usuarioparaoperareste.dispositivo CUATELA:Cambiosómodificacionesnoexpresamenteaprobadasporlaparteresponsabledelcumplimientodelanorma,puedenanularlaautorizaciondel (2)estedispositivopuedeaceptarcualquierinterferenciarecibida,inclusointerferenciaquepuedacausarmalfuncionamientoal.equipo (1)estedispositivonopuedecausarinterferencia.dañosa Estedispositivoestásujetoalaseccion15delasreglasde.FCCElfuncionamientoestásujetoalassiguientescondiciones;
Solamente)
www.firstechllc.com
User Manual
Applicable to the following remote(s)
All 1way 1Button Remotes
www.compustar.com
Usuario
com.compustar.www |
com.firstechllc.www |
Remote |
FCC ID Number (US Only) |
IC ID Number (International Only) |
|
|
|
1BAMR |
VA5JR760AM433 |
7087A-R760AM |
1BAMR-Chrome |
VA5JR760AM433 |
7087A-R760AM |
1W900SHR-760 |
VA5JR760A915 |
7087A-R760A915 |
|
|
|
t @ @ @ @p @QU@ @ @fcc@ N@@o @ @ @ @ @ @ [
HQI@t @ @ @ @ @ @ N
HRI@t @ @ @ @ @ @ L@ @ @ @ @ @ @ N
cautionZc @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ N
Table of Contents
i |
g @s @f |
V |
|
|
6 |
w @c |
S |
6 |
|
|
6 |
q @r |
T |
7 |
|
||
Valet Mode |
4 |
7 |
r @m @M@b @r |
5 |
8 |
o @b @r |
U |
8 |
|
||
1 Button Remote Functions |
5 |
10 |
|
|
|
|
|
10 |
|
|
11 |
|
|
12 |
Introduction
Thank you for purchasing a Firstech system for your vehicle. In order to truly enjoy the benefits of this system, we recommend that you thoroughly review the following manual. Please note that this manual applies to the all Firstech 1 Button Remote Starter systems only. 1 Button remotes offer keyless entry and remote start only. There may also be features listed in this manual that require additional installation or programming before they can become active. If you have any questions, please contact the original place of purchase. For further information you may also contact our customer support center by calling 888-820-3690.
Warranty Coverage
Caution: The Manufacture’s warranty will be voided if this product is installed by anyone other than an authorized dealer. For complete warranty
!details visit www.compustar.com or the last page of this manual. Firstech remotes carry a 1 year warranty from original date of purchase.
Warranty registration can be completed online by visiting www.compustar.com. Please complete the registration form within 10 days of purchase. We no longer include a mail in warranty registration card with each unit - registration must be done online. To verify that an authorized dealer installed your system, we highly recommend that you keep a copy of the original proof of purchase, such as the dealer invoice in a safe place.
ByFirstech,LLC 2 |
3 ByFirstech,LLC |
Quick Reference
v @m
or loaning your vehicle to others, your system should be placed in Valet Mode. Valet Mode prevents the system from remote starting and functions.
IMPORTANT: While in Valet Mode the remote will still control power lock and unlock systems. The parking lights will not flash.
can be put into valet one of two ways:
You can put the system into valet by turning the ignition key <on> and then <off> five times within 7 seconds. The parking lights will flash once to confirm the system is in Valet Mode. Shortly after the first flash, the parking lights will flash twice.
2. (Optional Feature) If you purchased the secure valet switch option, you will not be able to put the system into valet until the proper code has been entered with the secure valet switch. Until programmed, the default code is (3, 3).
You can exit Valet Mode through the following procedure:
On either 1 Button remote, turn the vehicle’s ignition on and then tap the button 5 times, waiting a second between each tap. Your vehicle will flash the parking lights twice and exit valet mode.
r @m Mb @r
this system requires is remote control battery replacement. No programming is required when replacing the
Remotes:
the small Phillips screw located on the back of the remote. Once the screw has been removed, gently pull the remote apart being careful to not board. The 1BAMR and 1BAMR-C and 1B900SHR-760 requires two CR2016 batteries. These specialty batteries can be purchased from your
dealer or an electronics store.
Qw @b @r @f 
Button |
Duration |
Function / Description |
|
1.0 second |
Lock/Arm. Tap again to Unlock/Disarm your vehicle |
|
3.5 seconds |
Activates the remote start. Repeat and remote start will shut off. |
|
5 taps |
Takes system out of Valet Mode. Will not put into Valet Mode |
ByFirstech,LLC |
4 |
5 ByFirstech,LLC |
General System Functions
The remote transmitter functions have been predetermined and programmed from the factory. The single button configuration allows for keyless entry and/or remote start functionality. Although other Firstech systems have numerous functions and capabilities, please keep in mind that your system has the option for future upgradeability to a 2 Way system.
Sending Commands
When in range, and the button has been pressed, the remote bright blue LED will illuminate and vehicle’s parking lights will flash. For example, to send a remote start command from the remote, hold down the single button for 3.5 seconds. The remote’s bright blue LED will come on solid and then flash.
a @l Oa @ @u Od
to lock/arm and unlock/disarm. The remote bright blue LED will flash four times indicating the signal has feature is optional and may require additional programming and/or installation. Please check with your dealer for
a @t @r @ @f
Hold the single button for 3.5 seconds to remote start an automatic transmission vehicle. If you are in range and if the vehicle is ready to remote start, the vehicle parking lights will flash once.
If holding the single button for 3.5 seconds to remote start the vehicle. If you see three parking light flashes, there is a remote start error. Refer to the “remote start error diagnostic” on the last page of this manual for details.
Upon receiving confirmation that your vehicle is running, the parking lights will light solid. The remote start run time can be programmed for 3, 15, 25, or 45 minutes - ask your local Firstech dealer to adjust Option 2-7 if you would like a run time other than 15 minutes (default).
IMPORTANT: The vehicle’s key must be inserted into the ignition and turned to the <on> position prior to driving your vehicle. If the foot brake is depressed prior to the key being in the <on> position, the vehicle will shut off.
m @t @r @s @f @Hr @m I
In order to remote start a manual transmission vehicle, the system must first be set in Reservation Mode. Reservation Mode must be set each and every time you want to remote start a manual transmission vehicle. The purpose of Reservation Mode is to leave the transmission in neutral before exiting the vehicle.
IMPORANT
The transmission must be left in the neutral position. |
The vehicle’s door pins must be in working order. |
The vehicle’s windows must be rolled up. |
Do not set reservation mode or remote start with people in the vehicle. |
Do not install this remote start on a manual transmission vehicle that has a convertible or removable top.
Activating Reservation Mode
STEP 1: While the vehicle is running, place the transmission in neutral, set the emergency / parking brake, and remove pressure from the foot brake.
STEP 2: Remove the key from the vehicle’s ignition. The vehicle’s engine should remain running even after the key has been removed. If the vehicle does not remain running visit your local authorized Firstech dealer for service.
ByFirstech,LLC |
6 |
7 ByFirstech,LLC |
STEP 3: Exit the vehicle and close the door. The vehicle’s engine should shut off within upon closing the last door. If the vehicle’s engine does not shut off, your door trigger may be functioning improperly. Do not use the remote start feature and take your vehicle to a local authorized Firstech dealer for service.
IMPORTANT: By default, the system will lock/arm the vehicle upon setting reservation mode. Take to not lock your keys inside the vehicle.
Cancelling Reservation Mode
Reservation mode will be cancelled for the following reasons;
You did not activate the parking brake prior to turning off the ignition.
You pressed the foot brake after the key was removed from the ignition.
You released the parking brake after the key was removed from the ignition.
You entered valet mode, opened the vehicle’s door, hood, or trunk.
Reservation Mode Settings
Reservation mode settings can be changed. It is recommended that reservation mode settings are programmed by your local authorized Firstech dealers. Default 1: Locks doors when reservation mode is set.
Option 2: Does not lock doors when reservation mode is set.
Option 3: Reservation mode sets 10 seconds after the last door is closed, as opposed to immediately.
This option will allow you to access the vehicle’s rear doors, trunk or hatch prior to the system setting reservation and passively locking/arming.
anti@g @O@s @k
The optional Anti-Grind/Starter Kill feature prevents you from accidentally grinding your vehicle’s starter motor when taking over with the key. This feature requires additional installation and programming. Also your dealer can program a basic security feature that prevents your vehicle from starting when it is locked/armed. Please see your dealer for more details.
s @v @s
The optional Secure Valet Switch prevents the remote start from being put into valet mode through cycling the ignition on/off five times. The Secure Valet Switch is more secure than traditional toggle / valet switches because it requires a two digit code. Follow the below procedures to program your Secure Valet Passcode:
STEP 1: Turn on Option 3-10-III. (Dealer programmed option)
STEP 2: Turn ignition key to the <on> position.
STEP 3: Hold down the valet switch for 1.5 seconds. The LED on the valet switch will begin to flash rapidly with successful completion of this step.
STEP 4: Enter the first digit of the desired two digit pass code by depressing the switch the number of times that coordinates with the desired first number. For example, to enter 3, depress the switch 3 times, then wait.
STEP 5: The LED will confirm the first number by flashing BLUE slowly. Once the LED begins to flash rapidly, enter your second number by repeating step 4.
STEP 6: Turn the ignition off - the Secure Valet Switch is now programmed. Follow steps 3 - 5 to enter your Secure Valet code.
ByFirstech,LLC 8 |
9 ByFirstech,LLC |
Loading...