Cornelius Flavor Blast Tower Installation Manual

INSTALLATION INSTRUCTIONS

(4 Places)

(4 Places)

(4 Places)

(4 Places)

(4 Places)

(4 Places)

1

2

4

6

16

8

3

5

17

19

9

12

13

15

10

18

15

14

11

FLAVORBLAST™ TOWER KIT

Component and Overall Assembly

FlavorBlast™ Tower Kit Installation Instructions

Revision Date: May 12, 2014 www.cornelius.com Revision: C
© 2008-2014, Cornelius Inc. - 1 - Publication Number: 629096818INS

Figure 1.

FlavorBlast™ Tower Kit Installation Instructions

Item No. Part No. Description

1 70188 #8-32 Knurled thumb screw

2 620520570 Tower cover

3 620314823 PC board

4 620715833 Inner nozzle

5 620053016 Tower

6 620055921 Nozzle housing

8 70015 #10-32 KEPS nut

9 2487 Solenoid

10 620718933 1/8” barb X 1/4” FPT straight fitting

11 620054630 Flavor Blast plastic housing

12 620709066 3/8” Dole X 1/4” barb straight fitting

13 1945 Outer nozzle, black

14 620053443 Tower front panel

15 70171 #8-32 X 3/8” Long truss head phillips machine screw

16 620716512 Cuprest

17 620053702 Driptray

18 77010100 Flare nut

19 620052284 Solenoid holddown plate

- 52792 1/4” ID Red-line Plus braided tubing

- 620313280 Membrane keypad

- 620316443 Solenoid power harness

- 620318305 24V Power harness (from x-frmr to pc board)

- 630000601 115V to 24V Transformer assembly

- 770000119 1/8” ID clear tubing

- 77040700 1/4” Barb X 3/8” barb splicer

- 311908000 #11.3 Oetiker clamp

- 620313686 Keypad harness to PC board

INSTALLATION

1. Set-up flavors in Back-Room Package area as shown in Figure 2. CO2 pressure must be set at 30 PSI and
syrups must be ambient temperature.

2. Locate and mark the approved location for the tower installation.

Publication Number: 629096818INS - 2 - © 2008-2014, Cornelius Inc.