Comtrend PG9182AC User Manual

Version A1.0, Jan. 29, 2018

User Manual of web UI Management

PG-9182AC

Powerline Ethernet WiFi Adapter

COPYRIGHT

Copyright ©2013/2014 by this company. All rights reserved. No part of this
Publication may be reproduced, transmitted, transcribed, stored in a retrieval system,
or translated into any language or computer language, in any form or by any means,
electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the
prior written permission of this company

This company makes no representations or warranties, either expressed or implied,
with respect to the contents hereof and specifically disclaims any warranties,
merchantability or fitness for any particular purpose. Any software described in this
manual is sold or licensed "as is". Should the programs prove defective following their
purchase, the buyer (and not this company, its distributor, or its dealer) assumes the
entire cost of all necessary servicing, repair, and any incidental or consequential
damages resulting from any defect in the software. Fur ther, this company reserves
the right to revise this publication and to make changes from time to time in the
contents thereof without obligation to notify any person of such revision or changes.

Preface

This manual provides information relate d to the installation and operation of this
device. The individual reading this manual is presumed to have a basic
understanding of telecommunications terminolo gy and concepts.

If you find the product to be inoperab le or malfunctioning, please contact technical
support for immediate service by email at [e-mail]

For product update, new product release, manual revision, or software upgrades,
please visit our website at http://www.comtrend.com

1

Copyright

Copyright©2017 Comtrend Corporation. All rights reserved. The information
contained herein is proprietary to Comtrend Corporation. No part of this document
may be translated, transcribed, reproduced, in any form, or by any means without
prior written consent of Comtrend Corporation.

This program is free software: y ou can redistribute it and/or modify it under the terms
of the GNU General Public License as published by the Free Software Foundation,
either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTIC ULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this
program. If not, see http://www.gnu.org/licenses/

NOTE: This document is subject to change without notice .

Protect Our Environment

This symbol indicates that when the equipment has reac hed the end of its
useful life, it must be taken to a recycling centre and processed separate
from domestic waste.

The cardboard box, the plastic contained in the packaging, and the parts
that make up this PLC can be recycled in accordance with regionally
established regulations. Never dispose of this electronic equipment along
with your household waste; you may be subject to penalties or sanctions
under the law. Instead, please be responsible and ask for disposal
instructions from your local government.

Save Our Environment

When this equipment has reached the end of its useful life, it must be taken to a
recycling centre and processed separately from domestic waste.

The cardboard box, the plastic in the packaging, and the p a rts that make up this
device can be recycled in accordance with regionally established regulations. Never
dispose of this electronic equipment along with your household waste.
You may be subject to penalties or sanctions under the law. Instead, ask for disposal
instru ctions from your municipal government.

Please be responsible and protect our environment.

2

CATALOG

CHAPTER 1: GENERAL INFORMATION .......................................................................................... 4

1-1 SAFETY INFORMATION ..................................................................................................................... 4

1-2 SYSTEM REQUIREMENTS .................................................................................................................. 7

CHAPTER 2: SYSTEM AND NETWORK SETUP .............................................................................. 8

2-1 CONNECTING TO POWER LINE ACCESS POINT BY WEB BROWSER .................................................... 8

2-2 CONNECTING TO WEB MANAGEMENT INTERFACE ......................................................................... 9

2-3 VIEW SYSTEM INFORMATION ......................................................................................................... 10

2-3 NETWORK SETTINGS ...................................................................................................................... 12

2-4 STATION LIST .................................................................................................................................. 12

2-5 TIME SETTINGS ............................................................................................................................... 13

2-6 ACCESS POLICY .............................................................................................................................. 13

2-7 ADMINISTRATION ............................................................................................................................ 14

2-8 MONITOR ........................................................................................................................................ 15

2-9 LOGOUT .......................................................................................................................................... 15

CHAPTER 3: WIRELESS CONFIGURATIONS ................................................................................... 16

3-1 2.4G WIRELESS SETTINGS ............................................................................................................. 16

3-2 2.4G SECURITY SETTINGS .............................................................................................................. 17

3-3 2.4G WPS SETTINGS ...................................................................................................................... 18

3-4 5G WIRELESS SETTINGS ................................................................................................................ 18

3-5 5 G SECURITY SETTINGS ................................................................................................................ 19

3-6 5G WPS SETTINGS ......................................................................................................................... 20

CHAPTER 4: CLI COMMANDS FOR TR069 SETTIN GS VIA TELNET ........................................... 21

nvram_get 2860 TR069InformInterval .............................................................................................. 21

The setup images used in this manual are for reference only. The contents of these images may vary according to firmware version. The official image contents are based on the newest firmware version.

3

Chapter 1: General Information

1-1 Safety Information

In order to keep the safety of users and your properties, please follow the
following safety instructions:

1. This power line access point is designed for indoor use only; DO NOT place
this power line access point outdoor.

2. DO NOT put this power line access point at or near hot or humid places, like
kitchen or bathroom. Also, do not leave this power line access point in the car
under direct sunlight.

3. DO NOT pul l any connect ed cable wi th forc e; disconn ect it from the pow er li ne
access point first.

4. If you want to pl ace this power line acces s point at high plac es or hang on the
wall, please make s ure the power line ac cess poi nt is fir mly secured. Falli ng from
high places would damage the power line access point and its accessories, and
warranty will be void.

5. There’s no user -serviceable part inside the access point. If you found that the
power line access point is not working properly, please contact your dealer of
purchase and ask for h el p. D O N OT disassemble t he acc ess poi nt , warranty will
be void.

6. If the power line access point falls into water when it’s powered, DO NOT use
your hand to pick it up. Switch the electrical p ower off before you do anything, or
contact an experienced electrical technician for help.

WARNING

• Disconnect the PLC from the power source before servicing

• For indoor user only

• Do NOT open the casing

• Do NOT use near water

• Do NOT insert sharp objects into the adapter’s socket

• Socket maximum output is 15A

Power Specifications:
I/P： 100-240Vac, 50/60Hz, 15A

O/P：100-240Vac, 50/60Hz, 15A

4

Federal Communications Commission (FCC) Statement

15.21
You are cautioned that changes or modifications not expressly approved by the part responsible
for compliance could void the user’s authority to operate the equipment.

15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. Howev er, there is no guarant ee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

-Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:

1) this device may not cause interference and

2) this device must accept any interference, including interference that may cause undesired
operation of the device.

FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

2. This equipment complies with RF radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 20 cm between the radiator and your body.

5

ISED

Canadian Notice

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canad a’s licence-exempt RSS(s). Operation is subject to
the following two conditions:

1. This device may not cause interference.

2. This device must accept any interference, including interference that may cause

undesired operation of the device.

Avis Canadien

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR
d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

1. L’appareil ne doit pas produire de brouillage;

2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le br ouill age es t

susceptible d’en compromettre le fonctionnement.

Caution: Exposure to Radio Frequency Radiation.

1. To comply with the Canadian RF exposure compliance requirements, this device

and its antenna must not be c o-located or operating in conjunction with an y other
antenna or transmitter.

2. To comply with RSS 102 RF exposure compliance requirements, a separation

distance of at least 20 cm must be maintained between the antenna of this device
and all persons.

Attention: exposition au rayonnement radiofréquence.

1. Pour se conformer aux exigences de conformité RF canadienne l'exposition, cet
appareil et son antenne ne doivent pas être co-localisés ou fonctionnant e n
conjonction avec une autre antenne ou transmetteur.

2. Pour se conformer aux exigences de conformité CNR 102 RF exposition, une
distance de séparation d'au moins 20 cm doit être maintenue entre l'antenne de
cet appareil et toutes les personnes.

Operation in the band 5150-5250 MHz is only for indoor use to reduce the
potential for harmful interference to co-channel mobile satellite systems.

La bande 5 150-5 250 MHz est réservés uniquement pour une utilisation à l'intérieur afin de réduire
les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.

For the frequency 5600-5650 MHz, no operation is permitted
Pour la fréquence 5600-5650 MHz, aucune opération est autorisée.

6