Congratulations on your
purchase of a Corsair Link Kit.
Corsair Link replaces manual controls for
fans and lighting with an elegant software interface,
while simultaneously oering more advanced control
and expansion options than motherboard BIOS
settings. Everything is available on your screen with
a software interface that’s advanced, intuitive, and
fun to use.
This guide will help you install your Corsair Link Kit.
It covers installation of both the Corsair Link Cooling
Kit, and the Corsair Link Cooling and Lighting Kit.
Package Contents
The Corsair Link Cooling Kit includes:
A
Corsair Link Commander
with mounting screws
B
Corsair Link Cooling Node
with double-sided adhesive strip
D
Digital cables (3)
E
Thermal sensors (3)
F
Fan extensions (5)
The Corsair Link Cooling and Lighting Kit
includes everything above, plus:
C
Corsair Link Lighting Node
with double-sided adhesive strip
G
RGB LED strips with attached
adhesive strips (3)
H
RGB LED strip extensions (3)
E
D
Digital cable (1)
corsair.com/link
Corsair Link Quick Start Guide
A B
C
D E F G H
Installation Note:
Before proceeding with installation, please read
this guide in its entirety. Before you begin, turn
o your PC and disconnect the AC cable from
the power outlet.
2
Corsair Link Diagram
A
D D
B
Installing the
Corsair Link Commander
The Corsair Link Commander (A) is the hub of
your Corsair Link system. It is the interface between
the Corsair Link Dashboard software and all of your
Corsair Link components.
Mount the Corsair Link Commander in any empty
3.5" drive bay using the provided screws. Then, connect
the attached cable to any available USB 2.0 header on
your PC’s motherboard. Take care when connecting the
USB cable, as it is keyed to prevent incorrect installation.
FG
A
C
E E
UP TO 33 LED STRIPS UP TO 33 LED STRIPS
Installing the
Corsair Link Cooling Node
3
The Cooling Node (B) may be used to control any PC
case fan which uses a three-pin or four-pin cable. It is also
used to monitor ambient temperatures within your PC
case using the provided thermal sensors.
The Cooling Node may be mounted on any interior
surface of your PC case using the included double-sided
adhesive strip. We recommend making all the required
connections first, and then attaching the Cooling Node
to your PC case as the last step.
1. Connect the Cooling Node (B) to the
Corsair Link Commander (A) using one
of the provided digital cables (D).
2. Connect any case fans you wish to control to the
Cooling Node, using the four-pin headers on the left
side of the Cooling Node. The provided fan extension
cables (F) can be used if necessary.
3. Connect the thermal sensors (E) to the two-pin
headers on the right side of the Cooling Node.
4. Connect the Cooling Node power cable to a
four-pin molex connector from your power supply.
5. Attach the Cooling Node to an interior surface of
your PC case using the provided double-sided
adhesive tape.
Tips for connecting thermal sensors
The thermal sensors (E) are designed to measure
ambient temperatures, so for the most accurate
results, they should not directly touch components.
You may find it useful to mount the thermal sensors
near air intake and exhaust points, and if your PC case
has multiple compartments, you can try placing each
of the sensors in its own compartment. Since the
thermal sensors can easily repositioned, you can try
various locations and use what works best for you.
B
(x5)
E
F
If you are installing the Corsair Link Cooling Kit:
Congratulations! You have completed the hardware installation. Please proceed to Downloading Corsair Link Dashboard.
4
Installing the
Corsair Link Lighting Node
The Lighting Node (C) is included with the Corsair Link
Cooling and Lighting Kit. This dual-channel lighting
controller can be adjusted with the two buttons built into
the Lighting Node, or with Corsair Link Dashboard. Three
RGB LED strips (G) are included, and the Lighting Node
can control up to 33 strips (available separately).
G
C
1. Connect the Lighting Node (C) to the
Corsair Link Commander (A) using one
of the provided digital cables (D).
2. Connect the RGB LED strips (G) to the
connectors on the Lighting Node.
3. Connect the Lighting Node power cable to a
four-pin molex connector from your power supply.
4. Attach the Lighting Node and LED strips to
interior surfaces of your PC case using the provided
double-sided adhesive strips.
Downloading
Corsair Link Dashboard
The software can be downloaded
from the following locations:
Corsair Link Cooling and Lighting Kit
•
corsair.com/link-cool
•
Corsair Link Cooling Kit
corsair.com/link-light
Installation and operating instructions for
Corsair Link Dashboard are included in the download.
corsair.com
EMAIL: support@corsair.com
FACEBOOK: facebook.com/corsairmemory
BLOG: blog.corsair.com
FORUM: forum.corsair.com
TWITTER: twitter.com/corsairmemory
CORSAIR LINK PAGE: corsair.com/link
USA and CANADA: (800) 205-7657 | INTERNATIONAL: (510) 657-8747 | FAX: (510) 657-8748
46221 Landing Parkway • Fremont • California • 94538 • USA
© 2011 Corsair Components, Inc. All rights reserved. Corsair and the sails logo are registered trademarks, and Corsair Link is a trademark in the United States and/or other countries.
All other trademarks are the property of their respective owners. Product may vary slightly from those pictured. Document Number: 49-000087 revAA
Loading...