Cornelius FlavorFusion P/N 629088673, FlavorFusion P/N 629088676, FlavorFusion P/N 629088674, FlavorFusion P/N 6290889675 Installation Instructions Manual

FlavorFusion Icemaker Adaptor Kit Installation Instructions
WARNING:
WARNING:
Bar
Icemaker Adaptor kit
INSTALLATION INSTRUCTIONS
FLAVORFUSION ICEMAKER ADAPTOR KIT FOR P/N 629088673, 629088674, 6290889675,
AND 629088676
Disconnect power to the unit before installing adaptor following all lock out / tag out procedures established by the user. Verify all of the power is off to the unit before performing any work. Failure to comply could result in serious injury, death or damage to the equipment.
All of the attachment screws and plates must be installed as directed in this manual. Failure to comply could result in serious Injury, Death or Damage to the equipment.
Revision Date: August 3, 2010 www.cornelius.com Revision: C
© 2005-2010, IMI Cornelius Inc. - 1 - Publication Number: 629088673INS
FIGURE 1
FlavorFusion Icemaker Adaptor Kit Installation Instructions
ICE MAKER
SUPPORT RAIL
1. First step is to position and secure the kit to the dispensing unit. Whenever possible, this should be done prior to lifting the dispenser onto the counter to allow sufficient access and also provide easier and faster installation.
FIGURE 2
2. Place ice maker support rail into the front set of pockets in the ice bin as shown in Figure 2.
Publication Number: 629088673INS - 2 - © 2005-2010, IMI Cornelius Inc.
Loading...
+ 2 hidden pages