtone when you receive a new message. Alert Vibration ON to vibrate when you receive a new message. Private When Locked On to hide the actual content of an incoming message on the Lock screen as well as the

notification center. The default is off. Alert Text Tone The ringtone for incoming messages. Enable Video ON to make video calls on Bria. Appears only after the “Video Calls“ feature is

purchased. See page 57. Send Landscape When ON, your video will be forcibly sent in the landscape orientation. This is a

compatibility mode for older devices that cannot render video in the portrait orientation.

Use as an exception. The default is "Off". Video Quality • Automatic: Recommended. Let Bria select the best qua lity to use in a given situa tion.

• Lower (QCIF): Quarter Common Intermediate Format uses 176 horizontal pixels and 144 vertical lines. QCIF transfers one fourth the amount of data; therefore it consumes less memory than CIF.

• Higher (CIF): Common Intermediate Format uses 352 horizontal pixels and 288 vertical lines.

Page 56

CounterPath Corporation

5.3 Advanced Settings

Top of Screen Middle of Screen Bottom of Screen

If you make changes to the fields identified by a , yo u must tap the Apply Changes button at the bottom of the screen or restart Bria.

Field Description

Network Traversal Strategy Tap to display the choices; see below. Use VPN If Active If you are using Bria with a VPN connection to your network, set this field to ON, to

force Bria to select the VPN network interface. If you are not using a VPN, set to OFF (default). Only set this field to ON if you are using a VPN connection, otherwise the wrong

network interface may be selected, resulting in registration problems.

Voice Activity Detection • ON: audio is not transmitted when no one is speaking. Turning this feature on may

reduce bandwidth usage.

• OFF (default): audio is transmitted when no one is speaking.

Noise Reduction Tx Noise Reduction. When ON, Bria attempts to reduce background noise on audio you are

transmitting (sending to the other person). Not used on iPhone 4 and 4S. The default is OFF.

Noise Reduction Rx Noise Reduction. When ON, Bria attempts to reduce background noise on audio you are

receiving from the other person. The default is OFF.

Quality of Service If desired, ask your VoIP service provider if QoS is supported. QoS (Quality of Service)

can allow your phone calls to be given a higher priority on the network. The default is OFF.

Codecs Variable Bitrate This setting applies when the negotiated codec is AMR-WB, SILK, Opus or H.264 (for

video call). When this setting is turned on, Bria dynamically adjusts the bitrate throughout the call,

based on the current network conditions. For example, when Bria detects many packets are lost, it tries to lower the bitrate (within the range of a bitrate supported by a specific codec), in order to ensure the best possible quality under the circumstance.

We recommend that you leave this setting ON, especially when AMR-WB, SILK, Opus or H.264 is enabled.

If you notice degradation in audio or video quality when your data connection is stable, you can turn this setting off to see if it makes a difference.

Page 57

Bria iPhone Edition User Guide

Field Description

RTP Port Start Change this value only if advised to do so by your VoIP service provider.

This indicates the start of the ports range used for RTP and RTCP sessions. The range is

100 ports wide. The range is not observed if ICE is used. The default is 4000. Audio Codecs Selection Tap to display more information about these two fields. See page 55. Video Codecs Selection Appears after the Video Calls premium feature is purchased. See page 56. Verify TLS Cert Applies only if you use TLS as the transport.

• On (default): Bria attempts to verify the certificate, sent by the SIP server, to see if it is trusted. For the certificate to be trusted, a corresponding CA certificate, provided by your VoIP provider, must be installed on your device (using the iPhone Configuration Utility for example).

• Off: Bria accepts the certificate without attempting to verify it.

Alert In Background • On: Bria sends notifications when an account fails to register. Bria also notifies the

user after the account is successfully re-registered. Make sure that Bria notifications are enabled under iOS Settings.

• Off (default): Bria does not send notifications regarding account registration errors.

Enable RPort • On: the outgoing INVITE message will have an RPort parameter inside the Via

header, which indicates that Bria supports RFC 3581. If the server also supports RFC 3581, the server should respond with the RPort parameter set to the incoming public IP port and the received parameter set to the public IP address. This is the default behavior in previous Bria versions.

• Off: Bria does not have the RPort parameter in the Via header.

Enable PRACK • On: Bria advertises that it supports “100rel” and allows PRACK, as defined in RFC

3262. The outgoing INVITE message will have “100rel” in the Supported header and “PRACK” in the Allow header. This is the default behavior in previous Bria versions.

• Off: Bria will not advertise these features; there will be no “100rel” in the Supported header.

Encode # in URI • On (default): Bria escapes a hash character (#) used in the user part of SIP URI, as

required by RFC 3261.

• Off: Bria does not escape a hash character and sends it as is. Turn this setting of f if you are having trouble making outgoing calls to a number with a hash character.

SDP Port Switching Controls Bria's behaivor to choose the RTP port to send RTP traffic to.

• When ON (default), Bria switches the RTP port when it realizes the remote party is sending data from a different port.

• When OFF , Bria does not switch the port and keeps using the original one specified in the SDP body .

Verbose Logging Leave this setting OFF unless customer support instructs you to turn it ON in order to

troubleshoot a problem you are having on your device. See page 61. Send Log Tap to upload the current log to customer support. See page 61. Call Statistics To show detailed information about the current/last call. For example, the number of

packets lost.

For an ongoing call, the statistics information refreshes every second. Tapping the

Refresh button stops auto refresh and presents you with a snapshot of the most current

statistics. To enable auto refresh again, either long-tap the Refresh button, or leave the

statistics page and come back again.

Page 58

CounterPath Corporation

Network Traversal Strategy

Select a profile:

• Application Managed: STUN ON and DNS SRV ON. Bria will use the specified STUN server to discover the public address of your

device. It will present your public address for SIP signaling. When negotiating media routing, it will present either both your public and private addresses or just your public address depending on the ICE settings under Account Advanced .

• Server Managed: STUN OFF and DNS SRV ON. Bria will present your device’s private address for SIP signaling and when

negotiating media routing. Choose this option if your VoIP service provider advises you that it has implemented a network-hosted NAT traversal (or farend NAT traversal) technology such as a session border controller (SBC), media proxy or RTP relay.

• Custom Configuration: Set the settings as desi red.

Field Description

DNS SRV • ON: Bria will use DNS SRV to discover the network addresses for your VoIP service

provider's VoIP-related services such as a STUN server, if any.

• OFF: Bria will not use DNS SRV for discovery. Only turn this setting off if your system administrator advises you to do so.

STUN Server Used only if STUN is ON. The default is stun.counterpath.com but we recommend that you

change this to an address provided by your VoIP service provider. CounterPath cannot guarantee the availability of their STUN server.

STUN Wi-Fi • ON: Bria will use a STUN server to discover your public IP address.

• OFF: Bria does not discover your public IP address. Therefore, only the private IP address will be used. T ypically, Global IP should be set to OFF to assure that the private IP address is used for SIP signaling.

STUN Mobile This setting has the same function as STUN Wi-Fi, but applies only when you are connected

over the mobile network.

Page 59

Bria iPhone Edition User Guide

Y ou can only enable these codecs if you have purchased them; see page 57.

Drag the codec up or down to change its priority in the list. See below.

Audio Codecs Selection

Mobile Audio Codecs Wi-Fi Audio Codecs

These two screens list the audio codecs that can be used during a Wi-Fi call or mobile data call. Codecs are programs in Bria involved in transmitting audio; each codec has different characteristics and therefore each works better in some situations than in others.

In general, it is desirable to have se veral code cs enab led. Mak e sure that there are common codecs be tween you and the remote peer, otherwise your call will fail with a 488 error.

Novice and Non-technical Users

We recommend you use the default setting/priority and let Bria select the best codec to use in a given situation.

Technically Savvy Users

You may choose to enable one, some or all codecs. If only one codec is enabled, all calls will be made with that codec. If more than one is enabled, Bria negotiates the codec to use (from among the enabled codecs) with the other person.

You can prioritize codecs by dragging them up or down in the list. Codecs higher in the list are given a higher priority in the offer, when negotiating codecs with the other party. Therefore, moving a codec higher should improve its chances of being chosen.

G.722, AMR-WB, SILK-WB (16kHz), SILK-HD (24kHz), and Opus-Full HD (48kHz) are wideband codecs. All other codecs are narrowband. When a wideband codec is used, data usage will be higher and audio quality will generally be better. When a narrowband codec is used, data usage may be lower but audio quality may be affected.

Data usage for the codecs with a fixed bit rate, from high to low usage, is: G.722, G.711, iLBC, GSM, G. 729a. AMR-WB, SILK, and Opus have a variable bit rate; the data usage will fluctuate depending on the network conditions.

Page 60

CounterPath Corporation

Drag the codec up or down to change its priority in the list. See below.

Video Codecs Selection

The screen lists the video codecs that can be used during a video call over Wi-Fi and a mobile network.

Novice and Non-technical Users

We recommend you enable all codecs and let Bria select the best codec to use in a given situation.

Technically Savvy Users

Page 61

Bria iPhone Edition User Guide

5.4 Premium Features

To purchase an item, tap the item. On the Product Detail screen, tap the price button to connect to the iTunes store. A confirmation prompt appears. Tap Cancel or Buy.

AMR-WB Audio Codec

Adaptive Multi-Rate wideband (AMR-WB) audio codec is a wideband codec that provides superior sound quality due to a wider speech bandwidth.

G.729 Audio Codec

G.729 is a narrowband codec that is intended for low bandwidth use. It is particularly recommended if you will be making calls over 3G/4G because it provides better audio quality on your mobile data connection.

Presence and Messaging

Presence and Messaging allows you to send instant messages to your buddies and share your online status (presence) with them. You can use this feature on XMPP accounts (such as Gmail or Facebook) and/or SIP accounts, depending on whether your VoIP service provider supports this feature for SIP SIMPLE. With SIP accounts, you can also send SMS to PSTN cell phone numbers if your VoIP service provider supports this feature.

After the purchase, the IM tab appears on the bottom of your Bria. See page 6 to set up this feature.

Video Calls

With this feature, you can make video calls to softphone numbers over Wi-Fi and mobile data network. The codecs H.264 and VP8 are supporte d. Make su re that you r VoIP service provider supports video calls before the purchase. After the purchase, enable video on Preferences and on your SIP account. Then you will see an option to make video calls on the Contacts or History tab.

Page 62

CounterPath Corporation

5.5 Share

You can easily share Bria via Facebook, Twitter, and Email. This feature requires iOS6.

1. On your iPhone, sign into Facebook /Twitter from the Settings app. You do not need to install the Facebook or Twitter app. As for Email, make sure your Email account has been set up on your iPhone.

Page 63

2. Open Bria, and tap the Settings tab.

Tap Settings > Share, then choose how you want to share.

A draft message appears.

Facebook message. You can also choose audience and add location to the post.

Twitter message. You can also add location to the post.

Tap Post/Send on the top right corner. Bria posts the message on your behalf.

Email. Choose who to send it to.

Bria iPhone Edition User Guide

Page 64

CounterPath Corporation

Page 65

Bria iPhone Edition User Guide

The log file is sent to customer support.

Tap OK

A new e-mail opens

The e-mail opens in the e-mail service that you have configured on your iPhone. If you have not yet configured a service, you will first be prompted through the setup steps and then the new e-mail will open.)

Enter a description of the problem. See below for details.

Then tap Send

Tap Yes

A Troubleshooting

Using Bria Diagnostics

If you have a problem with Bria, customer support may ask you to turn on diagnostics to capture information.

1. Go to Settings > Advanced Settings. If Verbose Logging is OFF, turn it to ON and tap Apply Changes.

2. Reproduce the problem. When done, go to Settings > Advanced Settings agai n. Tap Send Log. A prompt appears.

3. The description of the problem could include the following:

• What you were doing when the problem occurred.

• Your Apple device and model.

• Any recent changes you have made to your setup of Bria.

• Whether you are in your “home” Wi-Fi zone (your normal Wi-Fi zone) or a different Wi-Fi zone.

Page 66

CounterPath Corporation

• Whether you normally have 3G/4G enabled on your device and in Bria.

4. When done, turn off Verbose Logging. Tap Apply Changes.

More Information

You can view Frequently Asked Questions at http://support.counte rpath.com/counterpath/products/ counterpathtac_bria_iphoneipad_edition.

Page 67

Bria iPhone Edition User Guide

Tap to save

Tap

Complete the fields as required; see below.

Tap

The dial plan is added to the list.

B Dial Plans

You can create a dial plan in order to modify a phone number used in a phone call (the “input”), in order to ensure the call is placed successfully. For example, you could create dial plan to change any number that starts with “+1613” to just “613”.

Setting up Dial Plans

You can create as many dial plans for an account as you need. A dial plan belongs only to one account. Bria goes through the dial plans in the order in which they appear on the screen. You can drag dial plans to change their order.

Go to Settings > Accounts > tap the account. Scroll down.

Page 68

CounterPath Corporation

Designing the Dial Plan

A dial plan has two parts:

• A pattern that the phone number (the input) must match.

• The modification to make if the input matches that pattern: removing a prefix, adding a prefix, or removing one prefix and adding another one. Subsequence substitution is also supported.

Example 1

Match number: +1613x. Remove Prefix: +1613 Add Prefix: 9

If the input starts with “+1613”, then re move th e “+16 13 ” then add “9 ” a nd dia l the n umber. So +16135550012 is dialed as 95550012.

Example 2

Match number: [2-9]xxxxxxxxx Add Prefix: 1

If the input is a 10-digit number starting with a number other than 1, then add “1” and dial the number. So 6045550012 is dialed as 16045550012.

The Pattern

The pattern can be made up of any combination of the following:

Element Description

0 to 9 Any digit x A single wildcard * # + These symbols [ ] A collection that can include range. For example [6-9] means 6 7 8

9. Or [136-9] means 1 3 6 7 8 9.

. Repeat the last element 0 or more times. For example, with the

pattern “12.” the following input will match: 1 (The “2” is repeated zero times) 12 122 1222 and so on

The Modification

The modification can add or remove characters, and can be made up of digits, wildcards or symbols.

Page 69

Bria iPhone Edition User Guide

Advanced Dial Plan: Subsequence Substitution

The match pattern can include a sequence of numbers to match and another sequence to substit ute for the match. This feature is useful if you want to convert a sequence with in the input, not just add or remove a prefix.

The syntax is:

For example: <604:250> means change the sequence “604” to “250”. The sequence substitution element can be combined with any other elements in the match pattern. For examp le : +x.<604:250>x. would change match +6045551212 and +16135556040 and in both cases change the “604” to

“250”.

Page 70

CounterPath Corporation

Page 71

Bria iPhone Edition User Guide

C Glossary

Bria call A call made using the Bria screen. Compare to “native call”. Codec Codecs are programs in Bria involved in transmitting audio; each codec has different

characteristics and therefore each works better in some situations than in others.

DTMF Dual-tone multi frequency. DTMF is the system that is used in interactive voice-

response menu systems such as the menu system for accessing voicemail messages. The DTMF system allows the user to interact with the menu by pressing keys on a

dialpad or keyboard. Home button The button at the bottom of the iPhone or iPod touch. IM Instant Messaging. A technology that lets users send text messages for near

instantaneous delivery and display on each others’ devices. ICE Interactive Connectivity Establishment. A method for traversing a firewall. IP address A unique number that identifies a device. Devices on a network use the IP address to

communicate with each other. IVR Interactive Voice Response. IVRs use DTMF. Media The audio portion (and the video portion if any) of a call. Compare to Native call A call made using the phon e service that comes wi th the iPhone. Doe s not apply to t he

iPod touch. Native phone service The phone service that comes with the iPhone. PSTN Public Switch Telephone Network. The traditional land-line phone network. Presence An instant messaging feature that allows users to share information about their online

status. Signaling The information in a call that deals with establishing and controlling the connection,

and managing the network. The non-signaling portion of the call is the Media. SIP Session Initiation Protocol. The signaling protocol followed by Bria for handling

phone calls. SIP account An account that provides the user the ability to make VoIP phone calls. The account

encapsulates the rules and functions the user can access. softphone address The address used to connect to a SIP endpoint. In other words, the “phone number”

used in a VoIP phone call. For example, sip:joseph@domainA.com. STUN Simple Traversal of UDP through a firewall or NAT. Wi-Fi call A Bria call made over the Wi-Fi internet. To make a Wi-Fi call, you must be in a Wi-

Fi zone. XMPP account An account that provides the user with the ab ility to send IMs an d view other people ’s

presence. 3G/4G call A Bria call that uses the mobile data newtork rather than the Wi-Fi network. If you

start (or receive) a call with an iPhone when you are not in a Wi-Fi zone, the call will

be a 3G/4G call. Not all supported devices support 3G; see page 3.

“Signaling”.

Page 72

CounterPath Corporation