Cooper&Hunter CH24MSPHFC230VI Installation Manual

SOPHIA

M

UL

TI

-ZONE

INVERTER

WIRED CONTROL FOR
AIR CONDITIONER

INSTALLATION MANUAL

IMPORTANT NOTE:

Read this manual carefully before installing or operating
your wired remote control. Make sure to save this manual
for future reference.

T able of Contents

Wall-Mounted Remote Control Wiring...............................1

Wall-Mounted Remote Control Installation ........................6

Wall-Mounted Remote Control Wiring

WARNING

• The wiring should adapt to the wire control current.

Otherwise, electric leakage or overheating may occur
and result in fire.

• The specified cables must be used in the wiring. No

external force should be applied to the terminal.
Otherwise, the wire may be damaged and heating may
occur and result in fire.

CAUTION

• The shielded wire must be grounded.

•

The connecting cable shouldn't be longer than 20 m (65.5
ft).

• The remote control operates on a low-voltage circuit

loop. DO NOT connect a 220V or 380V cable to it.

• Make sure the configured tubes are 30-50 cm (12-20 ft)

or more apart.

• DO NOT employ an ohmmeter to detect the insulation

after wiring the remote control.

1

An overview of the wall-mounted remote control wire outlet

Top side wire outlet

Left side
wire outlet

Bottom side wire outlet

Right side
wire outlet

Fig. 1

1. Wiring diagram
Refer to the following diagram to wire the wall-mounted

remote control to the indoor unit.

oint, 5p

Wired control

Wired j

5-Core shield cable

Fig. 2

Infrared p

RUN

Indoor u

Indoor unit

ipe

+5V

GND

nit switchboard

2