CM3G-CM3GP-CM3GPP
Media Giant
Record from an external DVB-T tuner with the
Conceptronic CM3G/P/PP
How to…
Copyright® 2007 by Conceptronic – All rights reserved
www.conceptronic.net
Page 1 of 8
This how to document describes how to connect and use the Conceptronic Media Giant CM3G/P/PP with a
digital TV tuner in order to record from digital TV channels. This can be done with all digital tuners as long as
it has a composite video out and stereo audio out connections. DVB-c (cable), DVB-s (Satellite) and DVB-t
(Terrestrial) are (among others) supported.
Follow the next steps to view and record digital TV channels from a digital TV tuner through your CM3G/P/PP.
Step 1: Connecting the digital TV tuner to the Conceptronic CM3G/P/PP
Connect the composite* cable (yellow, red and white) to the AV input “AV1 IN” of your CM3G/P/PP:
*Composite cable
1
Copyright® 2007 by Conceptronic – All rights reserved
www.conceptronic.net
Page 2 of 8
Connect the other side of the composite cable to the AV Out connection of your digital TV tuner. Refer to the
manual of your digital TV tuner on how to connect the composite video and audio cable. Below you will see an
example of a digital TV tuner where the composite cable is connected to a SCART adapter.
2
* SCART Connector
Note: When using the SCART adapter from the CM3G/P/PP in combination with your digital TV
tuner in order to connect the composite cable, make sure the SCART adapter is set to
‘OUTPUT’.
3
Copyright® 2007 by Conceptronic – All rights reserved
www.conceptronic.net
Page 3 of 8
Loading...