Page 1
ENGINEERED SOLUTIONS
H-6 HUGGER Band
A simple, economical coupling for corrugated pipe
The H-6 HUGGER Band is a simple, low-cost coupling for
helically corrugated pipe with rerolled annular ends. Like
other HUGGER Bands, it offers simple, easy installation
and excellent soil tightness, plus the added benefit of
improved economy.
It is available from 12- to 36 inches and can be furnished
in galvanized steel, aluminum, polymeric-coated, or as
ALUMINIZED STEEL Type 2 for added corrosion resistance.
Within the size range shown, the H-6 HUGGER Band meets
the specifications of AASHTO’s Joint Performance Criteria in
the Standard Joint category.
H-6 HUGGER Band
H-6 HUGGER Band 2 2/3” x 1/2” Corrugation
Band
1
/2” diameter bolts
Techo-type angle
Band
Connection Detail
Techo-type angle attached with spot welds, rivets or hand
welds.
5
/8”
7
3
/4”
4
HUGGER
Band
Section
Type of
Pipe Size, in. Pipe Band Connector
12 thru 36 0.064-0.109 0.052 Techco type angle
Note: The H-6 HUGGER Band is also available with a single-bolt Techco-type
angle or with bolt, bar and strap connectors.
Nominal Thickness, in.
BRO-H6HB 1/15 Revision PDF
©2015 Contech Engineered Solutions LLC
All rights reserved. Printed in USA.
Loading...