SEEK
SEEK
64 Step CV / Gate STEP SEQUENCER
MANUAL v01 for firmware version 1.02_04
COPPER TRACES
www.coppertracesmusic.com
UNIVERSAL FUNCTIONS
The mode buttons always perform the same function regardless of other settings.
RUN
Toggles the sequence between run and stop states
RESET
Sets the next step to be played to step one and resets the internal clock divider so the
next clock pulse will always start with the beginning of step one
PLAY
Sets the mode to play
LOAD
Sets the mode to load
[EDIT]
Sets the mode to edit
JUMP
Makes faster changes to various values shown on the display in load and edit modes.
Hold < or > then press [ENTER]
Holding the forward or backward button and pressing enter will add or subtract eight from
the displayed value.
EDITING STEP VALUES
Each step can be modified in play and load modes using the keyboard and the step property
buttons.
Keyboard
Chooses the note for that step
OCT.
Increase or decrease the octave of that step
LEGATO
Ties the current step to the next by not lowering the gate during that step
ACCENT
Makes the accent output go high during that step
REST
Prevents the gate output from going high on that step
PLAY MODE
In play mode the display always indicates the current output. When running, the clock
determines when a new step is displayed and the output is updated. When stopped, changes to
the current step and output can be made manually. Changes can be made to the steps
dynamically while running the sequence in play mode. Holds in this mode are only recognized for
keyboard notes and will be ignored for all other step values.
While running:
< or >
Slips the sequence one step forward or backward by skipping or repeating a step
While stopped:
< or >
The forward and backward buttons manually step through the sequence with the CV
output changing as the current step changes. The gate output will stay high as long as the
direction button is held.
Keyboard and OCT.
Changes to the note using the keyboard and changes to the octave will immediately
update the CV output and will output a gate as long as the button is pressed.
LOAD MODE
It is possible to edit the sequence independent of playback using load mode.
< or >
Navigate to different steps in the sequence
Hold < or > then press [ENTER]
Jump - Goes forward or backward eight steps in the sequence from the current step each
time enter is pressed
Loading...