Technical data sheet for
CONVOTHERM OES 6.06 mini mobile
General features:
- No fixed water or waste connections
- Advanced Closed System - automatic moisture regulation,
energy-efficient
- Press&Go - easy to use for perfect results
- Requires minimum space - fits anywhere, saving expensive
floor space
- Multi-purpose engaging frame - flexible use, various GN sizes
- Fume reducer - minimal steam in the kitchen
- 3-phase/alternating current - select when installing
Standard features:
- Crisp&Tasty (multi-level demoisturising)
- Multi-point core temperature sensor
- Double glass doors with integrated door lock position and
self—emptying condensate drip tray (door drip tray)
- Tray Timer (time-delayed loading for each level)
- Menus and icons make the appliance easy to operate
- Bright graphic interface with full-text display
- Digital dial for easy adjustment of temperature, time and core temperature
- Preselect start time in real-time mode
- Programme up to 250 recipes with up to 20 steps each
- CONVOTHERM Cookbook with pre-programmed recipes
- Cook & Hold and Delta-T cooking
- RS 232 interface
- Stores all device settings and recipes in an additional memory module
(ID module)
- Robust stainless steel design
- Zero-wear door contact switch
- Removable engaging frame and suction plate
- Hygienic plug-in gasket
- Condensate drip tray on appliance
- Oven light with shockproof glass cover
- Perpetual self-diagnosis for error recognition
- Emergency programme mode: Appliance can be operated with restricted
functionality even when technical malfunctions arise
- Detailed documentation, spare parts lists and circuit diagrams
- IPX 4 spray guard
- Rotary lever door lock with slam function
- Injector version
Optional features:
- CONVOControl software for fully-automated documentation and
archiving of cooking processes
- Communication module with RS 485, USB or Ethernet to network up to 31
CONVOTHERM appliances and Internet connection
- Left-hinged version
- Special voltage levels
- ConvoClean Automatic Cleaning System
Cooking programmes
Steaming at 30°C-120°C
- For steaming, stewing and poaching.
Superheated steam 100°C-250°C
- For roasting and baking.
Convection 30°C-250°C
- For grilling, quick roasting, baking
toasting and cooking as gratin.
Regeneration 120°C-160°C
- For regenerating dishes prepared
cold on plates or platters.
Optional Accessories
- Oven stand
- Wall bracket
- Baking sheets / pans
- Stacking kit
Technical data sheet for
CONVOTHERM OES 6.06
mini mobile
732
Dimensions
Width (mm) 515
Depth (mm) 599
Height (mm) 732
Weight (kg) 50
Packed Dimensions
Width (mm) 580
Depth (mm) 730
Height (mm) 970
Weight (kg) 68
Installation conditions
- Appliance must be installed on the level
- Do not install the appliance near, above or
below a source of heat or near flamable
surfaces
Installation clearances
- Left/right (mm) 50
- Rear (mm) 50
- Top (mm) 500 (for
ventilation)
Electrical Connection
Choose from 230-240V ~ 50/60Hz 1P+N+E or
400-415V ~50/60Hz 3P+N+E
(can be selected on site)
1P+N+E 3P+N+E
230V 400V
Connected load (kW) 3.0 5.7
Rated current (A) 13.1 11.8
Connection
cross-section*(mm2) 3.0x2.5 5.0x2.5
* recommended cross-section for uncovered
connection with max. length of 5m.
- Fit main switch (all-pin-circuit-breaker) on
site, in close proximity to the appliance.
- Connection for potential compensation.
Water Drawer
- Capacity to hold 5.5l
- Water: Drinking water quality with:
Overall hardness: 70-125 ppm
pH: 6.5 - 8.5
Conductivity: 20-200 μS/cm
Cl : max 100 mg/l
2-
SO
: max 150 mg/l
4
Fe: max 0.1 mg/l
Mn: max 0.05 mg/l
Cu: max 0.05 mg/l
Cl2: max 0.1 mg/l
Waste water drawer
- Maximum capacity 4.5l
Venting and ventilation
Sensible heat: 1100 KJ/h
Latent heat: 100 KJ/h
The appliance is intended for professional
use only
Spray guard: IPX4
Quality mark: TÜV GS
Noise emission: < 60 dBA
GN 2/3 shelves: 6
Shelf spacing: 50 mm variable
Shelves:
6 x 2/3 GN 40 mm deep
6 x 2/3 GN 20 mm deep
25 707
515
B A
599 62
M
599
42,5 430
132
66
145
DE
515
K
H
50
490
583
A = Drinking water drawer
B = Waste water drawer
D = Electrical connection
E = Equipotential bonding
H = Air bleed tube
K = Ventilation pipe
91
43
24
28
11639092
42,5
1086 50
50
487
Australia
Moffat Pty Limited
Australia
www.moffat.com.au
New Zealand
www.moffat.co.nz
Printed in China © Copyright Moffat Ltd Moffat/1146/10M/09.09
In line with policy to continually develop and improve its products, Moffat Limited reserves the right to change specifications and design without notice.
Victoria/Tasmania
740 Springvale Road
Mulgrave, Victoria 3170
Telephone 03-9518 3888
Facsimile 03-9518 3833
Email vsales@moffat.com.au
www.moffat.com.au
New South Wales
Telephone 02-8833 4111
Email nswsales@moffat.com.au
South Australia
Telephone 03-9518 3888
Email vsales@moffat.com.au
Queensland
Telephone 07-3630 8600
Email qldsales@moffat.com.au
Western Australia
Telephone 08-9202 6820
Email bgarcia@moffat.com.au
New Zealand
Moffat Limited
Christchurch
Telephone 03-389 1007
Email sales@moffat.co.nz
www.moffat.co.nz
Auckland
Telephone 09-574 3150
Email sales@moffat.co.nz