Cornelius CCM0522AF1 User Manual
NORDIC CCM0522 SERIES
MODULAR CUBED ICE MAKER
Ice maker shown on B322AP bin
FEATURES
High-yield – Produces up to 559 lbs. (254 Kgs.) of ice/day
Durable – Constructed from corrosion-resistant stainless steel
Antimicrobial – Built-in Agion Antimicrobial product protection effective against mold, mildew, and fungus
Small footprint – Ultra low-profile - only 23" (584 mm) tall and 22" (558 mm) wide
Smart – Harvest assist reduces utility consumption
Customizable – Choice of full or half cube size
Easy to maintain – No air filter to clean or replace
Protected by Agion
Agion is a trademark of Agion Technologies, Wakefield, MA.
6.00"
(152mm)
minimum
wall
clearance
side & rear
Front of Machine
Ice dispense area to "bin"
Top View
3.72"
(95mm)
21.50"
(546mm)
.85" (22mm)
1.07"
(27mm)
5.80
5.68
CONDENSER WATER IN
3/8" FPT
4.18
0.38
2.68
2.97
4.40
Rear View Water Cooled
22.02
HARDWARE FOR MOUNTING
16.00
7/8" HOLE FOR ELECTRICAL CONNECTIONS
ICE MAKER WATER OUT 3/4" FPT
CONDENSER WATER OUT 1/2" FPT
TO BIN OR DISPENSER
ICEMAKER POTABLE WATER IN 3/8" FPT
24.14"
(613mm)
Air flow "out"
23.26"
(591mm)
R.H. Side View Air Cooled
23.00"
(584mm)
(264mm)
10.40"
8.34"
(212mm)
(25mm)
5.34"
(136mm)
1.00"
2.97"
(75mm)
22.02"
(559mm)
Condenser
air "in"
16.00"
(406mm)
7/8" (22mm) hole for electrical connections
Icemaker potable water in 3/8" (10mm) FPT
Icemaker water out 3/4" (19mm) FPT
Rear View Air Cooled
.38" (10mm)
Hardware for mounting
to bin or dispenser
Ice Prod.
per 24
hrs. at
70° Air /
Cond.
MODEL NO.
CCM0522A*1
CCM0522WH1
CCM0522A*5
See Bin specification sheet for information on Storage bins
• Represents cube size - for full cube substitute an “F” for half cube substitute an “H”.
Dispenser-mounted units require bin thermostat kit #1051020-02.
Please note: air-cooled units require 6” (152 mm) clearance for air intake and exhaust.
Unit
Water 527 (240) 442 (201) 23.2 128 4.2 7852 115/60/1 11.8 15
50° Water
lbs. (Kgs.)
Air 520 (236) 370 (168) 25.4 n/a 5.9 7753 115/60/1 16.0 20
Air 559 (254) 404 (184) 25.1 n/a 6.1 8617 220-
Ice Prod.
per 24
hrs. at
90° Air /
70° Water
lbs. (Kgs.)
Water Used-Gals.
(Ltrs.) per 100 lbs. of
ice 90° Air / 70° Water
Ice Prod.
Use
OPERATING LIMITS
Ambient Temp. Range Air & Water 50° - 110°F (10° - 43°C)
Water Temp. Range 40° - 110°F (4.5° - 43°C)
Water Pressure Ice Maker Water in
Condenser Inlet Water
(Water cooled only)
Min. 20 psi (1.4 bar)
Max. 60 psi (4.1 bar)
Min. 20 psi (1.4 bar)
Max. 60 psi (4.1 bar)
Cond.
Use
Kilowatts
Used per
100 lbs.
of ice 90°
Air / 70°
Water
Heat
Rejection
(Btuh)
Electrical
Rating
240/50/1
Dimensions and Air Flow
Air In - rear
of icemaker
24"
(610 mm)
(559 mm)
22"
Circuit
Air Out-
right side of
icemaker
23"
(584 mm)
(1804 mm)
Min.
Amp.
9.2 16
71"
Fuse
Size
TECHNICAL SPECIFICATIONS
NUMBER OF WIRES ........... 3
SHIPPING WEIGHT LBS (KGS.) .. Air: 165 (75)
Water: 175 (80)
AGENCY LISTINGS ............
© 2016 CORNELIUS CG5059-0516
31.75"
(807mm)
Cube Size: Width Depth Heigth
Full 7/8" (22mm) 7/8" (22mm) 7/8" (22mm)
Half 3/8" (10mm) 7/8" (22mm) 7/8" (22mm)
IN THE U.S.A.
Ph: 800.238.3600
Fax: 800.258.0255
For more information or to place an order, contact your sales representative or authorized distributor.
OUTSIDE THE U.S.A.
Ph: 763.488.8200
Email: webmaster@cornelius.com
101 Broadway Street West
Osseo, MN 55369
www.cornelius.com
Loading...