®
Certified To NSF/ANSI 61
Section 9-G
LOW
LEAD PLUMBING
4"
(102mm)
1/2" NPSM COUPLING
(127mm TO 610mm)
5" TO 24"
4-1/2"
(114mm)
4-3/16"
(106mm)
MAXIMUM
THICKNESS
1-1/4"
(32mm)
5/8”
(16mm)
3/16"
(5mm)
(22mm)-(38mm)
7/8" DIA.- 1-1/2" DIA.
AS REQUIRED
AS REQUIRED
10"
(254mm)
8"
(203mm)
(32mm)-(38mm)
1-1/4" DIA.- 1-1/2" DIA.
COMPLIES WITH:
ASME A112.18.1-2005
CSA B125.1-05
NSF/ANSI 61/9, ANNEX G
SECTION 116875 OF THE
CALIFORNIA HEALTH & SAFETY CODE
(COMMONLY KNOW AS AB1953)
VERMONT ACT 193
UNIFORM PLUMBING CODE
ADA
SPECIFIER ITEM NO. ________________
CHG PART NO. _______________________
Encore® Low Lead Widespread Faucet with 8” Swivel Bent
Riser Spout and 4” Wrist Blade Handles
KL84-8108-BE4
ENGINEERING SPECIFICATION:
Polished chrome plated cast brass widespread deck mount faucet with
total lead content less than 0.25% by weighted average. 5” [127mm]
to 24” [610mm]; an 8” [203mm] centerline swivel bent riser spout
and quarter turn ceramic disc cartridges w/inline check valves. Unit
is furnished with a 2.2 GPM [8.3 L/M] aerator (complying with ANSI
A112.18.1 Standard for ow) and a full ow stream bubbler included.
Color-coded 4” wrist blade handles are treated with SANIGUARD®.
Mounting hardware supplied with 1/2” [13mm] NPSM coupling nuts for
standard lavatory risers. Widespread accommodates installations up to
1-1/4” [32mm] thick. Base gaskets with sealant recess & Anti-rotation
pin for optional installation included.
TECHNICAL/PERFORMANCE SPECIFICATIONS:
Commercial Specication Grade
Gaskets and Seals Rated Commercial Hot 180°F
1/2” NPS Male Inlets w/1/2” tube compression seals & nuts
Operating Temperature: 40 - 180°F
Operating Pressure: 15 - 125psi
* KL Series low lead faucets are NSF annex G approved.
Dimensions shown in inches (mm) are for reference only and are subject to change.
1890 Swarthmore Avenue, PO Box 2020, Lakewood, New Jersey 08701 Phone: 800-526-3694, 732-363-4700, Fax: 732-364-8110
www.componenthardware.com