Conair GMT1000C User Manual
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially
when children are present, basic safety precautions should always be taken, including
the following:
READ ALL INSTRUCTIONS
BEFORE USING
KEEP AWAY FROM WATER
DANGER – Any appliance is electrically
live, even when the switch is off.
To reduce the risk of death or injury by
electric shock:
1. Unplug this appliance before cleaning.
2. Do not place or store appliance where it
can fall or be pulled into a tub or sink.
3. Do not use while bathing or in a shower.
4. Do not place in, or drop into water or
other liquid.
5. Do not reach for an appliance that has
fallen into water. Unplug immediately.
6. Except when charging, always unplug
this appliance from electrical outlet
immediately after using.
7. Never operate the adaptor if the
specification is out of the rating.
DO NOT REACH
INTO THE WATER
WARNING – To reduce the risk of
burns, electric shock, fire, or injury to persons:
1. This appliance should never be left
unattended when plugged in. Do not pull,
twist, or wrap line cord around appliance.
2. This appliance should not be used by,
on, or near children or individuals with
certain disabilities.
3. Use this appliance only for its intended
purpose as described in this manual. Do
not use attachments not recommended
by the manufacturer. Do not use an
extension cord to operate this appliance.
4. Never operate this appliance if it has
a damaged cord or plug, or if it is not
working properly, if it has been dropped
or damaged, or dropped into water.
Return the appliance to a service center
for examination and repair.
5. Keep the cord away from heated
surfaces.
6. Never drop or insert any object into any
opening on this appliance.
7. Do not place appliance on any surface
while it is operating.
8. Do not use this appliance with a
damaged or broken comb or with teeth
missing from the blades as injury may
occur. Before use, make certain blades
are aligned properly. (See “Care of your
trimmers”).
9. Do not use outdoors or operate where
aerosol (spray) products are being used
or where oxygen is being administered.
10. Never operate the appliance with the
air openings blocks or while on a soft
surface, such as a bed or couch, where
the air openings may be blocked. Keep
the air openings free of lint, hair, and the
like.
11. Always attach plug to appliance first,
then to outlet. To disconnect, turn all
controls to “OFF” then remove plug from
outlet.
12. Avoid skin contact with moving blades.
13. Do not short the polarity (output cord),
ensure jack is plugged into the unit
before plugged the adaptor into outlet.
14. This power unit is intended to be
correctly oriented in vertical or floor
mount position.
15. Be sure voltage is in correct voltage
before plugging in.
16. For connection to a supply not in
U.S.A, use an attachment plug adapter
of the proper configuration for the power
outlet.
17. CAN ICES-3(B)
Warning: Changes or modifications to this
unit not expressly approved by the party
responsible for compliance could void the
user's authority to operate the equipment.
SAVE THESE
INSTRUCTIONS
OPERATING
INSTRUCTIONS
SUPER STUBBLER
Maintain your look, everyday with the ultimate
in stubble control technology.
The Conair For Men Super Stubble has 24
ultra-precise length settings, so you can
maintain your preferred facial hair style at all
times.
Whether you’re looking for a short shadow
look, a longer stubble look, or even a short
beard, the Super Stubble is the ultimate in
stubble control. The motorised length control
gives ultra precise adjustment from a 0.4mm
shadow so you can get exactly the look you
want. The Super Stubble has an advanced
floating contouring head that tracks the curves
of your face for exceptional comfort and
control. It is powered by lithium Ion
technology, for reliable cordless use, even at
lower charge levels. It is 100% waterproof,
and can be easily cleaned under the tap or
even used in the shower.
FEATURES
• Advanced floating contouring head tracks
the curves of your face for exceptional
accuracy and comfort.
• Motorised length control from a 0.4mm
shadow with precise automatic adjustments
with memory function.
TM
• Lithium-Ion power performance for reliable
cordless use, even at lower charge levels.
• Advanced blade technology with
electro-chemically sharpened blades for
extreme sharpness and durability.
• LED screen displays selected cutting length
and charge time remaining.
• Protective comb guide delivers ultimate
length consistency, removable for easy
cleaning.
• Rapid charging system, 90 minute charge
provides 60 minutes use or 5 minutes quick
charge for a single stubble shave.
• Shaver-style power lead for convenient
rechargeable in the bathroom.
• Ergonomic design with curved body for
easy control and complete comfort in use.
• 3 Year Guarantee.
INSTRUCTIONS
FOR USE
IMPORTANT : CHARGING
FIRST TIME USE
The Super Stubble is so easy to use, but before
you do anything you must take your time to
charge the unit for 3 hours before its first use.
Even if you want to use it plugged in to your
shaver socket, this initial super-charge ensures
optimum power performance to give smooth
fast trimming every time. After the first charge a
full charge will only take 90 minutes. Maximum
battery capacity will only be reached after 3
charging/discharging cycles.
• Connect the power adaptor to the socket on
the underside of the charging stand
• Always check that the charging indicator on
the LED comes on when you place the
product in the power stand.
REGULAR CHARGING
• A full charge will take 90 minutes and will
supply enough power for minimum 60
minutes continuous cordless use. The
approximate remaining using time is shown
on the LED display.
• In order to maintain the optimum capacity
of the rechargeable batteries, the appliance
should be recharged for 3 hours every 3
months approximately.
• The super stubble comes with a quick
charge feature. A 5 minute charge will
provide enough power for approximately 3
minutes use.
• Charging takes approx. 90 minutes.
• When the unit is charging the display lights
up for a few seconds showing the running
time remaining. The minutes will flash
increase until it reaches maximum capacity
of 60 minutes.
• When LED display has less than 5 minutes
left, the time symbol indication will change
to red.
PREPARATION FOR USE
Always inspect the super stubble before use to
ensure the cutting head is free from hair and
debris and is running smoothly.
OPERATION
To switch the super stubble on, press the O/I
button. The LED will also show the selected
cutting height and approximate usage time
remaining. After 10 seconds, the blue LED for
the usage time remaining will be switched off
but cutting height LED will be kept illuminated
whilst the motor runs. When there is approximately 5 minutes left shown on the LED
display, the time symbol will change colour to
red and will also start to flash. When the LED
displays «00», this indicates that the unit needs
to be recharged,
run for a short while after.
however it may continue to
USING THE COMB GUIDE
The comb guide allows you to change the
cutting length of your trimmer. You’ll need to
experiment to find your preferred length, but as
a guide, 0.4mm will give you very short stubble,
whilst 1.6mm will give you a longer stubble
look. 2mm+ will give you a short beard.
• Ensure the comb guide is correctly
positioned by pushing the comb guide gently
downwards to secure into place.
• Use the digital touch control ‘‘up’’ or ‘‘down’’
buttons to adjust the telescopic comb guide
to the required length.
• The cutting lengths are displayed on the LED
U
T
B
R
screen in ‘‘mm’’ – scroll through the
available length settings with the digital
touch controls. There are 24 length settings
available: 0.4mm-5.0mm in 0.2mm
increments
• Select your required length – the length
setting will then remain displayed on the
LED screen.
• Press the power button to switch the super
stubble on.
MEMORY FUNCTION
This stubble trimmer has a memory function
that stores the last chosen length setting. When
the unit is switched off the comb guide returns
to 0.4mm position. When the trimmer is
switched back on the comb guide automatically
moves up to the last chosen length setting.
TRAVEL LOCK FEATURE
The Conair For Men Super Stubble has a travel
lock feature which will lock all buttons from
activating accidently.
• To activate the travel lock, press and hold
the I/O button for 2 seconds until the time
display counts downs from 5 to 1. When the
countdown reaches 1, the lock signal is
shown.
• To de-activate the travel lock press and hold
the I/O button for 2 seconds until the time
display starts to count down from 5 to 1 and
the motor switches on and starts running.
The travel lock is now de-activated.
• When you place the unit in the charger, the
travel lock is automatically deactivated.
USING THE TRIMMER WITHOUT
THE COMB GUIDE
Using without the comb guide is ideal for
detailing/shaping and general tidying of edges.
• To detach the comb guide, gently hold the
trimmer in one hand and with your thumb
and index finger push up on each side of the
comb guide (fig. 1). Flip the comb guide to
the back of the unit, gently pull down and
secure under the latch to lock into place
(fig. 2). To release the comb guide, pull down
and move away from the latch (fig. 3).
PULL
fig. 1 fig. 2 fig. 3
• Switch the super stubble on by pressing the
‘‘power on’’ button. The LED will illuminate
and the blades will start to move.
• If you are looking for an ultra-close finish,
you can use the trimmer without the comb
guide. This will give you an extremely short
cut.
IMPORTANT: please note when using the
trimmer without the comb guide, the cutting
length will be below 0.4mm. The length setting
shown on the LED screen will no longer be
relevant when the comb guide is detached.
SUPER STUBBLERTM TOP TIPS
• Use on clean, dry hair.
• If possible, when using for the first time, try
and grow your facial hair for a few days
before cutting so you can trim down to a
level that is best for you.
• Set the cutting length as required.
• It is always best to start cutting with a longer
length first, then trim again if the length is
longer than desired.
• Hold the super stubble against the hair, the
teeth of the comb guide should be pointing
upwards and should be flat against the face.
• Move the trimmer upwards through the hair,
a little at a time, against the direction of hair
growth. The floating and contouring head
will follow the curves of your face to ensure
both accuracy and comfort.
• The super stubble will work most effectively
when cutting through the hair at its own
speed – never force through the hair. You
may experience a little resistance when
trimming the neck area, where hair is thicker
and grows in many different directions. This
is completely normal.
• Just like shaving, extra time should be given
when trimming under the neck area, as
again this is where hairs grow in many
different directions.
• Never switch the trimmer off whilst in the
hair.
CLEANING & MAINTENANCE
• Regular cleaning will maintain the high
performance of your super stubble.
• Switch off and remove the power cord if
connected.
• Detach the comb guide by gently lifting the
front of the comb guide from both sides and
flipping it over to the back of the unit and
locking it into position by clicking it securely
onto the fastener on the back of the handle.
• Use the cleaning brush supplied to brush
away any hair and debris. Do not use a
sharp object to clean the trimmer blade.
• The blades can be removed to aid cleaning.
• To remove the blades hold the handle of the
i-stubble with one hand, place your thumb
underneath the blades and push the blades
away from the handle.
• Gently blow away any hair trapped beneath
the blades.
• The blades can be rinsed under the tap.
After rinsing the blades they may need to be
oiled. See oiling instructions below.
• Before re-attaching blade
to the trimmer, ensure
the blades are dry and
moving blade is in the
centre. Please refer to
fig. 4.
• Please do not use any
chemical liquids when
cleaning the trimmer.
• Ensure you clean the blades after each use
and before storing away.
• It is highly recommended to oil the blades
from time to time with the oil provided. This
ensures optimum cutting performance. For
the first use you will need to use the oil
supplied with the product, unscrew the cap
and cut off the very end of the plastic tube
with a pair of scissors to release the oil. To
oil the blades ensure the unit is switched on.
Gently squeeze the oil tube and apply 2
fig. 4
drops of oil onto the blades. Leave the unit
on for a further few seconds to allow the oil
to thoroughly spread the length of the
blades. Switch off the unit and remove any
excess oil by gently dabbing with a cloth.
BATTERY DISPOSAL
This appliance contains a lithium ion battery. To
protect the environment, this appliance and its
battery must be disposed of safely. At the end
of its life, please take this appliance to a
recycling center, where the internal rechargeable battery should be removed by a professional and recycled separately. For more
information about the recycling of electrical
and battery-operated appliances, please
contact your local recycling or environmental
protection office or your household waste
disposal service. For specific enquiries
regarding the replacement of batteries in this
product, please contact our Conair Customer
Care Line.
CONTAINS LITHIUM ION
R
/
E
E
C
L
Y
C
C
Y
L
C
É
E
R
L i ION
BATTERY. MUST BE COLLECTED,
E
RECYCLED OR DISPOSED OF
PROPERLY. DO NOT DISPOSE
OF IN THE MUNICIPAL WASTE.
LIMITED THREE YEAR WARRANTY
Conair will repair or replace (at our option) your unit
free of charge for 36 months from the date of purchase if the appliance is defective in workmanship
or materials.
To obtain service under this warranty, return the defective product to the service centre listed below that is
nearest you, together with your purchase receipt and
$7.50 for postage and handling. In the absence of
a purchase receipt, the warranty period shall be 36
months from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR
LIABILITIES, INCLUDING BUT NOT LIMITED TO THE
IMPLIED W
FITNESS FOR A PARTICULAR PURPOSE, SHALL BE
LIMITED IN DURATION TO THE 36 MONTH DURATION OF
THIS WRITTEN, LIMITED WARRANTY.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
FOR BREACH OF THIS OR ANY OTHER WARRANTY,
EXPRESS OR IMPLIED, WHATSOEVER.
This warranty gives you specific legal rights, and you
may also have other rights, which vary from province
to province.
SERVICE CENTRE:
CONAIR CONSUMER PRODUCTS ULC
100 Conair Parkw
Woodbridge Ontario, L4H OL2
©2014 CONAIR CONSUMER PRODUCTS ULC
For more information on any Conair product call:
1-855-926-6247 (1 8559 CONAIR)
Visit our Web site: www.conaircanada.ca
Consumer Call Centre E-mail:
Consumer_Canada@Conair.com
Printed in China
14CN146392
ARRANTY OF MERCHANTABILITY AND
ay
SUPERSTUBBLER
LITHIUM ION SERIES
Have a Question?
Please do not return this product to the retailer.
Call Us First!
Our customer service and product experts are
ready to answer ALL your questions.
Please call our TOLL-FREE customer service
number at: 1-855-926-6247
or visit us online at
www.conaircanada.ca
Model GMT1000C
Instruction Booklet
TM
;44+
Loading...