Conair GSE1 User Manual

USE AND CARE

Congratulations on your purchase of the Obus Forme® by Conair™ Gel Seat. The Obus Forme Gel Seat combines the luxurious comfort of gel with contoured support for comfort in any seat, anywhere you go.

ABOUT YOUR OBUS FORME® BY CONAIR™ GEL SEAT

The ergonomically contoured pommel shape of the Obus Forme® by Conair™ Gel Seat helps to support you in proper, upright posture. A gel insert is set into a molded foam base so that the Obus Forme® by Conair™ Gel Seat conforms to your body for a personalized fit, and helps to reduce pressure on sitting bones. Its base is composed of polyurethane foam that is molded into a contoured shape to provide you with additional comfort.

The gel grid is designed to provide different zones of comfort and support for a luxurious sitting experience:

Zone 1: Dense gel provides firm support at the front and

back of your seat to help you sit upright.

Zone 2: Softer gel in the center and throughout the

remainder of the seat provides a cushioning effect to help soothe aching sitting bones.

The Obus Forme® by Conair™ Gel Seat cover is designed with a mesh interior to allow for increased air circulation.

HOW TO USE YOUR OBUS FORME® BY CONAIR™ GEL SEAT

Lightweight and portable, your Obus Forme Gel Seat is ideal for use anywhere you sit – at home, in the office and on the go!

CAUTION! This product may not be suitable for use in all vehicles, or while driving. Please refer to your vehicle’s owner’s manual for important safety guidelines if you are planning to use this product in your vehicle.

USE AND CARE TIPS

The Obus Forme Gel Seat is made with synthetic materials. If the surface of your cushion becomes soiled, it can be wiped gently with a damp cloth, mild soap and a sponge, or a soft brush. Do not rub the cushion excessively or place it in a washing machine. Avoid soaking the cushion as this may damage the material. To dry, pat with a clean, dry cloth.

MATERIALS

Exterior: 100% polyester

Interior: Molded foam base is 100% polyurethane foam;

gel grid is 100% Styrene Ethylene Butylenes Styrene Copolymer.

Product complies with all U.S. and Canadian regulations regarding flammability.

LIMITED ONE YEAR WARRANTY

Conair will repair or replace (at our option) your unit free of charge for 12 months from the date of purchase if the appliance is defective in workmanship or materials. To obtain service under this warranty, return the defective product to the service center listed below, together with your purchase receipt and $10.00 for postage and handling. California residents need only provide proof of purchase and should call 1-800-366-0937 for shipping instructions. In the absence of a purchase receipt, the warranty period shall be 12 months from the date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 12-MONTH DURATION OF THIS WRITTEN, LIMITED WARRANTY. Some states do not allow limitations on how long an implied

warranty lasts, so the above limitations may not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. Some states do not allow

the exclusion or limitation of special, incidental, or consequential damages, so the above limitation may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

For information on any Conair product call: 1-800-3-CONAIR or visit us on the web at: www.conair.com

Service Center Conair Corporation Service Department 7475 N. Glen Harbor Blvd. Glendale, AZ 85307

07NP230

GSE1

IB-7621

INS T RU C TI ON BO O KL E T

For your safety and continued enjoyment of this product,

always read the instruction book carefully before using.

FOR MOD EL GS E1