Cooper B-Line 200H User Manual

Fig. 200H - Heavy Duty Band Hanger (For Trapeze)

Size Range: 2” (50mm) thru 4” (100mm) trapeze pipe size.

Material: Steel — Pre-Galvanized to G40 Spec

Function: Designed primarily to support substantially heavier loads

than is normally intended for the nominal hanger size. Used
extensively to support trapeze installations and the increased loads
from both above and below the trapeze assembly.

Features: Furnished with

Approvals: Underwriters Laboratories listed in the USA (UL) and

Canada** (cUL). Conforms to Federal Specification WW-H-171E &
A-A-1192A, Type 10 and Manufacturers Standardization Society
ANSI/MSS SP-69 & SP-58, Type 10.

Maximum Temperature: 650°F

Finish: Pre-Galvanized

Order By: Part number, pipe size and rod size.

Important Design Note. Because of the increased loads applied to the

trapeze assembly, both the upper trapeze supports as well as the lower
hanging unit must be able to hold the maximum loads intended.

3

/8"-16 or 1/2"-13 adjusting threaded ring nut.

(343°C)

Pipe Hangers

B

A

Part No.

200H-2-3/8 2" (50)
200H-2-1/2 2" (50)
200H-21/2-3/8 21/2" (65)
200H-21/2-1/2 21/2" (65)
200H-3-3/8 3" (75)
200H-3-1/2 3" (75)
200H-4-3/8 4" (100)
200H-4-1/2 4" (100)

* Select trapeze pipe size based on section modulus required for span of trapeze per information provided in

NFPA 13 (2002) Table 9.1.1.6.1 (a and b).

** All sizes are UL Listed to support up to 8" pipe at max spacing per NFPA 13.

Pipe Hangers & Supports

(150mm) and 8” (200mm) trapeze pipe, consult factory.

For 6”

All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.

in. (mm) in. (mm) in. (mm) lbs. (kN) lbs. (kg)

3

/8"-16 49/16" (115.9) 37/32" (81.7) 1200 (5.34) 48 (21.8)

1

/2"-13 423/32" (119.8) 33/8" (85.7) 1200 (5.34) 45 (20.4)

3

/8"-16 55/16" (134.9) 323/32" (94.4) 1200 (5.34) 59 (26.7)

1

/2"-13 515/32" (138.9) 37/8" (98.3) 1200 (5.34) 56 (25.4)

3

/8"-16 53/4" (146.0) 327/32" (97.6) 1200 (5.34) 63 (28.6)

1

/2"-13 57/8" (148.1) 331/32" (100.8) 1200 (5.34) 60 (27.2)

3

/8"-16 67/8" (174.6) 47/16" (112.7) 1200 (5.34) 76 (34.5)

1

/2"-13 71/32" (178.6) 419/32" (1116.7) 1200 (5.34) 73 (33.1)

62

Pipe Size Rod Size ABMax. Rec. Load Approx. Wt./100

Pipe Hangers