NORDIC CCM1030 SERIES
MODULAR CUBED ICE MAKER
Ice maker shown on B842SS bin
FEATURES
High-yield – Produces up to 1077 lbs. (490 Kgs.) of ice/day
Durable – Constructed from corrosion-resistant stainless steel
Antimicrobial – Built-in Agion Antimicrobial product protection effective against mold, mildew, and fungus
Small footprint – Ultra low-profile - only 26" (660 mm) tall
Smart – Harvest assist reduces utility consumption
Customizable – Choice of full or half cube size
Easy to maintain – No air filter to clean or replace
Protected by Agion
Agion is a trademark of Agion Technologies, Wakefield, MA.
Dimensions and Air Flow
Air in-rear
of icemaker
24"
(610 mm)
32"
(813mm)
30"
(762 mm)
Air Out -
(side discharge)
26"
(660 mm)
74"
(1880
CONDENSER-WATER OUT
1/2" (13mm) FPT
CONDENSER-WATER IN
3/8" (10mm) FPT
(51 mm)
2.00"
3.44"
(87 mm)
.62"
(16 mm)
HARDWARE FOR STRAP
MOUNTING TO BIN
7/8" (22 mm) DIA. HOLE FOR
(762 mm)
5.00"
(127 mm)
9.81"
2.31"
(59 mm)
(249 mm)
REAR VIEW
(WATER/REMOTE COOLED)
DISCHARGE LINE, 1/2" (13 mm) MALE QUICK CONNECT COUPLING
FOR USE WITH RT-325-404 OR
RT-340-404 PRECHARGED LINE SET (REMOTE ONLY)
REMOTE CONNECTIONS
7/8" (22 mm) DIA. HOLE FOR
ELECTRICAL CONNECTIONS
ELECTRICAL CONNECTION
JUNCTION BOX
ICEMAKER
POTABLE
WATER IN
3/8" (10 mm) FPT
2.63"
(67 mm)
0.70"
(18 mm)
5.00"
(127 mm)
LIQUID LINE, 3/8" (10 mm) MALE QUICK CONNECT COUPLING
FOR USE WITH RT-325-404 OR
RT-340-404 PRECHARGED LINE SET (REMOTE ONLY)
22.24"
(565 mm)
20.49"
(521 mm)
5.94"
(151 mm)
ICEMAKER-WATER OUT
3/4" (19 mm) FPT
REAR VIEW
(AIR COOLED)
0.70"
(18 mm)
2.63"
(67 mm)
5.94"
(151 mm)
OPERATING LIMITS
Ambient Temp. Range Air & Water 50° - 110°F (10° - 43°C)
Water Temp. Range 40° - 110°F (4.5° - 43°C)
Water Pressure Ice Maker Water in
Condenser Inlet Water
(Water cooled only)
Min. 20 psi (1.4 bar)
Max. 60 psi (4.1 bar)
Min. 20 psi (1.4 bar)
Max. 60 psi (4.1 bar)
20.49"
(521
(565
mm)
22.24"
mm)
Water Used-Gals.
Ice Prod.
per 24 hrs.
at 70° Air /
Cond.
MODEL NO.
CCM1030A*21
CCM1030RH22
CCM1030A*51
MODEL NO.
RC08002
RT25
RT40
RT60
See Bin specification sheet for information on ice storage bins.
* Represents cube size. For full cube substitute an “F”, for half cube substitute an “H”.
Please note: air-cooled units require 6” (152 mm) clearance for air intake and exhaust.
Unit
Air 1071 (487) 803 (365) 21.3 n/a 5.7 16558 208-
Remote 1077 (490) 921 (419) 21.8 n/a 5.4 18377 208-
Air 1044 (475) 790 (359) 20.8 n/a 5.5 15877 230/60/1 12.6
Remote Condenser for 1 model CCM1030R (208-230/50-60/1 voltage) 95 (43)
25 ft. (7.6m) Precharged Tubing Kit for R-404A models 13 (6)
40 ft. (12m) Precharged Tubing Kit for R-404A models 18 (8)
60 ft. (18.2m) Precharged Tubing Kit for R-404A models 26 (12)
50° Water
lbs. (Kgs.)
Ice Prod.
per 24 hrs.
(Ltrs.) per 100 lbs. of
ice 90° Air / 70° Water
at 90° Air /
70° Water
lbs. (Kgs.)
Ice Prod.
Use
Description Shipping Weight lbs. (Kgs.)
Cond.
Use
Kilowatts
Used per
100 lbs.
of ice 90°
Air / 70°
Water
Heat
Rejection
(Btuh)
Electrical
Rating
230/60/1
230/60/1
Min.
Circuit
Amp.
13.8
13.8
TECHNICAL SPECIFICATIONS
NUMBER OF WIRES ........... 3
MAX. FUSE SIZE .............. 50 Hz: 16
60 Hz: 20
SHIPPING WEIGHT LBS (KGS.) .. 225 (102) - 230 (107)
AGENCY LISTINGS ............
© 2016 CORNELIUS
CG5063-0516
Cube Size: Width Depth Heigth
Full 7/8" (22mm) 7/8" (22mm) 7/8" (22mm)
Half 3/8" (10mm) 7/8" (22mm) 7/8" (22mm)
IN THE U.S.A.
Ph: 800.238.3600
Fax: 800.258.0255
OUTSIDE THE U.S.A.
Ph: 763.488.8200
Email: webmaster@cornelius.com
101 Broadway Street West
Osseo, MN 55369
www.cornelius-usa.com
For more information or to place an order, contact your sales representative or authorized distributor.