Page 1
®
®
THE POWER OF SILVER
Certified To NSF/ANSI 61
Section 9-G
LOW
LEAD PLUMBING
(16mm)
5/8”
3/16"
(5mm)
(38mm)
TO 1-1/2" DIA.
(38mm)
TO 1-1/2" DIA.
(22mm)
(32mm)
7/8" DIA.
1-1/4" DIA.
AS REQUIRED
AS REQUIRED
4 -3/16"
(106mm)
A
C
B
AS REQUIRED
1-1/4"
(32mm)
MAXIMUM
THICKNESS
COMPLIES WITH:
ASME A112.18.1-2005
CSA B125.1-05
NSF/ANSI 61/9, ANNEX G
SECTION 116875 OF THE
CALIFORNIA HEALTH & SAFETY CODE
(COMMONLY KNOW AS AB1953)
VERMONT ACT 193
UNIFORM PLUMBING CODE
ADA
SPECIFIER ITEM NO. ________________
CHG PART NO. _______________________
Low Lead Widespread Rigid Gooseneck Metering Faucet
KL84 - 82__ __ - R__
ENGINEERING SPECIFICATION:
Polished chrome plated cast brass widespread faucet with total
lead content less than 0.25% by weighted average. 5” – 12”
adjustable inlet centers, adjustable metering valves with
SANIGUARD® treated handles, rigid gooseneck spout and
0.5 gpm [1.9 lpm] pressure compensating spray outlet.
Adjustable metering valves set to 0.25 gal per cycle at 60 psi.
TECHNICAL/PERFORMANCE SPECIFICATIONS:
Commercial Grade Polished Chrome Plated Cast Brass
Gaskets and Seals Rated Commercial Hot 180°F
½” NPSM Male Inlets w/ Compression Fittings
Operating Temperature Range: 40 - 180°F
Operating Pressure: 20 – 125psi
0.25 gal per cycle @ 60psi
* KL Series low lead faucets are NSF annex G approved.
Dimensions shown in inches (mm) are for reference only and are subject to change.
Part Numbers:
KL84 - 82__ __ - R__
Outlet
Spouts
3-1/2” Rigid Gooseneck Spout 00
8-1/2” Rigid Gooseneck Spout 01
6” Rigid Gooseneck Spout 02
1890 Swarthmore Avenue, PO Box 2020, Lakewood, New Jersey 08701 Phone: 800-526-3694, 732-363-4700, Fax: 732-364-8110
www.componenthardware.com
A 0.5 GPM PCA Spray, Vandal Resistant
C 0.5 GPM PCA Spray
Loading...