Cornelius P-N 629088650 User Manual

IDC Icemaker Adaptor Kit Installation Instructions

INSTALLATION INSTRUCTIONS

IDC ICEMAKER ADAPTOR KIT FOR P/N 629088650

Icemaker Adaptor Kit

Bar

FIGURE 1

1. Place bar into first set of pockets inside the ice bin.

2. Place Icemaker Adaptor Kit on top of unit.

3. Place icemaker on top of kit. DO NOT slide icemaker into position on the lid.

4. Apply a continuous bead of NSF International (NSF) listed silastic sealant (Dow 732 or equivalent),
supplied in kit to seal the icemaker to the top of the adapter kit. All excess sealant must be wiped
away immediately.

5. Secure the icemaker to the adapter by drilling 9/64” diameter holes, using one of the two brackets
supplied in the kit, into both the rear of the icemaker and rear of the icemaker adapter kit. Use
extreme care not to drill into any icemaker components!!! Secure the brackets using the screws
provided.

Revision Date: January 30, 2006 www.cornelius.com Revision: C

© 2005-2006, IMI Cornelius Inc. - 1 - Publication Number: 629088650INS

IDC Icemaker Adaptor Kit Installation Instructions

6. Assemble bin stat to icemaker, as shown. The bin stat must not interfere with the agitator rotation
and not be in the path of ice falling from the icemaker.

FIGURE 2. BIN STAT ASSEMBLY

7. For optimal performance, do not fill ice bin more than 2/3 capacity (maximum fill is 4” below top of
bin). Applies to IDC 255 models only.

Publication Number: 629088650INS - 2 - © 2005-2006, IMI Cornelius Inc.