Component Hardware KL86-8005-CA1 User Manual

®

®

THE POWER OF SILVER

2 9/16

[65mm]

AS REQUIRED

1 1/4" DIA.

7/8" DIA.

(32mm)

(22mm)

- 1 1/2" DIA.
(38mm)

- 1 1/2" DIA.
(38mm)

ÿ3/16"
(5mm)

(16mm)

5

[127mm]

3 3/16

[82mm]

AS REQUIRED

5/8"

COMPLIES WITH:

ASME A112.18.1-2005

CSA B125.1-05
NSF/ANSI 61/9, ANNEX G
SECTION 116875 OF THE

CALIFORNIA HEALTH & SAFETY CODE

(COMMONLY KNOW AS AB1953)

VERMONT ACT 193

UNIFORM PLUMBING CODE

ADA

SPECIFIER ITEM NO. ________________

CHG PART NO. _______________________

Encore® Low Lead Widespread Faucet for Pop-Up Drain
with 5” Cast Spout and Lever Handles

KL86 - 8005 - C __ 1

ENGINEERING SPECIFICATION:

Polished chrome plated cast brass widespread faucet with total lead
content less than 0.25% by weighted average. Adjustable centers
from 5” to 24” (127mm to 610mm), a 5-3/8” (137mm) centerline rigid
cast brass spout and quarter turn ceramic disc cartridges. Unit is
furnished with color-coded, SANIGUARD® treated handles, mounting
hardware and 1/2” (13mm) NPSM coupling nuts for standard lavatory
risers. Widespread accommodates installations up to 1-1/2” (38mm)
thick. Base gaskets with sealant recess and Anti-rotation pin for
optional installation included and 1-1/4” (32mm) pop-up drain.

TECHNICAL/PERFORMANCE SPECIFICATIONS:

Commercial Specication Grade

Gaskets and Seals Rated Commercial Hot 180°F
1/2” NPS Male Inlets w/1/2” tube compression seals & nuts
Operating Temperature: 40 - 180°F
Operating Pressure: 15 - 125psi

* KL Series low lead faucets are NSF annex G approved.

Dimensions shown in inches (mm) are for reference only and are subject to change.

Part Numbers:

1890 Swarthmore Avenue, PO Box 2020, Lakewood, New Jersey 08701 Phone: [phone], Fax: [phone]

KL86 - 8005 - C __ 1

www.componenthardware.com

Outlet

A 0.5 GPM PCA Spray Vandal Resistant
B 1.5 GPM Max Laminar Vandal Resistant
C 0.5 GPM PCA Spray
D 1.5 GPM Max Laminar
E 2.2 GPM Max Aerator