Cornelius FlavorFusion 255 User Manual

Flavor Fusion 255 Drip Tray to ‘Z’ Style Unit Conversion Installation Instructions

INSTALLATION INSTRUCTIONS

FLAVOR FUSION 255 WITH DRIP TRAY TO ‘Z’ STYLE UNIT CONVERSION

#8-18 X 1/2" LONG SCREW

P/N 620705801

2 PLACES

DETAIL A SCALE 0.375

ADJUSTABLE FORMING BRACKET

(HELPS TO KEEP SPLASH PANEL

SIDES FLUSH WITH SIDE PANELS,

MOUNT BRACKETS INSIDE OF

SPLASH PANEL) P/N 620053264

2 PLACES

SEE DETAIL A

'Z' STYLE SPLASH PANEL P/N 620053350 (SILVER) P/N 620053351 (BLACK)

#8-32 MOUNTING SCREWS

2 PLACES

P/N 70178

(PLUMB TO EXISTING DRAIN LINE)

1" BARB SPLICER

P/N 53293

HOSE CLAMP

1 PLACES

P/N 70750

BE SURE TO INSULATE ALL FITTINGS/HOSE WITH INSULATION TUBE

AND TAPE SUPPLIED IN KIT. FAILURE TO DO SO WILL LEAD TO CONDENSATION PROBLEMS

THIS EQUIPMENT MUST BE INSTALLED WITH ADEQUATE BACKFLOW PROTECTION

TO COMPLY WITH APPLICABLE FEDERAL, STATE AND LOCAL CODES.

IMPORTANT!!!

DRAIN TUBE

P/N 53169

EXISTING COLDPLATE

DRAIN BOOTS

2 PLACES

3/4" BARBED ELBOW

2 PLACES

P/N 51280

HOSE CLAMP

4 PLACES

P/N 71086

Release Date: July 7, 2006 www.cornelius.com Revision: B

Specifications and Main Features