Contemporary Research QMOD-SDI User Manual

Product Manual

QMOD-SDI

QMOD™ HD-SDI Modulator

July 29, 2013
Control Firmware Ver 5.4
Encoder Firmware 02E7

Contemporary Research 1 QMOD-SDI

Table of Contents

Table of Contents ................................................................................................................................ 2

Overview ............................................................................................................................................. 3

Features................................................................................................................................................. 3

Integration ............................................................................................................................................ 3

Specifications ...................................................................................................................................... 4

Front Panel Setup ............................................................................................................................... 5

Front Panel Menus .................................................................................................................................... 5

Tips & Troubleshooting ....................................................................................................................... 7

Common Symptoms.................................................................................................................................. 7

General Symptoms and Solutions .............................................................................................................. 8

RS-232 Control Protocol ................................................................................................................... 10

RS-232 Commands ........................................................................................................................... 11

Control Commands ..................................................................................................................................11

RS-232 Cable Connections ................................................................................................................ 13

Single QMOD-SDI ....................................................................................................................................13

QMOD-SDI Daisy-Chain ...........................................................................................................................13

Rack Mounting .................................................................................................................................. 14

Safety Instructions ........................................................................................................................... 15

Limited Warranty and Disclaimer ..................................................................................................... 16

Contemporary Research 2 QMOD-SDI

Overview

CR QMOD™ technology is opening the door to new HDTV applications. Create your own on-site HDTV broadband
distribution system using a variety HD, SD, and AV sources with the Contemporary Research QMOD-SDI HDTV Modulator.
No matrix routers or IP resources required, just tune in with standard displays or CR HDTV tuners.

Compact and easy to integrate, the QMOD-SDI accepts SDI, Component, or S-Video/Composite NTSC, converts the audio
and video to a digital cable channel, and amplifies for distribution through broadband cable system. Innovative in design
and value, the QMOD-SDI opens the door to cost-effective distribution of HD-SDI broadcast sources and live video, digital
signage, HD subscriber sources, and EAS emergency AV, using existing broadband coax cabling in sports, retail and
entertainment facilities, corporate offices, colleges, schools and worship centers. Front-panel buttons and text menu
display simplify QMOD-SDI setup, with options for 2-way integration with custom control systems.

Features

Auto-senses digital HD-SDI (1080i/720p) and SD-SDI (480i)



Inputs analog Component, S-Video and Composite video



Employs pro-grade HD encoding that minimizes artifacts for motion video and signage “tickers”



Merges embedded audio with video from SDI, analog stereo, digital optical and coax inputs



Switches between SDI, Component, and video inputs



Creates an HD 720p/1080i or SD 480p/480i MPEG-2 stream with MPEG1 stereo audio for broadcast



Delivers a fully agile QAM 64/256 digital cable channel 2-135



Amplifies for distribution over an on-site broadband cable system with adjustable output level, compatible with



all cable format broadband systems
Sets up with front-panel buttons and easy to use menus, including inputs, encoding, channel, and RF options



Allows creation of two-part (XX-XX) and single-part (XXX –emulates Guide channel ID) virtual channels



Responds to GPI inputs to switch to EAS composite video and audio



Integrates with RS-232 control and feedback with simple ASCII commands



Saves power and rack space using efficient design, fan-free cooling, and compact enclosure



Includes compact switching power supply



Mounts in optional 1RU single (RK1) or dual (RK2) 19” rack kits



Meets RoHS safety and California energy standards



New – Auto-sync for Component input resolution, no need to set output resolution



New – Select 4:3 or 16:9 presentation of 480i video



Free option to drive 2-4 QMOD Modulators from a 12 VDC 4A power supply.



Integration

Connect SDI, Component, S-Video or Video source



Connect audio to digital optical, coax, or stereo audio inputs



Select inputs, channel, resolution, and RF output parameters from front-panel menus



Contemporary Research 3 QMOD-SDI

Specifications

Physical

Size: 8.5” [216mm] wide x 1.75” [44mm] height (1RU) x 6.0” [153mm] deep
Weight: 1.5 lbs [0.68kg]
Temperature: +32° to 122° F operating temperature, convection cooled
Mounting: Rack mounting for one or two units side-by-side optional (RK1, RK2)

Front Panel

Setup, Select and directional buttons for front-panel setup
Menu LCD, 2 lines of 20 blue characters each

Encoding

MPEG2 Profile: MP@HL for HD, MP@ML for SD
1080i, 720p, 480p, and 480i resolution, depending on input
Video Encoding bitrate 18 or 25 Mbps
MPEG1, Layer 2 audio

Modulation

Latency

Switchable 64/256 QAM, J83 Annex B, Interleaving Modes (128,1)
MER 38 dB typical
360 ms@720p, 660ms1080i, includes all processing and tuning
HDTV modulators experience more latency, as the media is converted to
MPEG2 and QAM, then distributed over RF.

Compliance

FCC Class B, ROHS, meets California standards

Power

2.1mm coaxial jack (inside center conductor positive)

0.8 A maximum, 11.5 to 13.5 VDC, 12 VDC typical

Real Panel

RS-232

Closures

SDI Input

Video Inputs

Audio Inputs

RF Out

DB-9 male, RS-232 data link to control system
300 to 19,200 baud (9600 default), 8 data bits, no parity, 1 stop bit
3 GPI Pins in DB-9, selects composite/stereo inputs for EAS
4=1, 9=2, 5=GND
BNC Female
SD-SDI rate 270Mb/s or HD-SDI rate 1.485Gb/s
Coax cable auto-equalizer for SD up to 460m, HD up to 230m (RG6)
Auto-sense 1080i at 29.97Hz, 720p at 59.94Hz, or SD 480i at 29.97 Hz
Video Format YCbCr 4:2:2
Can accept SDI embedded Stereo 48KHz digital audio, Groups 1-4
Component: RCA Y, Pb, Pr (1080i/720p/480p/480i) , 59.94/29.97 Hz
Note: If source outputs Component on a DB-15, use VGA cable to wire to QMOD, set
QMOD to Component

S-Video: Y(Composite), C (Blue Pb) 480i, 29.97 Hz
Composite: RCA female (480i), 29.97 Hz
Digital SPDIF: Coax and TOSlink optical output, PCM 48K sample rate
Analog L and R: 2 stereo RCA female jacks

Inputs assignable to video inputs
‘F’, female, 75 ohm impedance
Agile, channels 2-135 (48-860 MHz), standard, HRC, or IRC spacing
6 MHz bandwidth fits any open channel without interference to adjacent channels
1 KHz resolution, +/- 30 ppm accuracy, +/- 35 ppm stability
29 dBmV typical output power, attenuated in 5 steps, approx 4 dB

Includes

PS12-1 Switching power supply, 1A 12 VDC, fits in typical AC power strips
PS12-4Y 4A power supply with Y cable to drive 2-4 QMODs (free at time of order)

Options

RK1 Single Rack Kit , RK2 Dual Rack Kit
CC-232 RS-232 Cable

Firmware

4.5 Improved composite video operation

4.6 allows selection of 4:3 or 16x9 format on 480i, requires 02E7 encoder firmware

4.7 adds auto-sensing of input resolution

5.1 FPGA resets after 2 encoder resets

5.4 removes background color glitch

Contemporary Research 4 QMOD-SDI

Front Panel Setup

Menu

Parameters

Basic Settings

In most cases, the menus below will work for most displays at sites.

Video Input

This selects the appropriate input:

- SDI (autosenses 1080i, 720p, 480i)

- YPbPr (1080i, 720p, 480p, 480i)

- Video (automatically uses 480i)

- S-Video (automatically uses 480i)

HD Format

Component SDI auto-senses; Video and S-Video inputs are automatically set to
480i. Selection is locked unless there is no input.

- 1080i - 480p

- 720p - 480i

Channel

XXX
Left/Right steps through channel numbers (use Left to access high channels)

Cable Format

Standard cable frequencies (default)
HRC – same as Standard, channels 5 and 6 slightly different
IRC – All channel frequencies are different than the standard cable setting

RF Level dB

Sets the output level of the RF output, in dBmV

- 29 (default) -17

- 25 -13

- 21 - 9

Audio Input

Sets audio input for currently selected input (SDI, Component, and Video have separate
audio-follow memory)
SDI G1 – Embedded audio (normal stereo)
SDI G2 – Embedded audio
SDI G3 – Embedded audio
SDI G4 – Embedded audio
Digi (Digital) Optical
Digi Coax
Analog (default)

No Vid Color

Displays a color background with there is no video input, or the resolution doesn’t match the
QMOD settings.

- Orange

- Purple (default)

- Green

QAM Type

Today, most displays are set to tune 256 QAM. If a site has some very old displays, they
might only be able to tune in channels set to 64 QAM. Continuous Wave is often used to test
the channel with a meter.

- 64

- 256 (default)

- CW (Continuous Wave)

There are a number of parameters that can be set by front-panel Setup commands. In normal operation the
Up/Down arrows select channels, and the Left/Right arrows adjust volume.

 Pressing Setup enters the setup menus, shows last menu accessed
 Pressing Up and Down arrow keys steps through the QMOD-SDI options
 Pressing Left and Right keys steps through options for each front-panel menu
 Press Select to save desired option
 Pressing Setup ends menu item editing or exits the front-panel setup mode

Front Panel Menus

Contemporary Research 5 QMOD-SDI