® |
LOW |
|
LEAD PLUMBING * |
SPECIFIER ITEM NO. ________________ |
|
CHG PART NO. _______________________ |
Section 9-G |
|
Certified To NSF/ANSI 61 |
® |
ADA |
THE POWER OF SILVER |
COMPLIES WITH:
ASME A112.18.1-2005
CSA B125.1-05
NSF/ANSI 61/9, ANNEX G
SECTION 116875 OF THE
CALIFORNIA HEALTH & SAFETY CODE (COMMONLY KNOW AS AB1953)
VERMONT ACT 193
UNIFORM PLUMBING CODE
35 1/2 (902mm)
8
(203mm)
Encore® Low Lead Wall Mount Pre-Rinse Assembly
KL53 - 1000
ENGINEERING SPECIFICATION:
Polished chrome plated brass with total lead content less than 0.25% by weighted average
Wall mount faucet - 8” adjustable centers
1/4 Turn Compression valves with check valves Lever handles with SANIGUARD® treatment
S/S flex hose with santoprene reinforced hose
Stainless steel strain relief - patented O-ring seals - patented
Standard full spray pattern 1.2 GPM spray face installed
Hold open ring and hose hook included
TECHNICAL/PERFORMANCE SPECIFICATIONS:
Commercial Specification Grade
Gaskets and Seals Rated Commercial Hot 180°F 1/2” NPS Female Inlets
Operating Temperature: 40 - 180°F Operating Pressure: 15 - 125psi
Handle and Grip: SANIGUARD® treatment
6 1/2 (165mm)
16 7/8 (429mm)
*KL Series low lead faucets are NSF annex G approved.
Dimensions shown in inches (mm) are for reference only and are subject to change.
1890 Swarthmore Avenue, PO Box 2020, Lakewood, New Jersey 08701 Phone: 800-526-3694, 732-363-4700, Fax: 732-364-8110 www.chgusa.com
Loading...